Abstract and keywords
Abstract (English):
The issues of evaluation of experimental data on the vibration of the technological system in the manufacture of mechanical engineering and aerospace equipment using the parameters of vibration signals in the frequency space are considered

Keywords:
cutting tool, wear, vibration, signal spectrum, estimation, frequency space
References

1. Bondar', N.Yu. Sistema kontrolya rabotosposobnosti frez na stankah s ChPU [Elektronnyy resurs] / N.Yu. Bondar', I.V. Maksimchuk // Sovremennye nauchnye issledovaniya i innovacii. – 2014. – № 6. – Ch. 1. – Rezhim dostupa: http://web.snauka.ru/issues/2014/06/34050, svobodnyy.

2. Salonitis, K. Reliability assessment of cutting tool life based on surrogate approximation methods / K. Salonitis, A. Kolios // International Journal of Advanced Manufacturing Technology. – 2014. – Vol. 71(5-8). – P. 1197-1208.

3. The adaptability of a tool wear monitoring system under changing cutting conditions / R.G. Silva [et al.] // Mechanical Systems and Signal Processing. – 2000. – Vol. 14. – P. 287-298.

4. Il'in, A.N. Razrabotka sistemy operativnoy diagnostiki rezhuschego instrumenta po elektricheskim parametram processa rezaniya: dis. … kand. tehn. nauk : 05.13.07 / Il'in Aleksandr Nikolaevich. – Ufa, 2000. – 191 s.

5. Ancev, A.V. Prognozirovanie perioda stoykosti rezhuschego instrumenta na osnove kontrolya vibracii v processe frezerovaniya / A.V. Ancev, H.Ch. Dang // Izvestiya Tul'skogo gosudarstvennogo universiteta. Tehnicheskie nauki. – 2018. – № 7. – C. 3 – 11.

6. Ancev, A.V. Kontrol' urovnya iznosa rezhuschego instrumenta po urovnyu vibracii pri tokarnoy obrabotke / A.V. Ancev, E.S. Yanov // Vestnik Tul'skogo gosudarstvennogo universiteta. Avtomatizaciya: problemy, idei, resheniya: sbornik nauchnyh trudov nacional'noy zaochnoy nauchno-tehnicheskoy konferencii s mezhdunarodnym uchastiem «APIR-23», 8-9 noyabrya 2018 goda / pod red. V.V. Preysa. – Tula: Izd-vo TulGU, – 2018. – S. 155-159.

7. Ancev A.V., Dang Ch.H., Yanov E.S., Polev M.V. Eksperimental'naya ustanovka kontrolya vibracii pri obrabotke na stankah s ChPU // Vestnik Voronezhskogo gosudarstvennogo tehnicheskogo universiteta. 2019. T. 15. № 2. S. 151-158.

8. Nussbaumer, G. Bystroe preobrazovanie Fur'e i algoritmy vychisleniya svertok / G. Nussbaumer. – M.: Radio i svyaz', 1985. – 248 s.