INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING

Kirichek Andrey; Barinov Sergey; Yashin Aleksandr

doi:doi:

INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING

Submit manuscript

To cite

INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING

Section: ENSURING AND IMPROVING THE QUALITY OF MACHINE-BUILDING AND AEROSPACE PRODUCTS DURING MANUFACTURING

Proceedings: ENSURING AND IMPROVING THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS

VAC 05.02.2000 Машиностроение и машиноведение UDK 62 Инженерное дело. Техника в целом. Транспорт UDK 65 Управление предприятиями. Организация производства, торговли и транспорта GRNTI 55.01 Общие вопросы машиностроения

Kirichek Andrey ¹

Barinov Sergey ²

Yashin Aleksandr ³

Author and publication information

Authors:

1. Bryansk State Technical University (Professor, Pro-rector for Promising Development)
employee
Bryansk, Bryansk, Russian Federation

2. Murom Institute (Branch) of Stoletovs State University of Vladimir (Dep. “Engineering Technique”, Associate Professor)
employee
Murom, Vladimir, Russian Federation

3. Murom Institute (Branch) of Stoletovs State University of Vladimir (Dep. “Engineering Technique”, Senior lecturer)
employee
Murom, Vladimir, Russian Federation

Type:

Сonference article

Published:

13.04.2020

Subject area:

VAC 05.02.2000 Машиностроение и машиноведение
UDK 62 Инженерное дело. Техника в целом. Транспорт
UDK 65 Управление предприятиями. Организация производства, торговли и транспорта
GRNTI 55.01 Общие вопросы машиностроения

Language:

Russian

Keywords:

impulse, shock system, modeling, material, hardening

Abstract and keywords

Abstract (English):
The article presents data on the influence of the geometric dimensions of the striker on the efficiency of the transmitted energy of shock pulses during wave deformation hardening. As a result of modeling, it was found that increasing the ratio of the striker length to its diameter from 0.1 to 10 allows transferring 15.6 times more energy of the shock pulse to the deformation center.

Keywords:
impulse, shock system, modeling, material, hardening

References

1. Kirichek A.V., Solov'ev D.L., Lazutkin A.G. Tehnologiya i oborudovanie statiko-impul'snoy obrabotki poverhnostnym plasticheskim deformirovaniem. M.: Mashinostroenie. - 2004. - 288 s.

2. Kirichek A.V., Barinov S.V. Vliyanie parametrov geterogennoy struktury na soprotivlenie kontaktnomu vykrashivaniyu // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta. - 2015. - № 4 (48). - S.54-58.

3. Kirichek A.V., Barinov S.V. Vliyanie obrabatyvaemoy sredy na effektivnost' peredachi energii udarnogo impul'sa pri volnovom deformacionnom uprochnenii // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta. - 2019. - № 11. - S.13-18.

4. Aleksandrov E.V., Sokolinskiy V.B. Prikladnaya teoriya i raschety udarnyh sistem. M.: Nauka. - 1969. - 201 s.

5. Alimov O.D., Manzhosov V.K., Erem'yanc V.E., Martynenko L.M. Raschet udarnyh sistem s netorcevym soudareniem elementov. Frunze: Ilim. - 1979. - 109 s.

6. Kirichek A.V., Barinov S.V., Yashin A.V. Issledovanie vliyaniya geometricheskih razmerov boyka na effektivnost' peredachi energii udarnyh impul'sov, pri volnovom deformacionnom uprochnenii // Innovacii v mashinostroenii: sbornik trudov X Mezhdunarodnoy nauchno-prakticheskoy konferencii / pod. red. V.Yu. Blyumenshteyna. - Kemerovo: KuzGTU, 2019 - 860 s.

Submit manuscript

To cite

Citations:

Confirmation

Регистрация