Title (English)
AUTOMATION AND MODELING IN DESIGN AND MANAGEMENT
Language of publication
Russian, English
ISSN
2658-6436 (online)
Periodicity (English)
Periodicity of journal publication is every three months – up to 50 MB (online edition), up to 100 pages (printed edition).
Russian science citation index:
Yes 70093
Russian higher attestation Commission:
Yes
RULES
of submission, reviewing and publication of papers in Automation and Modelling in Design and Management
- Scientific and technical papers reflecting the results of research conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
- Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
- Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
- For publication in the journal papers are submitted electronically:
• the text of the paper signed by all authors (program database file (PDF));
• the text of the paper (DOC file; Word-2010);
• expert opinion on the possibility of publishing the paper content in open access (PDF);
• written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);
• a package of figures (TIFF, JPG files with 300 dpi at least).
After the paper is accepted for publication, the author/authors and the founder sign a License agreement.
The text of the paper should be carefully checked by the author.
- All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The members of the editorial board of the journal, who have knowledge and experience in the research area close to the topic of the author’s manuscript, are mainly involved as reviewers. Reviewers’ recommendations are the basis for the decision to publish the paper. Specialists working in the same institution as the author (authors) of the paper cannot be reviewers. The papers should be reviewed within 10 days of submission. If the review recommends paper revision or the paper is rejected, a copy of the review is sent to the author. Reviews of papers are kept in the editorial office for 5 years. When a corresponding request is received by the editorial office, copies of the reviews are sent to the Ministry of Science and Higher Education of the Russian Federation.
- Files submitted to the editorial office should be named after the first author (for example, Ivanov_I.I.).
- The paper for this journal should be 6-10 pages of A4 format (automatic hyphenation mode), including graphs, figures, tables and references.
8. The text of the paper should be 1- spaced and contain:
- in the upper left corner - UDC (letter height is 12 pt);
- on the right – initials, surname of the author (authors) separated by commas (letter height is 12 pt);
- title of the paper (uppercase letter height is 14 pt, bold, center alignment);
- abstract (4 to 6 lines; letter height is 10 pt; paragraph is 7 mm);
- keywords (6 – 8 words; letter height is 10 pt; paragraph is 7 mm);
- paper text (letter height is 12 pt; paragraph is 10 mm; margins: top, bottom, right, left - 20 mm);
- a reference list (letter height is 10 pt; the title is in uppercase letters);
- information on the authors: full name, academic degree, academic title, position, place of work, work address, work and/or home phone numbers, e-mail (letter height is 10 pt, the title is in uppercase letters, right alignment);
- abstract (letter height is 10 pt; paragraph is 7 mm).
Grant references should be given at the end of the paper (after Conclusion)
-
- The title of the paper should be informative, clearly reflect its content in a few words (mostly keywords). The abstract should make it possible to understand the main content of the article, its relevance and whether the reader should refer to its full text or not (one of the ways to write an abstract is to give a brief summary of the paper structure, including aims, objectives, methods and results). The summary is translated into English in the editorial office of the journal and is aimed to inform the foreign reader about the content of the paper. It should be informative (contain concrete information), original (does not duplicate the results obtained and published earlier), content-related (include the aim, methods, study progress, results, brief conclusions), structured (follow the description logic of the paper results) and concise (15 – 20 lines).
- The text of the paper should be well-structured. The introduction should contain information on the problem statement and possible application of the results in practice. The main part should have several sections (with headings) and contain a problem statement and the method proposed of its solution; the difference between the proposed statement of the problem from the already known; the advantage of the developed method in comparison with the existing (it should contain an example confirming the efficiency of the proposed solution). The paper should be completed with a meaningful discussion (conclusion) of the results.
- Formulas, letters (uppercase and lowercase, Latin and Greek alphabets), numbers, and other characters should be readable. All Latin letters are typed in italics, all Russian and Greek – upright. Formulas should be in 12 points Microsoft Equation 3.0 (Word-2010).
- Figures, graphs, charts, diagrams, tables and other graphics should be embedded to the text (after their mentioning) and should have legends (letter height is 10 pt, center alignment), and tables should have headings. Figures can be inserted in the text with runaround. Lettering in figures should be 10 points in Times, upright, starting with a capital letter. Formulas should be in a word processor compatible with MS Word 2010.
- Reference list should be in accordance with GOST R 7.0.100-2018 Bibliographic Record. Bibliographic Description and contain at least 10 references not earlier than 1970 and mainly presented in the international databases Scopus and/or Web of Science.
- All measurements should be in SI units.
- The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal.
16. If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.
17. Authors of papers are not paid a fee; papers are published free of charge.
18. The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.
The order of publication of articles
Guidelines for the direction, review and publication of articles
he editorial board of online edition Automation and Modelling in Design and Management adheres its activities to the Russian Federation law of 27.12.1991 № 2121-1 (updated of 03.07.2016) "On Mass Media", Regulation "On the journal Automation and Modelling in Design and Management", as well as the recommendations and standards of the Committee on Publication Ethics (COPE’s Best Practice Guidelines for Journal Editors,http://publicationethics.org/).
The editorial board of the journal does its best to comply with ethical standards adopted by the international scientific community, studies and takes into account the valuable experience of reliable international journals and publishers.
The Declaration of Publication Ethics contains the general principles and rules of relationship of participants involved in scientific publications (authors, reviewers, editors, publisher).
RESPONSIBILITIES OF THE EDITOR
Manuscript Assessment
The papers submitted to the journal should contain the scientific research results obtained by the authors, which have not been published anywhere before.
Reviewing papers submitted to the editorial office of the journal is aimed at ensuring the high quality of scientific papers published in the journal. All papers submitted to the editorial office for publication are reviewed.
The scientific paper undergoes peer-review twice: internal peer-review is carried out by the experts of the journal editorial board; external peer-review is done by experts who evaluate the level and clarity of presentation of the submitted material, whether it fits to the journal’s aim and scope, if your work is new and original as well as the conclusions are reliable. Reviewers' recommendations are the basis for the decision to publish the paper. The paper can be rejected both at the stages of internal and external peer-review.
