Journals Conference proceedings News
Authors
Bulletin of BSTU Transport engineering Science intensive technologies in mechanical engineering Automation and modeling in design and management Ergodesign
Rubrics
Submit manuscript

Section's articles " Ensuring and improving the quality of machine-building and aerospace products during manufacturing "

IMPROVING THE QUALITY OF FINISHING ABRASIVE TREATMENT OF SILICON CARBIDE PLATES
INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING
INFLUENCE OF INHERITED DEFORMATION PROPERTIES ON THE MICROSTRUCTURE AND DESTRUCTION OF THE METAL SURFACE LAYER
ANALYSIS OF THE HARDENED SURFACE LAYER AFTER PROCESSING OF COMPLEX PROFILE AND TRADING INSTRUMENTS
HARDENING OF THE SURFACE LAYER OF RODS HYDRAULIC CYLINDERS FOR MINING EQUIPMENT ELECTROSPARK ALLOYING
INFLUENCE OF A STATIONARY PROCESS OF SURFACE PLASTIC DEFORMATION ON THE FATIGUE LIMIT
REQUIREMENTS FOR FEEDING AND CLEANING SYSTEMS ELECTROLYTES TO ENSURE THE QUALITY OF PARTS FOR ELECTROCHEMICAL AND COMBINED PROCESSING
COMPARISON OF CONTACT STRESSES BETWEEN THE SURFACES OF THE DEFORMING ROLLER, THE CYLINDRICAL SLEEVE AND THE SUPPORT ROLLER WHEN PROCESSING PARTS ROLLING AND UNROLLING
STUDY OF THE AXIAL CUTTING FORCE WHEN CUTTING INTERNAL SCREW GROOVES BASED ON COMPUTER SIMULATION
METHOD FOR CALCULATING THE GEOMETRIC PARAMETERS OF A RADIAL FEED MILL FOR AXIAL MILLING OF RC PROFILE SHAFTS
IMPROVING THE SERVICE LIFE OF CARBIDE INSERTS TURNING TOOLS DURING RESTORATION
APPLICATION OF COMBINED ELECTRODE-BRUSH PROCESSING IN MECHANICAL ENGINEERING
TECHNOLOGICAL SUPPORT FOR PRECISION MACHINING OF ULTRA-LONG SHAFTS ON A LATHE
THE EFFECT OF THE FEED RATE ON THE CUTTING FORCE AND CHIP SHRINKAGE WHEN GRINDING A PART OF ROCKET TECHNOLOGY MADE OF TITANIUM ALLOY VT-6
TECHNOLOGICAL ASSURANCE OF THE QUALITY AND SERVICE LIFE OF HEAVILY LOADED PARTS WHEN USING POLYCRYSTALLINE SV DIAMONDS FOR FINISHING OPERATIONS
TECHNOLOGICAL QUALITY ASSURANCE OF EXTERNAL THREADS ON PARTS MADE OF "SIGRABOND" MATERIAL»
INVESTIGATION OF OUTPUT PARAMETERS OF HIGH-PERFORMANCE MILLING OF TITANIUM ALLOYS VT20 AND VT22
ENSURING AND IMPROVING THE QUALITY OF MECHANICAL ENGINEERING AND AEROSPACE PRODUCTS IN THE MANUFACTURE OF TOOTHED PROFILES USING WAVE DEFORMATION HARDENING
PROVIDING NON-BURN COMBINED GRINDING OF MACHINE PARTS SURFACES
COMBINED PROCESSING OF TRANSITION SECTIONS OF METAL-CERAMIC HEAT-PROTECTIVE COATING CS LRD
IMPROVING THE QUALITY OF FINISHING ABRASIVE TREATMENT OF SILICON CARBIDE PLATES
IMPROVING THE QUALITY OF FINISHING ABRASIVE TREATMENT OF SILICON CARBIDE PLATES
Authors
Alehin Sergey
DOI
https://doi.org/
Status
Published
INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING
INFLUENCE OF THE GEOMETRIC DIMENSIONS OF THE STRIKER ON THE EFFICIENCY OF THE TRANSMITTED ENERGY OF SHOCK PULSES, DURING WAVE DEFORMATION HARDENING
