Journals Conference proceedings News
Authors
Bulletin of BSTU Transport engineering Science intensive technologies in mechanical engineering Automation and modeling in design and management Ergodesign
Rubrics
Submit manuscript
Ensuring and improving the quality of engineering and aerospace products
Title (English)
ENSURING AND IMPROVING THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS
ISBN
978-5-907271-27-2 (print)
DOI
https://doi.org/10.30987/978-5-907271-27-2
Status
Published

MATERIAL SCIENCE ASPECTS OF ENSURING AND IMPROVING THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS

INFLUENCE OF ISOTHERMAL QUENCHING ON THE STRUCTURE AND PERFORMANCE PROPERTIES OF HIGH-STRENGTH CAST IRON WITH SPHERICAL GRAPHITE
Authors
Makarenko Konstantin, Zentsova Ekaterina
Status
Published
Pages
с 10 по 14
Published
13.04.2020
MATERIAL SCIENCE ASPECTS OF HOT CRACK FORMATION IN STEEL CASTINGS OF RAILWAY TRANSPORT
Authors
Makarenko Konstantin, Kuzovov Sergey Sergeevich
Status
Published
Pages
с 15 по 19
Published
13.04.2020
MODELING THE PROCESS OF DESTRUCTION OF GRAPHITIZED CAST IRON
Authors
Makarenko Konstantin, Nikitin Alexander
Status
Published
Pages
с 20 по 24
Published
13.04.2020
INVESTIGATION OF THE INFLUENCE OF THE CHEMICAL COMPOSITION ON THE MECHANICAL PROPERTIES OF THE TITANIUM ALLOY VT16
Authors
Tul'pinova Nina
Status
Published
Pages
с 25 по 29
Published
13.04.2020
GRADIENT COMPOSITE MATERIALS AND COATINGS BASED ON ALUMINUM AND COPPER ALLOYS
Authors
Vityaz Petr, Senyut Vladimir, Borodavko V., Gretsky Nikolai, Semenenko Dmitriy, Kheifets M., Kolmakov Aleksey
Status
Published
Pages
с 30 по 34
Published
13.04.2020
TECHNOLOGY FOR APPLYING COMPOSITE COATINGS IN COMBINED ELECTROPHYSICAL FIELDS
Authors
Vityaz Petr, Kheifets M., Gretsky Nikolai, Hil'ko Dmitriy
Status
Published
Pages
с 35 по 39
Published
13.04.2020
INVESTIGATION OF THE TANGENT OF THE DIELECTRIC LOSS ANGLE OF POLYURETHANE COMPOSITE MATERIALS
Authors
Pesterova Liliya Fedorovna, Shakirova Ol'ga
Status
Published
Pages
с 40 по 44
Published
13.04.2020
EFFECT OF NONMETALLIC INCLUSIONS ON THE IMPACT STRENGTH OF 20GL STEEL CAR CASTINGS
Authors
Bogadnov Roman Alekseevich, Davydov Sergey Vasil'evich, Chuhchin Dmitriy
Status
Published
Pages
с 45 по 49
Published
13.04.2020
INFLUENCE OF MATRIX GRAIN PARAMETERS ON THE IMPACT STRENGTH OF 20GL STEEL CAR CASTINGS
Authors
Bogdanov Roman Aleksandrovich, Davydov Sergey, Panov Aleksey Gennad'evich
Status
Published
Pages
с 50 по 55
Published
13.04.2020
THE EFFECT OF THE CRIMPING PRESSURE OF THE LIQUID METAL AT CRYSTALLIZATION AND STRUCTURE FORMATION
Authors
Denisov Maksim
Status
Published
Pages
с 56 по 61
Published
13.04.2020