The editorial board is fully responsible for the decision to publish the paper.
The editorial board of the journal makes its decision on publication, adhering to the editorial policy of the journal, taking into account current copyright laws, evaluating manuscripts according to their scientific content. In case of a positive decision of the reviewers and the editorial board, the paper is published in the next issue of the journal; authors hold copyright.
In case of rejection to publish, the author is given feedback with reasoned decision. The manuscript of the rejected paper is kept in the editorial office for at least 1 year. The paper review is sent to the author without the name of the reviewer but indicating the period during which the author can give his answer to the review. In case of giving sound explanation by the author, a second peer-review is carried out, and the decision to publish the paper is made again.
Confidentiality
The editor and editorial staff are not entitled to:
• to disclose information about a submitted manuscript to anyone other than the corresponding authors, reviewers, other editorial advisers and, if required, the publisher;
• to use unpublished materials of the submitted manuscript without the author’s permission.
Conflict of Interest
In case of any conflict of interest based on competitiveness, cooperation or other kinds of relations with one of the authors, companies or institutions associated with the submitted manuscripts, the editor sends the manuscript for reviewing to another member of the editorial board.
In case of complains on violation of publishing ethics concerning the submitted manuscript or published article, the editor together with the publisher should take adequate measures. Every report of unethical conduct should be considered, even if it comes years after the publication of the article. If the complaint is supported by the editorial board of the journal, appropriate corrections, denials or apologies should be published.
Review Storage and Provision
In accordance with the requirements of the Ministry of Education and Science of the Russian Federation, reviews of scientific papers are stored in the journal office for at least 5 years and can be provided to the Ministry of Education and Science of the Russian Federation upon request. If the paper is rejected, the authors are sent a review of the paper containing the reasons for the rejection to be published in the journal.
RESPONSIBILITIES OF PEER REVIEWERS
Contribution to Editorial Decisions
The reviewer evaluation contributes to making editorial decisions, as well as to improving the quality of the published article through the cooperation of the editor and the author.
When discussing the author's response to the review, the reviewer has the right to participate in the debate.
Rapid Decision Making
The reviewer should inform the editor and excuse himself from the review process if he feels unqualified to review the research presented in the paper, or he knows that he cannot meet the deadline.
Confidentiality
Any manuscript submitted for review should be treated as a confidential document. It is not acceptable to show it to other reviewers or discuss it with other experts without the permission of the editor-in-chief.
Standards of Objectivity
Reviewers should express their opinion clearly and reasonably: reviews of scientific works should be objective and do not contain personal criticism of the author.
Authentication of References
Reviewers should:
• analyze the sources used by the author of the paper, as well as the quality of bibliographic references of the citations used in the paper;
• identify published materials in a peer-reviewed manuscript that are cited but not bibliographically referred by the author;
• draw the editor's attention to significant or partial similarities with another paper which is familiar to the reviewer.
Information Disclosure and Conflict of Interest
Confidential data or ideas, which the reviewer learns during the review, should remain confidential and should not be used for personal gain or transferred to third parties. Reviewers should not be involved in the review and evaluation of manuscripts in which the reviewers are personally interested. Unpublished manuscript should not be used by the reviewer in his own research without the written permission of the author.
RESPONSIBILITIES OF AUTHORS
Reporting Standards
Authors should provide reliable results; objectively assess the significance of their research. The data of the research should be clearly presented in the paper, containing sufficient information so that others could replicate the experiments of the authors.
Before the paper is submitted to the editorial office for consideration, authors should obtain a written permission (expert report) of the organization to which they are affiliated for using the paper content.
Authors can give information about the funding of the research, which results it describes.
Data Access and Storage
Authors may be asked to provide initial data for editorial review. They should be ready to provide open access to such data if required within a reasonable period of time after publication.
Originality and Plagiarism
Authors should submit only original papers. When using text or graphic information of third parties or from their own but already published papers, references to relevant publications or written permission of the author are required. While reviewing the submitted papers, the editorial board screens them for unoriginal material.
Duplicate, redundant and competitive publications
Authors should indicate in the abstract that their paper is published for the first time. If the parts of the manuscript have been previously published in another paper, authors are encouraged to refer to the prior paper and show the significant difference between the new submission and the previous paper. Verbatim copying of own works and their paraphrasing are unacceptable; they can be used only as a basis for new conclusions.
Submitting an article to more than one journal is considered unethical and unacceptable.
Authentication of References
Authors should acknowledge the contribution of other persons who have influenced the study. Bibliographic references to the works used are considered necessary. Information received from third parties privately should not be used in the manuscript without their written permission.
Authorship
The list of authors is limited to those who have made a significant contribution to the research, the progress and results of which are described in the paper. All those who have contributed substantially should be listed as co-authors. The article may contain information about the participants of the research project. The corresponding author should ensure that the names of all co-authors and participants of the project are listed, and that all co-authors have given their permission to its publication, having read and approved the final manuscript before the submission.
Participants of the research, according to which the scientific paper was prepared, but not included in the number of co-authors of the paper, should be listed separately after "Conclusion".
Quality of Submitted Manuscript
The paper should be prepared in accordance with the requirements of the journal editorial board. The authors should contact the editorial board to deviate from these requirements. The information provided about the authors should be reliable. In case of any changes in the information, the authors should notify the editor.
Glaring Errors in Published Papers
If the author finds a glaring error or inaccuracy in his published article, he should immediately inform the editor or publisher of the journal and assist them in eliminating or correcting the error.
If the editor or publisher learns from a third party or from the publications of other authors that the paper published in the journal contains glaring errors, the author should immediately eliminate or correct them, or prove the correctness of the original article to the editorial board. If the fact that the published article has glaring errors is confirmed, the editorial office should publish information on it.
Paper Publication Process
1. Including a set of documents for publication from the author into the editorial database. The author can send these documents by e-mail or to the electronic edition of the journal (on the website).
2. Checking whether the materials submitted by the authors for paper publication are complete.
3. Screening manuscripts for unoriginal material using "Antiplagiat" system. The maximum permissible level of references cited is 20% of the whole text.