Authors
Kirichek Andrey , Barinov Sergey , Yashin Aleksandr
DOI
https://doi.org/
Status
Published
INFLUENCE OF INHERITED DEFORMATION PROPERTIES ON THE MICROSTRUCTURE AND DESTRUCTION OF THE METAL SURFACE LAYER
INFLUENCE OF INHERITED DEFORMATION PROPERTIES ON THE MICROSTRUCTURE AND DESTRUCTION OF THE METAL SURFACE LAYER
Authors
Blyumenstein Valeriy , Krechetov Andrey
DOI
https://doi.org/
Status
Published
ANALYSIS OF THE HARDENED SURFACE LAYER AFTER PROCESSING OF COMPLEX PROFILE AND TRADING INSTRUMENTS
ANALYSIS OF THE HARDENED SURFACE LAYER AFTER PROCESSING OF COMPLEX PROFILE AND TRADING INSTRUMENTS
Authors
Mitrofanova Kristina
DOI
https://doi.org/
Status
Published
HARDENING OF THE SURFACE LAYER OF RODS HYDRAULIC CYLINDERS FOR MINING EQUIPMENT ELECTROSPARK ALLOYING
HARDENING OF THE SURFACE LAYER OF RODS HYDRAULIC CYLINDERS FOR MINING EQUIPMENT ELECTROSPARK ALLOYING
Authors
Korotin Vladimir
DOI
https://doi.org/
Status
Published
INFLUENCE OF A STATIONARY PROCESS OF SURFACE PLASTIC DEFORMATION ON THE FATIGUE LIMIT
INFLUENCE OF A STATIONARY PROCESS OF SURFACE PLASTIC DEFORMATION ON THE FATIGUE LIMIT
Authors
Uchaykin Sergey
DOI
https://doi.org/
Status
Published
REQUIREMENTS FOR FEEDING AND CLEANING SYSTEMS ELECTROLYTES TO ENSURE THE QUALITY OF PARTS FOR ELECTROCHEMICAL AND COMBINED PROCESSING
REQUIREMENTS FOR FEEDING AND CLEANING SYSTEMS ELECTROLYTES TO ENSURE THE QUALITY OF PARTS FOR ELECTROCHEMICAL AND COMBINED PROCESSING
Authors
Boldyrev Alexander , Boldyrev Aleksandr
DOI
https://doi.org/
Status
Published
COMPARISON OF CONTACT STRESSES BETWEEN THE SURFACES OF THE DEFORMING ROLLER, THE CYLINDRICAL SLEEVE AND THE SUPPORT ROLLER WHEN PROCESSING PARTS ROLLING AND UNROLLING
COMPARISON OF CONTACT STRESSES BETWEEN THE SURFACES OF THE DEFORMING ROLLER, THE CYLINDRICAL SLEEVE AND THE SUPPORT ROLLER WHEN PROCESSING PARTS ROLLING AND UNROLLING
Authors
Oteny Ya. , Virt Andrey
DOI
https://doi.org/
Status
Published
STUDY OF THE AXIAL CUTTING FORCE WHEN CUTTING INTERNAL SCREW GROOVES BASED ON COMPUTER SIMULATION
STUDY OF THE AXIAL CUTTING FORCE WHEN CUTTING INTERNAL SCREW GROOVES BASED ON COMPUTER SIMULATION
Authors
Kuc Vadim , Gridin Dmitriy
DOI
https://doi.org/
Status
Published
METHOD FOR CALCULATING THE GEOMETRIC PARAMETERS OF A RADIAL FEED MILL FOR AXIAL MILLING OF RC PROFILE SHAFTS
METHOD FOR CALCULATING THE GEOMETRIC PARAMETERS OF A RADIAL FEED MILL FOR AXIAL MILLING OF RC PROFILE SHAFTS
Authors
Kuc Vadim , Ponomarev Vasiliy Vladimirovich
DOI
https://doi.org/
Status
Published
IMPROVING THE SERVICE LIFE OF CARBIDE INSERTS TURNING TOOLS DURING RESTORATION
IMPROVING THE SERVICE LIFE OF CARBIDE INSERTS TURNING TOOLS DURING RESTORATION
Authors
Zakharov Leonid , Badakin Pavel Pavlovich
DOI
https://doi.org/
Status
Published
APPLICATION OF COMBINED ELECTRODE-BRUSH PROCESSING IN MECHANICAL ENGINEERING