ENSURING AND IMPROVING THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS IN THE DESIGN PROCESS

RAPID ASSESSMENT METHOD IN THE PROCESS OF DESIGNING LIFTING MACHINES
Authors
Ancev Vitaliy, Vorobyov Alexey
Status
Published
Pages
с 62 по 66
Published
13.04.2020
THE DRAWBACKS OF THE LUBRICATION SYSTEMS OF THE CREST WHEELSET OF THE LOCOMOTIVE
Authors
Shalygin Mikhail, Vashchishina Anna
Status
Published
Pages
с 67 по 70
Published
13.04.2020
ENGINE CONTROL SYSTEM OF A SHIP'S CRANE WINCH FOR STABILIZING THE SPATIAL POSITION OF OBJECTS UNDER THE INFLUENCE OF PITCHING
Authors
Dawlod Igor, Kiper Alexander Victorovich
Status
Published
Pages
с 71 по 76
Published
13.04.2020
APPLICATION OF COMPUTER MODELS IN THE DESIGN AND MODERNIZATION OF AUTOMATIC COUPLING ABSORBING DEVICES
Authors
Boldyrev Aleksey, Zhirov Pavel, Altuhov Vladimir
Status
Published
Pages
с 77 по 81
Published
13.04.2020
COMPUTATIONAL AND EXPERIMENTAL EVALUATION OF THE DURABILITY OF SLIDING BEARINGS BASED ON THE SYSTEM OF CRITERIA FOR DAMAGE TO FRICTION SURFACES
Authors
Zernin Mikhail
Status
Published
Pages
с 82 по 85
Published
13.04.2020
CALCULATED ESTIMATION OF PARAMETERS OF INTERACTION OF SURFACES OF TRIBO NODES ON THE EXAMPLE OF SLIDING BEARINGS
Authors
Zernin Mikhail, Babin Aleksandr, Rybkin Nikolay
Status
Published
Pages
с 86 по 91
Published
13.04.2020
GENERAL APPROACH TO SOLVING THE PROBLEM OF INCREASING THE SERVICE LIFE OF BALL JOINTS OF VEHICLES
Authors
Mikhaylov A., Lukichev A, Strel'nikov S A, Matvienko S, Арефьев Е.М.
Status
Published
Pages
с 92 по 96
Published
13.04.2020
OVERVIEW OF MODERN METHODS FOR DETECTING ARC DISCHARGES
Authors
Nikitin Aleksandr Sergeevich, Karaban Vadim
Status
Published
Pages
с 97 по 100
Published
13.04.2020
APPLICATION OF ANTIFRICTION MODENGYTM SOLID-OIL COATINGS FOR DETAILS OF SHUT-OFF VALVES OF TPP
Authors
Prudnikov Maksim
Status
Published
Pages
с 101 по 105
Published
13.04.2020
ELASTIC-DAMPING ROTOR SUPPORTS WITH DISCRETE OPERATION MODE CONTROL
Authors
Savin Leonid, Bychkov M, Kozyrev D
Status
Published
Pages
с 105 по 109
Published
13.04.2020
ANALYSIS OF EXISTING METHODS FOR CALCULATING CONTACT STIFFNESS ON THE EXAMPLE OF RAIL GUIDES
Authors
Fedukov Aleksandr
Status
Published
Pages
с 110 по 114
Published
13.04.2020