4. Peer reviewing of the paper by the members of the editorial board or by third-party expert referees.
5. Technical and editorial support of the paper reviewing.
6. Informing the authors about the need to revise the material of the paper (if there is a reviewer’s comment) or about the rejection to publish the paper in the journal (by e-mail).
7. Checking of the revisions made by the authors based on the reviewer’s comments (if any).
8. Scientific and literary editing of the electronic versions of papers, providing authors with the necessary assistance to improve the structure of the paper, the choice of terms, illustrations, adjusting the reference list in accordance with GOST R 7.0.100-2018 " Bibliographic Record. Bibliographic Description. General requirements and rules of making».
9. Checking in the original sources the correctness of cited quotations and digital data, using and spelling of names and technical terms, measurement units, compliance of characters with their designations, standards or adopted in the scientific literature norms.
10. Approval of the paper text after editing by e-mail.
11. Translation of the paper title, authors' names, abstract, keywords, information about the authors and references into English.
12. Preparation of the electronic version of the license agreement between the editorial board and the authors concerning the processing of authors’ personal data, the metadata of published paper to assign ID DOI (Digital Object Identifier) in order to provide Internet users with further opportunity to search, view and use the paper for informational, scientific and educational purposes (for papers advised by reviewers for publication).
13. Making a print license agreement between the editorial board and the authors and sending it by mail.
14. Correspondence with the authors of the paper (registration of the license agreement with the authors).
15. Registration of the paper authors and its metadata, sending it to CrossRef, and assignment of DOI to the scientific publication. Putting information on DOI into the print article.
16. Making up an electronic layout of the papers and the journal.
17. Make up proof of the journal layout before sending it in print.
18. Getting an approval of the editor-in-chief for the journal layout.
19. Circulating the journal and posting it on the website.
20. Posting the electronic version of thejournal in Russian State Library (https://www.rsl.ru/), Scientific e-library (https://elibrary.ru/defaultx.asp), Scientific Publishing Center INFRA-M (https://naukaru.ru/ru/nauka/), electronic edition of the journal (https://bstu.editorum.ru/ru/nauka/journal/78/view), and online scientific library CyberLeninka (https://cyberleninka.ru)
21. Posting the journal on the website of the Russian Book Chamber and the Russian State Library (oek.rsl.ru site). A mandatory electronic copy of the publication.
22. Distribution of the journal to subscribers, customers and mandatory print copies to the Russian Book Chamber.
List of retracted articles As of 01.01.2021 the articles of the publication were not retracted.
The subscription and the acquisition The magazine is distributed by subscription, which for 2022 can be issued on the website of the "United Catalog" Press of Russia" www.pressa-rf.ru.
You can buy the magazine from the publisher.
Contacts:
Morozova Anna Valentinovna
Head of the Office of BSTU Scientific Periodicals;
Phone : +7-919-202-70-07;
E-mail:niotiostu@gmail.com
Publication fee is not charged.
Sigov Alyeksandr
—
Chairman of Editorial Committee
MIREA – Russian Technological University (President)
Moskva, Moscow, Russian Federation
MIREA – Russian Technological University (President)
Moskva, Moscow, Russian Federation
Averchenkov Andrey
—
Chairman Assistant
Institute for Design-Technological Informatics RAS
doctor of technical sciences
docent
Moscow, Russian Federation
ORCID:0000-0003-0196-1332
Institute for Design-Technological Informatics RAS
doctor of technical sciences
docent
Moscow, Russian Federation
ORCID:0000-0003-0196-1332
Fedonin Oleg
—
Chairman Assistant
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X
Averchenkov Vladimir
—
Editor-in-chief
Bryansk State Technical University (kafedra «Komp'yuternye tehnologii i sistemy», Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (kafedra «Komp'yuternye tehnologii i sistemy», Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Bobyr Maksim
—
Editorial Committee
Yugo-Zapadnyy gosudarstvennyy universitet (kafedra "Vychislitel'noy tehniki", professor)
professor
Kursk, Kursk, Russian Federation
Yugo-Zapadnyy gosudarstvennyy universitet (kafedra "Vychislitel'noy tehniki", professor)
professor
Kursk, Kursk, Russian Federation
Bochkarev Petr
—
Editorial Committee
Yuri Gagarin State Technical University of Saratov (kafedra «Tehnicheskaya mehanika i detali mashin», professor)
doctor of technical sciences
Saratov, Saratov, Russian Federation
Yuri Gagarin State Technical University of Saratov (kafedra «Tehnicheskaya mehanika i detali mashin», professor)
doctor of technical sciences
Saratov, Saratov, Russian Federation
Dolgov Yuriy
—
Editorial Committee
Transnistrian State University named after T.G. Shevchenko (kafedra "Informacionnyh tehnologiy i avtomatizirovannogo upravleniya proizvodstvennymi processami", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tiraspol, Transnistria
Transnistrian State University named after T.G. Shevchenko (kafedra "Informacionnyh tehnologiy i avtomatizirovannogo upravleniya proizvodstvennymi processami", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tiraspol, Transnistria
Eremenko Vladimir
—
Editorial Committee
Turgenev Orel State University (kafedra «Informacionnaya bezopasnost'», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Orel, Russian Federation
Turgenev Orel State University (kafedra «Informacionnaya bezopasnost'», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Orel, Russian Federation
Ivaschuk Ol'ga
—
Editorial Committee
Belgorod State University (kafedra "Informacionnyh i robototehnicheskih sistem", zaveduyuschaya kafedroy)
doctor of technical sciences
professor
Belgorod, Belgorod, Russian Federation
Belgorod State University (kafedra "Informacionnyh i robototehnicheskih sistem", zaveduyuschaya kafedroy)
doctor of technical sciences
professor
Belgorod, Belgorod, Russian Federation
Inkov Yuriy
—
Editorial Committee
RUSSIAN UNIVERSITY OF TRANSPORT (kafedr «Elektropoezda i lokomotivy», professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
RUSSIAN UNIVERSITY OF TRANSPORT (kafedr «Elektropoezda i lokomotivy», professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Karpenko Anatoliy
—
Editorial Committee
Bauman Moscow State Technical University (kafedra "Sistemy avtomatizirovannogo proektirovaniya", zaveduyuschiy kafedroy)
