METHOD FOR DETERMINING THE PARAMETERS OF THE SURFACE LAYER OF PARTS AND THE DISTRIBUTION OF DIMENSIONAL TOLERANCES
Authors:
1.
Kuzbuss State Technical University named after T.F. Gorbachev
2.
Kuzbuss State Technical University named after T.F. Gorbachev
Type:
Сonference article
Published:
13.04.2020
Subject area:
05.02.2000
05.02.2004
62
65
55.01
05.02.2004
62
65
55.01
Language:
Russian
Keywords:
surface layer, wear resistance, tolerance, wear rate, hardness, roughness, friction
Abstract (English):
The method of assigning surface layer parameters that ensure the minimum wear rate of the mated surfaces of parts is given. A method for calculating the tolerances for manufacturing and wear of parts working under friction conditions is proposed.
The method of assigning surface layer parameters that ensure the minimum wear rate of the mated surfaces of parts is given. A method for calculating the tolerances for manufacturing and wear of parts working under friction conditions is proposed.
Keywords:
surface layer, wear resistance, tolerance, wear rate, hardness, roughness, friction
surface layer, wear resistance, tolerance, wear rate, hardness, roughness, friction
1. Pronikov, A.S. Nadezhnost' mashin. - M.: Mashinostroenie, 1978. - 592 s.
2. Kragel'skiy, I.V. Osnovy raschetov na trenie i iznos. / I.V. Kragel'skiy, M.N. Dobychin, V.S. Kombalov. M.: Mashinostroenie, 1977. - 526 s.
3. Bouden F. Trenie i smazka tverdyh tel / F. Bouden, D. Teylor / pod red. I.V. Kragel'skogo. - M.: Mashinostroenie, 1968. - 543 s.