ENSURING AND IMPROVING THE QUALITY OF MACHINE-BUILDING AND AEROSPACE PRODUCTS IN THE PROCESS OF PRODUCTION PREPARATION

METHOD OF SELECTING THE OPTIMAL MANUFACTURING TECHNOLOGY FOR A PART AT THE STAGE OF TECHNOLOGICAL PRE-PRODUCTION
Authors
Bezyazychnyy Vyacheslav, Terekhova Alexandra
Status
Published
Pages
с 115 по 119
Published
13.04.2020
RESEARCH OF THE PROCESS OF MECHANICAL CUTTING WITH THE USE OF METHODS COMPUTER SIMULATION
Authors
Bolotin Alexey
Status
Published
Pages
с 120 по 124
Published
13.04.2020
METHODS FOR IMPROVING ENVIRONMENTAL FRIENDLINESS FLAT GRINDING
Authors
Vasilenko Ol'ga Arkad'evna, Vasilenko Yuriy
Status
Published
Pages
с 125 по 131
Published
13.04.2020
METHOD FOR DETERMINING THE PARAMETERS OF THE SURFACE LAYER OF PARTS AND THE DISTRIBUTION OF DIMENSIONAL TOLERANCES
Authors
Klaptsov Alexander, Klaptsova Lilia
Status
Published
Pages
с 132 по 136
Published
13.04.2020
DEVELOPMENT OF A GENERALIZED MODEL OF A BURR FORMED AS A RESULT OF MECHANICAL PROCESSING OF RADIO-ELECTRONIC EQUIPMENT PARTS
Authors
Tamarkin Mihail, Kolganova Elena, Agmurov Michael
Status
Published
Pages
с 137 по 140
Published
13.04.2020
DONETSK SCIENTIFIC SCHOOL TECHNOLOGISTS-MECHANICAL ENGINEERS: BASIC THE RESULTS AND PROMISING PROPOSALS
Authors
Mikhailov Alexander
Status
Published
Pages
с 141 по 146
Published
13.04.2020
SELECTING END MILLS FOR PROCESSING DIRECTIONALLY-HARDENED MATERIALS
Authors
Kirichek Andrey, Mokrickiy Bori, Antipin Dmitriy, Mokritskaya Elena, Fedonina Svetlana
Status
Published
Pages
с 147 по 154
Published
13.04.2020
ENGINEERING OF FRICTION SURFACES OF MACHINE PARTS BASED ON THEIR COMBINED PROCESSING
Authors
Mihalenko Tatiana
Status
Published
Pages
с 155 по 159
Published
13.04.2020
THE RELIABILITY PROCESS TO ENSURE THE PARAMETERS OF QUALITY OF SURFACES OF MACHINE PART
Authors
Nagorkin Maksim
Status
Published
Pages
с 160 по 164
Published
13.04.2020
TECHNOLOGICAL SUPPORT OF FAILURE TIME OF FORMING EQUIPMENT OF MOLDS AT THE MAIN STAGES OF THE LIFE CYCLE
Authors
Prokofiev Alexander, Polskiy Evgeniy, Abramov Roman, Osipova Ekaterina
Status
Published
Pages
с 165 по 168
Published
13.04.2020
TECHNOLOGICAL SUPPORT OF OPERATIONAL PROPERTIES OF COMPLEX-PROFILE HIGH-LOADED SECTORS OF THE EXTRUDER
Authors
Polskiy Evgeniy, Zvyagintsev Philip, Voronina Inna Dmitrievna, Mihnevich Dmitriy Nikolaevich
Status
Published
Pages
с 169 по 172
Published
13.04.2020
ASSEMBLY-BASED FEATURES DETAILS OF MACHINES AND MECHANISMS
Authors
Semenov Aleksandr Nikolaevich, Soboleva Ekaterina
Status
Published
Pages
с 173 по 177
Published
13.04.2020
THE CONCEPT OF AUTOMATION TO ENSURE THE PERFORMANCE CHARACTERISTICS OF PARTS FRICTION PAIRS USING INTEGRATED CAD
Authors
Sorokin Sergey
Status
Published
Pages
с 178 по 181
Published
13.04.2020
USING GRADIENT METHODS TO OPTIMIZE THE CALCULATION OF PROCESSING MODE PARAMETERS
Authors
Steposhina Svetlana, Fedonin Oleg, Siyanov Sergey
Status
Published
Pages
с 182 по 186
Published
13.04.2020
OBTAINING THE DEPENDENCE OF THE CUTTING FORCE ON THE CUTTING SPEED IN THE MANUFACTURE OF PARTS FOR GAS TURBINE ENGINES
Authors
Siyanov Sergey, Lebedeva Anastasia
Status
Published
Pages
с 187 по 190
Published
13.04.2020
TECHNOLOGICAL SUPPORT OF MULTI-CYCLE FATIGUE STRENGTH
Authors
Totay Anatoliy
Status
Published
Pages
с 191 по 194
Published
13.04.2020
NORMALIZING THE ACCURACY OF REFERENCE PRISMS
Authors
Filkin Dmitry
Status
Published
Pages
с 195 по 198
Published
13.04.2020
INTRODUCTION OF ADDITIVE TECHNOLOGIES FOR MANUFACTURING ENGINEERING PRODUCTS
Authors
Chemodurov Andrey
Status
Published
Pages
с 199 по 203
Published
13.04.2020