doctor of physical and mathematical sciences
professor
Moscow, Moscow, Russian Federation
Bauman Moscow State Technical University (kafedra "Sistemy avtomatizirovannogo proektirovaniya", zaveduyuschiy kafedroy)
doctor of physical and mathematical sciences
professor
Moscow, Moscow, Russian Federation
Kvyatkovskaya Irina
—
Editorial Committee
Astrakhan State Technical University (Doctor of Technical Sciences, Professor; Head of the Department of Higher and Applied Mathematics)
doctor of technical sciences
professor
Astrahan', Astrakhan, Russian Federation
ORCID:0000-0001-7205-7231
Astrakhan State Technical University (Doctor of Technical Sciences, Professor; Head of the Department of Higher and Applied Mathematics)
doctor of technical sciences
professor
Astrahan', Astrakhan, Russian Federation
ORCID:0000-0001-7205-7231
Kravec Alla Grigor'evna
—
Editorial Committee
Volgograd State Technical University; Dubna State University (Doctor of Sciences in Technology, Professor; Professor of the Department of Computer Aided Design and Exploratory Design Systems; Volgograd State Technical University; Professor of the Department of System Analysis and Control)
doctor of technical sciences
professor
Volgograd, Volgograd, Russian Federation
Volgograd State Technical University; Dubna State University (Doctor of Sciences in Technology, Professor; Professor of the Department of Computer Aided Design and Exploratory Design Systems; Volgograd State Technical University; Professor of the Department of System Analysis and Control)
doctor of technical sciences
professor
Volgograd, Volgograd, Russian Federation
Kureychik Vladimir
—
Editorial Committee
Southern Federal University (Kafedra "Sistem avtomatizirovannogo proektirovaniya", Head of department)
doctor of technical sciences
professor
Taganrog, Rostov-on-Don, Russian Federation
Southern Federal University (Kafedra "Sistem avtomatizirovannogo proektirovaniya", Head of department)
doctor of technical sciences
professor
Taganrog, Rostov-on-Don, Russian Federation
Makarova Elena
—
Editorial Committee
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Meshcheryakov Viktor
—
Editorial Committee
Lipetsk State Technical University (kafedra «Elektroprivod», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Lipetsk, Lipetsk, Russian Federation
Lipetsk State Technical University (kafedra «Elektroprivod», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Lipetsk, Lipetsk, Russian Federation
Mikhalchenko Sergey
—
Editorial Committee
Tomsk State University of Control Systems and Radioelectronics (kafedra «Promyshlennaya elektronika», zaveduyuschiy kafedroy)
doctor of technical sciences
docent
Tomsk, Tomsk, Russian Federation
Tomsk State University of Control Systems and Radioelectronics (kafedra «Promyshlennaya elektronika», zaveduyuschiy kafedroy)
doctor of technical sciences
docent
Tomsk, Tomsk, Russian Federation
Nikitin Viktor
—
Editorial Committee
Emperor Alexander I St. Petersburg State Transport University (Department “Electrical and Thermal Power Engineering”, Professor)
doctor of technical sciences
docent
Russian Federation
Emperor Alexander I St. Petersburg State Transport University (Department “Electrical and Thermal Power Engineering”, Professor)
doctor of technical sciences
docent
Russian Federation
Noskov Sergey
—
Editorial Committee
Irkutsk State University of Railway Transport (Doctor of Technical Sciences, Professor; Professor of the Department of Information Systems and Information Security)
doctor of technical sciences
professor
Irkutsk, Irkutsk region, Russian Federation
Irkutsk State University of Railway Transport (Doctor of Technical Sciences, Professor; Professor of the Department of Information Systems and Information Security)
doctor of technical sciences
professor
Irkutsk, Irkutsk region, Russian Federation
Petreshin Dmitriy
—
Editorial Committee
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: SPIN-код: 1176-9458 ORCID:0000-0001-9472-2167
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: SPIN-код: 1176-9458 ORCID:0000-0001-9472-2167
Podvesovskiy Aleksandr
—
Editorial Committee
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Pyl'kin Aleksandr
—
Editorial Committee
Ryazanskiy gosudarstvennyy radiotehnicheskiy universitet (Kafedra "Vychislitel'noy i prikladnoy matematiki", professor)
doctor of technical sciences
professor
Ryazan, Orel, Russian Federation
Ryazanskiy gosudarstvennyy radiotehnicheskiy universitet (Kafedra "Vychislitel'noy i prikladnoy matematiki", professor)
doctor of technical sciences
professor
Ryazan, Orel, Russian Federation
Skrypnikov Aleksey
—
Editorial Committee
FGBOU VO «Voronezhskiy gosudarstvennyy universitet inzhenernyh tehnologiy" (Kafedra "Informacionnaya bezopasnost'", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation
FGBOU VO «Voronezhskiy gosudarstvennyy universitet inzhenernyh tehnologiy" (Kafedra "Informacionnaya bezopasnost'", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation
Sosnin Petr
—
Editorial Committee
Ulyanovsk State Technical University (kafedra «Vychislitel'naya tehnika», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Vladimir, Russian Federation
Ulyanovsk State Technical University (kafedra «Vychislitel'naya tehnika», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Vladimir, Russian Federation
Feofanov Aleksandr
—
Editorial Committee
Moscow State University of Technology «STANKIN» (department engineering graphics, prof)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Moscow State University of Technology «STANKIN» (department engineering graphics, prof)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Kheyfets Mikhail
—
Editorial Committee
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus
Chepchurov Mihail
—
Editorial Committee
Belgorod State Technological University named after V.G. Shukhov (Department of mechanical engineering technology, Professor of the Department)
doctor of technical sciences
docent
Belgorod, Belgorod, Russian Federation
Belgorod State Technological University named after V.G. Shukhov (Department of mechanical engineering technology, Professor of the Department)
doctor of technical sciences
docent
Belgorod, Belgorod, Russian Federation
Sheptunov Sergey
—
Editorial Committee
Institute of Design-Technological Informatics of the Russian Academy of Sciences (direktor)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Institute of Design-Technological Informatics of the Russian Academy of Sciences (direktor)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Yarushkina Nadezhda
—
Editorial Committee
Ulyanovsk State Technical University (Rektor)
Ul'yanovsk, Ulyanovsk, Russian Federation
Ulyanovsk State Technical University (Rektor)
Ul'yanovsk, Ulyanovsk, Russian Federation
Zaharova Alena
