SELECTING END MILLS FOR PROCESSING DIRECTIONALLY-HARDENED MATERIALS
Authors:
1.
Bryansk State Technical University
(Professor, Pro-rector for Promising Development)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
2.
Komsomolsk-upon Amur State University
(department “Mechanical Engineering”, Professor)
employee
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
employee
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
3.
Bryansk State Technical University
(Director of the Educational and Scientific Institute of Transport)
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
4.
Far Eastern Federal University
5.
Bryansk State Technical University
(Department of Metal Cutting Machines and Tools, Senior Lecturer)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
Type:
Сonference article
Published:
13.04.2020
Subject area:
VAC 05.02.2000 Машиностроение и машиноведение
UDK 62 Инженерное дело. Техника в целом. Транспорт
UDK 65 Управление предприятиями. Организация производства, торговли и транспорта
GRNTI 55.01 Общие вопросы машиностроения
UDK 62 Инженерное дело. Техника в целом. Транспорт
UDK 65 Управление предприятиями. Организация производства, торговли и транспорта
GRNTI 55.01 Общие вопросы машиностроения
Language:
Russian
Keywords:
surfacing, static-pulse processing, wear, end mills, speed, feed, acoustic emission, signal
Abstract (English):
A comparative study of the wear resistance of hard-alloy end mills in the processing of surfaced and hardened (hardened) by the wave of deformation in the process of static-pulse processing of materials was performed.
A comparative study of the wear resistance of hard-alloy end mills in the processing of surfaced and hardened (hardened) by the wave of deformation in the process of static-pulse processing of materials was performed.
Keywords:
surfacing, static-pulse processing, wear, end mills, speed, feed, acoustic emission, signal
surfacing, static-pulse processing, wear, end mills, speed, feed, acoustic emission, signal
1. Kirichek A.V., Lazutkin A.G., Solov'ev D.L. Statiko-impul'snaya obrabotka i osnastka dlya ee realizacii //STIN. 1999. №6. S. 20-24.
2. Kirichek A.V., Solov'ev D.L. Vliyanie predvaritel'nogo staticheskogo nagruzheniya na mikrotverdost' // Tochnost' tehnologicheskih i transportnyh sistem: Materialy mezhdunar. nauchn.- tehn. konf. Penza: 1998. Ch.2. S.108-111.
3. Uprochnenie tyazhelonagruzhennyh detaley metodom statiko-impul'snogo PPD / D.L. Solov'ev i dr. // STIN. 2002. № 5 S.13-15.
4. Mokrickiy B.Ya. Akusticheskaya emissiya kak sredstvo ocenki i prognozirovaniya svoystv instrumental'nyh materialov// Vestnik mashinostroeniya. №10, 2010, s.76-78.
5. GOST R ISO 12716-2009 Kontrol' nerazrushayuschiy.