ENSURING AND IMPROVING THE QUALITY OF MACHINE-BUILDING AND AEROSPACE PRODUCTS DURING MANUFACTURING

IMPROVING THE QUALITY OF FINISHING ABRASIVE TREATMENT OF SILICON CARBIDE PLATES
Authors
Alehin Sergey
Status
Published
Pages
с 203 по 207
Published
13.04.2020
INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING
Authors
Kirichek Andrey, Barinov Sergey, Yashin Aleksandr
Status
Published
Pages
с 208 по 212
Published
13.04.2020
INFLUENCE OF INHERITED DEFORMATION PROPERTIES ON THE MICROSTRUCTURE AND DESTRUCTION OF THE METAL SURFACE LAYER
Authors
Blyumenstein Valeriy, Krechetov Andrey
Status
Published
Pages
с 218 по 222
Published
13.04.2020
ANALYSIS OF THE HARDENED SURFACE LAYER AFTER PROCESSING OF COMPLEX PROFILE AND TRADING INSTRUMENTS
Authors
Mitrofanova Kristina
Status
Published
Pages
с 213 по 217
Published
13.04.2020
HARDENING OF THE SURFACE LAYER OF RODS HYDRAULIC CYLINDERS FOR MINING EQUIPMENT ELECTROSPARK ALLOYING
Authors
Korotin Vladimir
Status
Published
Pages
с 223 по 226
Published
13.04.2020
INFLUENCE OF A STATIONARY PROCESS OF SURFACE PLASTIC DEFORMATION ON THE FATIGUE LIMIT
Authors
Uchaykin Sergey
Status
Published
Pages
с 227 по 229
Published
13.04.2020
REQUIREMENTS FOR FEEDING AND CLEANING SYSTEMS ELECTROLYTES TO ENSURE THE QUALITY OF PARTS FOR ELECTROCHEMICAL AND COMBINED PROCESSING
Authors
Boldyrev Alexander, Boldyrev Aleksandr
Status
Published
Pages
с 230 по 233
Published
13.04.2020
COMPARISON OF CONTACT STRESSES BETWEEN THE SURFACES OF THE DEFORMING ROLLER, THE CYLINDRICAL SLEEVE AND THE SUPPORT ROLLER WHEN PROCESSING PARTS ROLLING AND UNROLLING
Authors
Oteny Ya., Virt Andrey
Status
Published
Pages
с 234 по 237
Published
13.04.2020
STUDY OF THE AXIAL CUTTING FORCE WHEN CUTTING INTERNAL SCREW GROOVES BASED ON COMPUTER SIMULATION
Authors
Kuc Vadim, Gridin Dmitriy
Status
Published
Pages
с 238 по 242
Published
13.04.2020
METHOD FOR CALCULATING THE GEOMETRIC PARAMETERS OF A RADIAL FEED MILL FOR AXIAL MILLING OF RC PROFILE SHAFTS
Authors
Kuc Vadim, Ponomarev Vasiliy Vladimirovich
Status
Published
Pages
с 243 по 249
Published
13.04.2020
IMPROVING THE SERVICE LIFE OF CARBIDE INSERTS TURNING TOOLS DURING RESTORATION
Authors
Zakharov Leonid, Badakin Pavel Pavlovich
Status
Published
Pages
с 250 по 254