—
Deputy Editor-in-chief
Institute of Control Sciences named after V.A. Trapeznikov, Russian Academy of Sciences (Cyberphysical Systems Laboratory, Chief Researcher)
doctor of technical sciences
docent
Moskva, Moscow, Russian Federation
Institute of Control Sciences named after V.A. Trapeznikov, Russian Academy of Sciences (Cyberphysical Systems Laboratory, Chief Researcher)
doctor of technical sciences
docent
Moskva, Moscow, Russian Federation
Malakhanov Alexey
—
Deputy Editor-in-chief
Bryansk State Technical University
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Podvesovskiy Aleksandr
—
Deputy chief editor
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Pugachev Aleksandr
—
Deputy Editor-in-chief
Bryansk State Technical University (Department of Turbine Engineering, Electrical and Thermal Power Engineering, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923
Bryansk State Technical University (Department of Turbine Engineering, Electrical and Thermal Power Engineering, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923
MATHEMATICAL MODELING, NUMERICAL METHODS AND PROGRAM COMPLEXES
MANAGEMENT IN SOCIAL AND ECONOMIC SYSTEMS
AUTOMATION AND CONTROL OF TECHNOLOGICAL PROCESSES AND PRODUCTION, AUTOMATED DESIGN SYSTEMS
ELECTROTECHNICAL COMPLEXES AND SYSTEMS
MANAGEMENT IN ORGANIZATIONAL SYSTEMS
COMPUTER MODELING AND DESIGN AUTOMATION
MATHEMATICAL AND COMPUTER MODELING
ELECTRICAL COMPLEXES AND SYSTEMS
Publisher
Bryansk State Technical University
Founder
Bryansk State Technical University
The certificate of registration of the periodical
Эл № ФС77-73848
RULES
of submission, reviewing and publication of papers in Automation and Modelling in Design and Management
- Scientific and technical papers reflecting the results of research conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
- Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
- Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
- For publication in the journal papers are submitted electronically:
• the text of the paper signed by all authors (program database file (PDF));
• the text of the paper (DOC file; Word-2010);
• expert opinion on the possibility of publishing the paper content in open access (PDF);
• written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);
• a package of figures (TIFF, JPG files with 300 dpi at least).
After the paper is accepted for publication, the author/authors and the founder sign a License agreement.
The text of the paper should be carefully checked by the author.
- All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The members of the editorial board of the journal, who have knowledge and experience in the research area close to the topic of the author’s manuscript, are mainly involved as reviewers. Reviewers’ recommendations are the basis for the decision to publish the paper. Specialists working in the same institution as the author (authors) of the paper cannot be reviewers. The papers should be reviewed within 10 days of submission. If the review recommends paper revision or the paper is rejected, a copy of the review is sent to the author. Reviews of papers are kept in the editorial office for 5 years. When a corresponding request is received by the editorial office, copies of the reviews are sent to the Ministry of Science and Higher Education of the Russian Federation.
- Files submitted to the editorial office should be named after the first author (for example, Ivanov_I.I.).
- The paper for this journal should be 6-10 pages of A4 format (automatic hyphenation mode), including graphs, figures, tables and references.
8. The text of the paper should be 1- spaced and contain:
- in the upper left corner - UDC (letter height is 12 pt);
- on the right – initials, surname of the author (authors) separated by commas (letter height is 12 pt);
- title of the paper (uppercase letter height is 14 pt, bold, center alignment);
- abstract (4 to 6 lines; letter height is 10 pt; paragraph is 7 mm);
- keywords (6 – 8 words; letter height is 10 pt; paragraph is 7 mm);
- paper text (letter height is 12 pt; paragraph is 10 mm; margins: top, bottom, right, left - 20 mm);
- a reference list (letter height is 10 pt; the title is in uppercase letters);
- information on the authors: full name, academic degree, academic title, position, place of work, work address, work and/or home phone numbers, e-mail (letter height is 10 pt, the title is in uppercase letters, right alignment);
- abstract (letter height is 10 pt; paragraph is 7 mm).
Grant references should be given at the end of the paper (after Conclusion)
-
- The title of the paper should be informative, clearly reflect its content in a few words (mostly keywords). The abstract should make it possible to understand the main content of the article, its relevance and whether the reader should refer to its full text or not (one of the ways to write an abstract is to give a brief summary of the paper structure, including aims, objectives, methods and results). The summary is translated into English in the editorial office of the journal and is aimed to inform the foreign reader about the content of the paper. It should be informative (contain concrete information), original (does not duplicate the results obtained and published earlier), content-related (include the aim, methods, study progress, results, brief conclusions), structured (follow the description logic of the paper results) and concise (15 – 20 lines).
- The text of the paper should be well-structured. The introduction should contain information on the problem statement and possible application of the results in practice. The main part should have several sections (with headings) and contain a problem statement and the method proposed of its solution; the difference between the proposed statement of the problem from the already known; the advantage of the developed method in comparison with the existing (it should contain an example confirming the efficiency of the proposed solution). The paper should be completed with a meaningful discussion (conclusion) of the results.
- Formulas, letters (uppercase and lowercase, Latin and Greek alphabets), numbers, and other characters should be readable. All Latin letters are typed in italics, all Russian and Greek – upright. Formulas should be in 12 points Microsoft Equation 3.0 (Word-2010).
- Figures, graphs, charts, diagrams, tables and other graphics should be embedded to the text (after their mentioning) and should have legends (letter height is 10 pt, center alignment), and tables should have headings. Figures can be inserted in the text with runaround. Lettering in figures should be 10 points in Times, upright, starting with a capital letter. Formulas should be in a word processor compatible with MS Word 2010.