APPLICATION OF COMBINED ELECTRODE-BRUSH PROCESSING IN MECHANICAL ENGINEERING
Authors
Kotukov Evgeniy Vasil'evich , Kirillov Oleg , Smolentsev Evgeny
DOI
https://doi.org/
Status
Published
TECHNOLOGICAL SUPPORT FOR PRECISION MACHINING OF ULTRA-LONG SHAFTS ON A LATHE
TECHNOLOGICAL SUPPORT FOR PRECISION MACHINING OF ULTRA-LONG SHAFTS ON A LATHE
Authors
Lebedev Valeriy , Oteny Ya. , Kazak Vyacheslav Fedorovich , Al' Obaydi Luai Mohamed Radzhab
DOI
https://doi.org/
Status
Published
THE EFFECT OF THE FEED RATE ON THE CUTTING FORCE AND CHIP SHRINKAGE WHEN GRINDING A PART OF ROCKET TECHNOLOGY MADE OF TITANIUM ALLOY VT-6
THE EFFECT OF THE FEED RATE ON THE CUTTING FORCE AND CHIP SHRINKAGE WHEN GRINDING A PART OF ROCKET TECHNOLOGY MADE OF TITANIUM ALLOY VT-6
Authors
Lamaeva Tat'yana Viktorovna , Kugul'tinov Sergey Danilovich
DOI
https://doi.org/
Status
Published
TECHNOLOGICAL ASSURANCE OF THE QUALITY AND SERVICE LIFE OF HEAVILY LOADED PARTS WHEN USING POLYCRYSTALLINE SV DIAMONDS FOR FINISHING OPERATIONS
TECHNOLOGICAL ASSURANCE OF THE QUALITY AND SERVICE LIFE OF HEAVILY LOADED PARTS WHEN USING POLYCRYSTALLINE SV DIAMONDS FOR FINISHING OPERATIONS
Authors
Averchenkov Vladimir , Naduvaev Vladimir , Frolov Evgeniy
DOI
https://doi.org/
Status
Published
TECHNOLOGICAL QUALITY ASSURANCE OF EXTERNAL THREADS ON PARTS MADE OF
TECHNOLOGICAL QUALITY ASSURANCE OF EXTERNAL THREADS ON PARTS MADE OF "SIGRABOND" MATERIAL»
Authors
Prokofiev Alexander , Bulaev Aleksandr Valentinovich , Zaycev Maksim Andreevich
DOI
https://doi.org/
Status
Published
INVESTIGATION OF OUTPUT PARAMETERS OF HIGH-PERFORMANCE MILLING OF TITANIUM ALLOYS VT20 AND VT22
INVESTIGATION OF OUTPUT PARAMETERS OF HIGH-PERFORMANCE MILLING OF TITANIUM ALLOYS VT20 AND VT22
Authors
Serebrennikova Anzhela , Savilov Andrey
DOI
https://doi.org/
Status
Published
ENSURING AND IMPROVING THE QUALITY OF MECHANICAL ENGINEERING AND AEROSPACE PRODUCTS IN THE MANUFACTURE OF TOOTHED PROFILES USING WAVE DEFORMATION HARDENING
ENSURING AND IMPROVING THE QUALITY OF MECHANICAL ENGINEERING AND AEROSPACE PRODUCTS IN THE MANUFACTURE OF TOOTHED PROFILES USING WAVE DEFORMATION HARDENING
Authors
Kirichek Andrey , Soloviyov Dmitry , Fedonina Svetlana , Fedukov Aleksandr
DOI
https://doi.org/
Status
Published
PROVIDING NON-BURN COMBINED GRINDING OF MACHINE PARTS SURFACES
PROVIDING NON-BURN COMBINED GRINDING OF MACHINE PARTS SURFACES
Authors
Shorohova Alla Aleksandrovna
DOI
https://doi.org/
Status
Published
COMBINED PROCESSING OF TRANSITION SECTIONS OF METAL-CERAMIC HEAT-PROTECTIVE COATING CS LRD
COMBINED PROCESSING OF TRANSITION SECTIONS OF METAL-CERAMIC HEAT-PROTECTIVE COATING CS LRD
Authors
Smolentsev Evgeny , Panichev Evgeniy Vladimirovich
DOI
https://doi.org/
Status
Published
© 2024 БГТУ
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?