Published
13.04.2020
APPLICATION OF COMBINED ELECTRODE-BRUSH PROCESSING IN MECHANICAL ENGINEERING
Authors
Kotukov Evgeniy Vasil'evich, Kirillov Oleg, Smolentsev Evgeny
Status
Published
Pages
с 255 по 260
Published
13.04.2020
TECHNOLOGICAL SUPPORT FOR PRECISION MACHINING OF ULTRA-LONG SHAFTS ON A LATHE
Authors
Lebedev Valeriy, Oteny Ya., Kazak Vyacheslav Fedorovich, Al' Obaydi Luai Mohamed Radzhab
Status
Published
Pages
с 261 по 264
Published
13.04.2020
THE EFFECT OF THE FEED RATE ON THE CUTTING FORCE AND CHIP SHRINKAGE WHEN GRINDING A PART OF ROCKET TECHNOLOGY MADE OF TITANIUM ALLOY VT-6
Authors
Lamaeva Tat'yana Viktorovna, Kugul'tinov Sergey Danilovich
Status
Published
Pages
с 265 по 270
Published
13.04.2020
TECHNOLOGICAL ASSURANCE OF THE QUALITY AND SERVICE LIFE OF HEAVILY LOADED PARTS WHEN USING POLYCRYSTALLINE SV DIAMONDS FOR FINISHING OPERATIONS
Authors
Averchenkov Vladimir, Naduvaev Vladimir, Frolov Evgeniy
Status
Published
Pages
с 271 по 275
Published
13.04.2020
TECHNOLOGICAL QUALITY ASSURANCE OF EXTERNAL THREADS ON PARTS MADE OF "SIGRABOND" MATERIAL»
Authors
Prokofiev Alexander, Bulaev Aleksandr Valentinovich, Zaycev Maksim Andreevich
Status
Published
Pages
с 276 по 280
Published
13.04.2020
INVESTIGATION OF OUTPUT PARAMETERS OF HIGH-PERFORMANCE MILLING OF TITANIUM ALLOYS VT20 AND VT22
Authors
Serebrennikova Anzhela, Savilov Andrey
Status
Published
Pages
с 281 по 285
Published
13.04.2020
ENSURING AND IMPROVING THE QUALITY OF MECHANICAL ENGINEERING AND AEROSPACE PRODUCTS IN THE MANUFACTURE OF TOOTHED PROFILES USING WAVE DEFORMATION HARDENING
Authors
Kirichek Andrey, Soloviyov Dmitry, Fedonina Svetlana, Fedukov Aleksandr
Status
Published
Pages
с 286 по 291
Published
13.04.2020
PROVIDING NON-BURN COMBINED GRINDING OF MACHINE PARTS SURFACES
Authors
Shorohova Alla Aleksandrovna
Status
Published
Pages
с 292 по 295
Published
13.04.2020
COMBINED PROCESSING OF TRANSITION SECTIONS OF METAL-CERAMIC HEAT-PROTECTIVE COATING CS LRD
Authors
Smolentsev Evgeny, Panichev Evgeniy Vladimirovich
Status
Published
Pages
с 296 по 302
Published
13.04.2020

USE OF AUTOMATED CONTROL SYSTEMS, CONTROL AND DIAGNOSTICS FOR TECHNOLOGICAL SUPPORT AND IMPROVEMENT OF THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS

