COMPUTERIZATION OF METROLOGICAL ASSURANCE OF GEOMETRIC PARAMETERS OF SURFACE QUALITY OF MACHINE PARTS

Fedorov Vladimir; Pyrikov Igor; Nagorkin Maksim; Toporkov Mihail; Tret'yakov Viktor Vladimirovich

doi:doi:

COMPUTERIZATION OF METROLOGICAL ASSURANCE OF GEOMETRIC PARAMETERS OF SURFACE QUALITY OF MACHINE PARTS

Submit manuscript

To cite

COMPUTERIZATION OF METROLOGICAL ASSURANCE OF GEOMETRIC PARAMETERS OF SURFACE QUALITY OF MACHINE PARTS

Section: USE OF AUTOMATED CONTROL SYSTEMS, CONTROL AND DIAGNOSTICS FOR TECHNOLOGICAL SUPPORT AND IMPROVEMENT OF THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS

Proceedings: ENSURING AND IMPROVING THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS

UDK 62 Инженерное дело. Техника в целом. Транспорт GRNTI 55.13 Технология машиностроения

Fedorov Vladimir ¹

Pyrikov Igor ²

Nagorkin Maksim ³

Toporkov Mihail ⁴

Tret'yakov Viktor Vladimirovich ⁵

Author and publication information

Authors:

1. Bryansk State Technical University (Department of Mechanical Engineering Technology, Professor)
Bryansk, Bryansk, Russian Federation

2. Bryansk State Technical University (kafedra "Tehnologiya mashinostroeniya", assistent Prof.)
Bryansk, Bryansk, Russian Federation

3. Bryansk State Technical University (Department of Technosphere Safety, Head of the Department, Professor)
Bryansk, Bryansk, Russian Federation

4. Bryanskiy gosudarstvennyy tehnicheskiy universitet (kafedra Tehnologiya mashinostroeniya, docent)
Bryansk, Russian Federation

5. Bryansk State Technical University

Type:

Сonference article

Published:

13.04.2020

Subject area:

UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 55.13 Технология машиностроения

Language:

Russian

Keywords:

roughness, undulation, Profiler, interface, computer, process system

Abstract and keywords

Abstract (English):
The questions of computerization of metrological support of geometrical parameters of quality of surfaces of machine parts on the basis of hardware and software interfaces of communication of elements of profilometers-profilometers with the personal computer are stated.

Keywords:
roughness, undulation, Profiler, interface, computer, process system

References

1. Tehnologicheskoe obespechenie i povyshenie ekspluatacionnyh svoystv detaley i ih soedineniy / A.G. Suslov, V.P. Fedorov, O.A. Gorlenko [i dr.]; pod obsch. red. A.G. Suslova. - M.: Mashinostroenie, 2006. - 447 s.

2. Suslov, A.G. Kompleksnyy podhod k eksperimental'nym issledovaniyam tehnologicheskih sistem metalloobrabotki po obespecheniyu parametrov kachestva i ekspluatacionnyh svoystv poverhnostey detaley mashin / A.G. Suslov, V.P. Fedorov, M.N. Nagorkin, I.L. Pyrikov // Naukoemkie tehnologii v mashinostroenii. - 2018. - № 10. - S. 3-13.

3. Fedorov, V.P. Avtomatizaciya diagnostiki tehnologicheskih sistem po parametram kachestva poverhnostey obrabatyvaemyh detaley / V.P. Fedorov, M.N. Nagorkin, I.L. Pyrikov, A.G. Ivahnenko, G.A. Fedyaeva, L.A. Potapov // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta - Bryansk: BGTU, № 1(33), 2012. - S. 85-94.

4. Fedorov, V.P. Apparatno-programmnye interfeysy avtomatizirovannyh sistem diagnostiki tehnologicheskih processov mehanicheskoy obrabotki poverhnostey detaley mashin / V.P. Fedorov, M.N. Nagorkin, I.L. Pyrikov, V.V. Tret'yakov // Mashinostroenie i tehnosfera XXI veka. Sbornik trudov XXIII mezhdunarodnoy nauchno-tehnicheskoy konferencii v g. Sevastopole 12-18 sent. 2016 g. T. 2. - Doneck: MSM, 2016. - S. 145-148.

Submit manuscript

To cite

Citations:

Confirmation

Регистрация