- Reference list should be in accordance with GOST R 7.0.100-2018 Bibliographic Record. Bibliographic Description and contain at least 10 references not earlier than 1970 and mainly presented in the international databases Scopus and/or Web of Science.
- All measurements should be in SI units.
- The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal.
16. If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.
17. Authors of papers are not paid a fee; papers are published free of charge.
18. The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.
The order of publication of articles
Guidelines for the direction, review and publication of articles
he editorial board of online edition Automation and Modelling in Design and Management adheres its activities to the Russian Federation law of 27.12.1991 № 2121-1 (updated of 03.07.2016) "On Mass Media", Regulation "On the journal Automation and Modelling in Design and Management", as well as the recommendations and standards of the Committee on Publication Ethics (COPE’s Best Practice Guidelines for Journal Editors,http://publicationethics.org/).
The editorial board of the journal does its best to comply with ethical standards adopted by the international scientific community, studies and takes into account the valuable experience of reliable international journals and publishers.
The Declaration of Publication Ethics contains the general principles and rules of relationship of participants involved in scientific publications (authors, reviewers, editors, publisher).
RESPONSIBILITIES OF THE EDITOR
Manuscript Assessment
The papers submitted to the journal should contain the scientific research results obtained by the authors, which have not been published anywhere before.
Reviewing papers submitted to the editorial office of the journal is aimed at ensuring the high quality of scientific papers published in the journal. All papers submitted to the editorial office for publication are reviewed.
The scientific paper undergoes peer-review twice: internal peer-review is carried out by the experts of the journal editorial board; external peer-review is done by experts who evaluate the level and clarity of presentation of the submitted material, whether it fits to the journal’s aim and scope, if your work is new and original as well as the conclusions are reliable. Reviewers' recommendations are the basis for the decision to publish the paper. The paper can be rejected both at the stages of internal and external peer-review.
The editorial board is fully responsible for the decision to publish the paper.
The editorial board of the journal makes its decision on publication, adhering to the editorial policy of the journal, taking into account current copyright laws, evaluating manuscripts according to their scientific content. In case of a positive decision of the reviewers and the editorial board, the paper is published in the next issue of the journal; authors hold copyright.
In case of rejection to publish, the author is given feedback with reasoned decision. The manuscript of the rejected paper is kept in the editorial office for at least 1 year. The paper review is sent to the author without the name of the reviewer but indicating the period during which the author can give his answer to the review. In case of giving sound explanation by the author, a second peer-review is carried out, and the decision to publish the paper is made again.
Confidentiality
The editor and editorial staff are not entitled to:
• to disclose information about a submitted manuscript to anyone other than the corresponding authors, reviewers, other editorial advisers and, if required, the publisher;
• to use unpublished materials of the submitted manuscript without the author’s permission.
Conflict of Interest
In case of any conflict of interest based on competitiveness, cooperation or other kinds of relations with one of the authors, companies or institutions associated with the submitted manuscripts, the editor sends the manuscript for reviewing to another member of the editorial board.
In case of complains on violation of publishing ethics concerning the submitted manuscript or published article, the editor together with the publisher should take adequate measures. Every report of unethical conduct should be considered, even if it comes years after the publication of the article. If the complaint is supported by the editorial board of the journal, appropriate corrections, denials or apologies should be published.
Review Storage and Provision
In accordance with the requirements of the Ministry of Education and Science of the Russian Federation, reviews of scientific papers are stored in the journal office for at least 5 years and can be provided to the Ministry of Education and Science of the Russian Federation upon request. If the paper is rejected, the authors are sent a review of the paper containing the reasons for the rejection to be published in the journal.
RESPONSIBILITIES OF PEER REVIEWERS
Contribution to Editorial Decisions
The reviewer evaluation contributes to making editorial decisions, as well as to improving the quality of the published article through the cooperation of the editor and the author.
When discussing the author's response to the review, the reviewer has the right to participate in the debate.
Rapid Decision Making
The reviewer should inform the editor and excuse himself from the review process if he feels unqualified to review the research presented in the paper, or he knows that he cannot meet the deadline.
Confidentiality
Any manuscript submitted for review should be treated as a confidential document. It is not acceptable to show it to other reviewers or discuss it with other experts without the permission of the editor-in-chief.
Standards of Objectivity
Reviewers should express their opinion clearly and reasonably: reviews of scientific works should be objective and do not contain personal criticism of the author.
Authentication of References
Reviewers should:
• analyze the sources used by the author of the paper, as well as the quality of bibliographic references of the citations used in the paper;
• identify published materials in a peer-reviewed manuscript that are cited but not bibliographically referred by the author;
• draw the editor's attention to significant or partial similarities with another paper which is familiar to the reviewer.
Information Disclosure and Conflict of Interest
Confidential data or ideas, which the reviewer learns during the review, should remain confidential and should not be used for personal gain or transferred to third parties. Reviewers should not be involved in the review and evaluation of manuscripts in which the reviewers are personally interested. Unpublished manuscript should not be used by the reviewer in his own research without the written permission of the author.
RESPONSIBILITIES OF AUTHORS
Reporting Standards
Authors should provide reliable results; objectively assess the significance of their research. The data of the research should be clearly presented in the paper, containing sufficient information so that others could replicate the experiments of the authors.
Before the paper is submitted to the editorial office for consideration, authors should obtain a written permission (expert report) of the organization to which they are affiliated for using the paper content.
Authors can give information about the funding of the research, which results it describes.
Data Access and Storage
Authors may be asked to provide initial data for editorial review. They should be ready to provide open access to such data if required within a reasonable period of time after publication.
Originality and Plagiarism
Authors should submit only original papers. When using text or graphic information of third parties or from their own but already published papers, references to relevant publications or written permission of the author are required. While reviewing the submitted papers, the editorial board screens them for unoriginal material.
Duplicate, redundant and competitive publications
Authors should indicate in the abstract that their paper is published for the first time. If the parts of the manuscript have been previously published in another paper, authors are encouraged to refer to the prior paper and show the significant difference between the new submission and the previous paper. Verbatim copying of own works and their paraphrasing are unacceptable; they can be used only as a basis for new conclusions.
Submitting an article to more than one journal is considered unethical and unacceptable.