PROVIDING TESTING OF MINIATURE ELECTRICAL CONNECTORS
Authors
Akulov Pavel, Petreshin Dmitriy
Status
Published
Pages
с 303 по 307
Published
13.04.2020
CONTROL OF THE CUTTING TOOL STATE BASED ON THE ANALYSIS OF VIBRATION SIGNAL PARAMETERS IN THE FREQUENCY SPACE
Authors
Ancev Aleksandr, Yanov Evgeniy Sergeevich, Dang Hyu Chong, Gubin Vitaliy Yur'evich
Status
Published
Pages
с 308 по 312
Published
13.04.2020
APPLICATION OF FUZZY LOGIC AND NEURAL NETWORKS IN AUTOMATIC CUTTING PROCESS CONTROL SYSTEMS
Authors
Petreshin Dmitriy, Kovaleva Anna Al'yuertovna
Status
Published
Pages
с 313 по 318
Published
13.04.2020
ROBOTIZATION OF WAVE SMOOTHING OF MACHINE PARTS SURFACES
Authors
Butenko V.
Status
Published
Pages
с 319 по 323
Published
13.04.2020
DIAGNOSTICS OF TECHNOLOGICAL SYSTEMS OF METALWORKING ON PARAMETERS OF QUALITY AND OPERATIONAL PROPERTIES OF SURFACES OF DETAILS
Authors
Fedorov Vladimir, Nagorkin Maksim, Kovaleva Elena
Status
Published
Pages
с 324 по 328
Published
13.04.2020
PROBLEMS WITH SETTING UP (PROGRAMMING) CONTROLLERS FOR COMPRESSORS
Authors
Lysenkova Svetlana Nikolaevna
Status
Published
Pages
с 329 по 333
Published
13.04.2020
AUTOMATION OF COLLECTING FRUITS OF COLUMNAR APPLE CROPS BASED ON A MANIPULATING ROBOT
Authors
Chirkov Vadim Vladimirovich, Pimonov Andrey Yur'evich
Status
Published
Pages
с 334 по 339
Published
13.04.2020
DEVELOPMENT OF A MATHEMATICAL MODEL OF AN INDUSTRIAL ROBOT OF THE SCARA TYPE AND RESEARCH OF ROBOT KINEMATICS BASED ON IT
Authors
Borisov Vladislav Sergeevich
Status
Published
Pages
с 340 по 345
Published
13.04.2020
FAST DEFUZZIFICATION BASED ON THE LINEAR METHOD RELATIONSHIP SPACE
Authors
Bobyr Maksim, Luneva M Yu
Status
Published
Pages
с 346 по 350
Published
13.04.2020
MODERNIZATION OF THE 2A637F1 HORIZONTAL BORING MACHINE IN ORDER TO IMPROVE THE ACCURACY AND PRODUCTIVITY OF MACHINING PARTS
Authors
Dubov Andrey, Matlakhov Vitaliy, Petreshin Dmitriy
Status
Published
Pages
с 350 по 354
Published
13.04.2020
IMPROVING THE PERFORMANCE AND QUALITY OF RAPID PROTOTYPING DEVICES THROUGH CONTROL SYSTEMS
Authors
Matlakhov Vitaliy, Khandozhko Viktor, Fedonin Oleg
Status
Published
Pages
с 355 по 359
Published
13.04.2020
COMPUTERIZATION OF METROLOGICAL ASSURANCE OF GEOMETRIC PARAMETERS OF SURFACE QUALITY OF MACHINE PARTS
Authors
Fedorov Vladimir, Pyrikov Igor, Nagorkin Maksim, Toporkov Mihail, Tret'yakov Viktor Vladimirovich
Status
Published
Pages
с 360 по 365
Published
13.04.2020
METHODS FOR PROVIDING ANALYSIS OF VARIANT MATERIAL STRUCTURES OF HIGHLY LOADED PARTS
Authors
Bezyazychnyy Vyacheslav, Palamar' Irina
Status
Published
Pages
с 365 по 369
Published
13.04.2020
PRINCIPLES OF DEVELOPING EXPRESS METHODS FOR EVALUATING THE SURFACE QUALITY OF PARTS
Authors
Palamar' Irina, Yulin Sergey Sergeevich
Status
Published
Pages
с 370 по 373
Published
13.04.2020

ORGANIZATIONAL AND MANAGERIAL QUALITY ASSURANCE OF ENGINEERING AND AEROSPACE PRODUCTS

DEVELOPMENT OF QUALITY MANAGEMENT SYSTEMS IN MECHANICAL ENGINEERING
Authors
Miroshnikov Vyacheslav, Borbac' Nikolay
Status
Published
Pages
с 374 по 378
Published
13.04.2020
QUALITY ASSURANCE AND STANDARDIZATION OF TAPS
Authors
Barabanova Irina
Status
Published
Pages
с 379 по 383
Published
13.04.2020
TECHNICAL CONTROL AS A WAY TO ENSURE THE QUALITY OF PARTS IN ELECTROCHEMICAL SHAPING OPERATIONS
Authors
Boldyrev Alexander, Boldyrev Aleksandr
Status
Published
Pages
с 384 по 388
Published
13.04.2020
FUNDAMENTAL ELEMENTS OF IMPLEMENTING A RISK MANAGEMENT SYSTEM IN AN ORGANIZATION
Authors
Vilyaev S A
Status
Published
Pages
с 389 по 395
Published
13.04.2020
DIGITAL QUALITY SYSTEM AS A FACTOR FOR ENSURING THE COMPETITIVENESS OF ENTERPRISES
Authors
Demidenko Igor, Demidenko Alexander, Demidenko Aleksandr Aleksandrovich
Status
Published
Pages
с 396 по 400
Published
13.04.2020
OPPORTUNITIES FOR INDUSTRIAL DEVELOPMENT IN RUSSIA
Authors
Demidenko Alexander, Kramar' Anastasiya
Status
Published
Pages
с 400 по 404
Published
13.04.2020
WAYS TO INTENSIFY THE WORK OF UNIVERSITIES IN THE DIGITAL ECONOMY
Authors
Pimonov Andrey
Status
Published
Pages
с 405 по 409
Published
13.04.2020
IDENTIFICATION OF CRITERIA FOR IMPROVING THE COMPANY'S QMS PROCESSES BASED ON FUNCTIONAL AND COST ANALYSIS
Authors
Simkin Al'bert, Mozhaeva Tatyana, Proskurin Aleksandr
Status
Published
Pages
с 410 по 414
Published
13.04.2020
PROBABILISTIC MATHEMATICAL MODEL FOR QUANTIFYING THE QUALITY OF LARGE ELECTRIC MACHINES IN THE CONTEXT OF KNOWLEDGE MANAGEMENT
Authors
Fedorova Tat'yana
Status
Published
Pages
с 415 по 419
Published
13.04.2020
ASSESSMENT OF THE STABILITY OF CORRELATED QUALITY CHARACTERISTICS UNDER TECHNICAL CONTROL
Authors
Borbac' Nikolay, Shkolina Tat'yana
Status
Published
Pages
с 420 по 424
Published
13.04.2020
Date of formation
12.02.2020
Published
13.04.2020
Date of issue testifies to the registration of the newspaper
14.02.2020
Copyright sheets
25
Quantity of pages
425

Abstract (English)

It includes materials that reflect scientific and practical results in the field of ensuring and improving the quality of machines at the stages of the life cycle, as well as issues of technological support and improving the competitiveness of engineering products and aerospace equipment. It is intended for engineering and technical workers of industrial enterprises, scientists, doctoral students, postgraduates, and undergraduates

Keywords (English)

engineering technology, aerospace engineering, product quality, design, manufacturing, processing, diagnostics

Classifiers

Code 01.02.2006
Name Динамика, прочность машин, приборов и аппаратуры
Code 05.02.2000
Name Машиностроение и машиноведение
Code 05.02.2004
Name Трение и износ в машинах
Code 62
Name Инженерное дело. Техника в целом. Транспорт
Code 65
Name Управление предприятиями. Организация производства, торговли и транспорта
Code 55.01
Name Общие вопросы машиностроения
Submit manuscript
© 2024 БГТУ
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?