Authentication of References
Authors should acknowledge the contribution of other persons who have influenced the study. Bibliographic references to the works used are considered necessary. Information received from third parties privately should not be used in the manuscript without their written permission.
Authorship
The list of authors is limited to those who have made a significant contribution to the research, the progress and results of which are described in the paper. All those who have contributed substantially should be listed as co-authors. The article may contain information about the participants of the research project. The corresponding author should ensure that the names of all co-authors and participants of the project are listed, and that all co-authors have given their permission to its publication, having read and approved the final manuscript before the submission.
Participants of the research, according to which the scientific paper was prepared, but not included in the number of co-authors of the paper, should be listed separately after "Conclusion".
Quality of Submitted Manuscript
The paper should be prepared in accordance with the requirements of the journal editorial board. The authors should contact the editorial board to deviate from these requirements. The information provided about the authors should be reliable. In case of any changes in the information, the authors should notify the editor.
Glaring Errors in Published Papers
If the author finds a glaring error or inaccuracy in his published article, he should immediately inform the editor or publisher of the journal and assist them in eliminating or correcting the error.
If the editor or publisher learns from a third party or from the publications of other authors that the paper published in the journal contains glaring errors, the author should immediately eliminate or correct them, or prove the correctness of the original article to the editorial board. If the fact that the published article has glaring errors is confirmed, the editorial office should publish information on it.
Paper Publication Process
1. Including a set of documents for publication from the author into the editorial database. The author can send these documents by e-mail or to the electronic edition of the journal (on the website).
2. Checking whether the materials submitted by the authors for paper publication are complete.
3. Screening manuscripts for unoriginal material using "Antiplagiat" system. The maximum permissible level of references cited is 20% of the whole text.
4. Peer reviewing of the paper by the members of the editorial board or by third-party expert referees.
5. Technical and editorial support of the paper reviewing.
6. Informing the authors about the need to revise the material of the paper (if there is a reviewer’s comment) or about the rejection to publish the paper in the journal (by e-mail).
7. Checking of the revisions made by the authors based on the reviewer’s comments (if any).
8. Scientific and literary editing of the electronic versions of papers, providing authors with the necessary assistance to improve the structure of the paper, the choice of terms, illustrations, adjusting the reference list in accordance with GOST R 7.0.100-2018 " Bibliographic Record. Bibliographic Description. General requirements and rules of making».
9. Checking in the original sources the correctness of cited quotations and digital data, using and spelling of names and technical terms, measurement units, compliance of characters with their designations, standards or adopted in the scientific literature norms.
10. Approval of the paper text after editing by e-mail.
11. Translation of the paper title, authors' names, abstract, keywords, information about the authors and references into English.
12. Preparation of the electronic version of the license agreement between the editorial board and the authors concerning the processing of authors’ personal data, the metadata of published paper to assign ID DOI (Digital Object Identifier) in order to provide Internet users with further opportunity to search, view and use the paper for informational, scientific and educational purposes (for papers advised by reviewers for publication).
13. Making a print license agreement between the editorial board and the authors and sending it by mail.
14. Correspondence with the authors of the paper (registration of the license agreement with the authors).
15. Registration of the paper authors and its metadata, sending it to CrossRef, and assignment of DOI to the scientific publication. Putting information on DOI into the print article.
16. Making up an electronic layout of the papers and the journal.
17. Make up proof of the journal layout before sending it in print.
18. Getting an approval of the editor-in-chief for the journal layout.
19. Circulating the journal and posting it on the website.
20. Posting the electronic version of thejournal in Russian State Library (https://www.rsl.ru/), Scientific e-library (https://elibrary.ru/defaultx.asp), Scientific Publishing Center INFRA-M (https://naukaru.ru/ru/nauka/), electronic edition of the journal (https://bstu.editorum.ru/ru/nauka/journal/78/view), and online scientific library CyberLeninka (https://cyberleninka.ru)
21. Posting the journal on the website of the Russian Book Chamber and the Russian State Library (oek.rsl.ru site). A mandatory electronic copy of the publication.
22. Distribution of the journal to subscribers, customers and mandatory print copies to the Russian Book Chamber.
JOURNAL ADVERTISING
|
№ |
Advertising space type |
Price (including VAT), rub./issue |
|
1 |
Cover, 2nd and 4th page (advert size 280×185 mm) |
10 000 |
|
2 |
Cover, 3rd page (advert size 280×185 mm) |
8 000 |
|
3 |
Black-and-white, inside the journal (advert size 165×240 mm) |
4 000 |
|
4 |
Black-and-white inside the journal (advert size 165×120 mm) |
3 000 |
|
5 |
Black-and-white, inside the journal (advert size 165×60 mm) |
2 000 |
|
6 |
Advert making |
5 000 Rubles/advert |
JOURNAL ADVERTISING ONLINE
|
№ |
Advertising space type |
Price (including VAT), rub./month |
|
1 |
Banner on all websites of 180×180 pixels on the right page page of the website. The banner is dynamic |
4 000 |
|
2 |
Banner on all websites of 160×160 pixels on the right page of the website. The banner is dynamic |
3 000 |
|
3 |
Banner interchange of 100×100 pixels with overlapping concern |
1 000 |
|
4 |
Advert making |
5 000 Rubles/Module |
The journal publishes only noncommercial advertising: information on scientific developments, the work of research firms and departments of industrial enterprises and universities, arrangement and holding scientific events, etc.
FINANCIAL POLICY
Automation and Modelling in Design and Management has an external funding model, i.e. the preparation and publication of the journal is carried out at the expense of the founder and sponsors, funds derived from advertising, subscription and customers (individuals and legal entities) who buy journal issues.
Paper publication in the journal is free of charge.
The money received from external financing sources is spent on the following types of work:
- editing and proofreading of incoming papers;
- translation of paper fragments;
- prepress (electronic editing and correction of formulas and figures, making quality drawings in graphics editors, making up of articles, layout of the journal and its cover, loading paper data in the information system and assignment of a DOI for each paper of the journal);
- consumables for journal circulating;
- payment for DOI registration of the journal and each article;
- inclusion in the catalogue "Rospechat»;
- payment for the electronic edition and website of the journal;
- payment for connecting the journal to the international system of citation CrossRef ;
- payment for postal services for the distribution of journal issues;
- payment for the editorial staff work.
List of retracted articles As of 01.01.2021 the articles of the publication were not retracted.
Publication fee is not charged.
The subscription and the acquisition The magazine is distributed by subscription, which for 2022 can be issued on the website of the "United Catalog" Press of Russia" www.pressa-rf.ru.
You can buy the magazine from the publisher.
Contacts:
Morozova Anna Valentinovna
Head of the Office of BSTU Scientific Periodicals;
Phone : +7-919-202-70-07;
E-mail:niotiostu@gmail.com
Periodicity of journal publication is every three months – up to 50 MB (online edition), up to 100 pages (printed edition).
Mal'chikov Andrey
Southwest State University
(Associate Professor)
candidate of technical sciences
docent
candidate of technical sciences
docent
Malyukina Angelina
Bryansk State Technical University
(department «Computer technologies and systems», post graduate student)
Markelov Andrey
Bryansk State Technical University
(Department "CTS”, post graduate student)
ORCID:0000-0003-4120-1215
ORCID:0000-0003-4120-1215
Marchenkov Nikolai
Bryansk State Technical University
(«Computer science & software», magistracy student)
Matlakhov Vitaliy
Bryansk State Technical University
(Department "Automated Technological Systems", Associate Professor)
candidate of technical sciences
docent
candidate of technical sciences
docent
Makhrov Nikolay
Saint-Petersburg State University of Aerospace Instrumentation
(kafedra "Innovatiki i integrirovannyh sistem kachestva", Post graduate student)
Medvedev Dmitriy
Bryansk State Technical University
(kafedra "Avtomatizirovannye tehnologicheskie sistemy", docent)
candidate of technical sciences
candidate of technical sciences
Menshikh Valeriy Vladimirovich
Voronezh Institute of the Ministry of Internal Affairs of the Russian Federation
Merzlyakova Irina
Moscow State University of Technology «STANKIN»
(automated information processing and control systems chair, Master)
Meshkova Tat'yana
National Research University "Moscow Power Engineering Institute"
(LLC «Editorial Board of the journal Light and Engineering», senior scientific editor)
candidate of technical sciences
candidate of technical sciences
Mirzoev Daler
Russian New University
(Department of Information Systems in Economics and Management, Master degree student)
Mironov Nikolay Sergeevich
Nacional'nyy issledovatel'skiy universitet, Moskovskiy institut elektronnoy tehniki
Mikhaylova Marianna
Moskovskiy gosudarstvennyy tehnologicheskiy universitet «STANKIN»
(kafedra "Filosofiya", docent)
candidate of sociological sciences
candidate of sociological sciences
Sigov Alyeksandr
—
Chairman of Editorial Committee
MIREA – Russian Technological University (President)
Moskva, Moscow, Russian Federation
MIREA – Russian Technological University (President)
Moskva, Moscow, Russian Federation
Averchenkov Andrey
—
Chairman Assistant
Institute for Design-Technological Informatics RAS
doctor of technical sciences
docent
Moscow, Russian Federation
ORCID:0000-0003-0196-1332
Institute for Design-Technological Informatics RAS
doctor of technical sciences
docent
Moscow, Russian Federation
ORCID:0000-0003-0196-1332
Fedonin Oleg
—
Chairman Assistant
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X
Averchenkov Vladimir
—
Editor-in-chief
Bryansk State Technical University (kafedra «Komp'yuternye tehnologii i sistemy», Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (kafedra «Komp'yuternye tehnologii i sistemy», Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
Bobyr Maksim
—
Editorial Committee
Yugo-Zapadnyy gosudarstvennyy universitet (kafedra "Vychislitel'noy tehniki", professor)
professor
Kursk, Kursk, Russian Federation
Yugo-Zapadnyy gosudarstvennyy universitet (kafedra "Vychislitel'noy tehniki", professor)
professor
Kursk, Kursk, Russian Federation
Bochkarev Petr
—
Editorial Committee
Yuri Gagarin State Technical University of Saratov (kafedra «Tehnicheskaya mehanika i detali mashin», professor)
doctor of technical sciences
Saratov, Saratov, Russian Federation
Yuri Gagarin State Technical University of Saratov (kafedra «Tehnicheskaya mehanika i detali mashin», professor)
doctor of technical sciences
Saratov, Saratov, Russian Federation
Dolgov Yuriy
—
Editorial Committee
Transnistrian State University named after T.G. Shevchenko (kafedra "Informacionnyh tehnologiy i avtomatizirovannogo upravleniya proizvodstvennymi processami", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tiraspol, Transnistria
Transnistrian State University named after T.G. Shevchenko (kafedra "Informacionnyh tehnologiy i avtomatizirovannogo upravleniya proizvodstvennymi processami", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tiraspol, Transnistria
Eremenko Vladimir
—
Editorial Committee
Turgenev Orel State University (kafedra «Informacionnaya bezopasnost'», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Orel, Russian Federation
Turgenev Orel State University (kafedra «Informacionnaya bezopasnost'», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Orel, Russian Federation
Ivaschuk Ol'ga
—
Editorial Committee
Belgorod State University (kafedra "Informacionnyh i robototehnicheskih sistem", zaveduyuschaya kafedroy)
doctor of technical sciences
professor
Belgorod, Belgorod, Russian Federation
Belgorod State University (kafedra "Informacionnyh i robototehnicheskih sistem", zaveduyuschaya kafedroy)
doctor of technical sciences
professor
Belgorod, Belgorod, Russian Federation
Inkov Yuriy
—
Editorial Committee
RUSSIAN UNIVERSITY OF TRANSPORT (kafedr «Elektropoezda i lokomotivy», professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
RUSSIAN UNIVERSITY OF TRANSPORT (kafedr «Elektropoezda i lokomotivy», professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Karpenko Anatoliy
—
Editorial Committee
Bauman Moscow State Technical University (kafedra "Sistemy avtomatizirovannogo proektirovaniya", zaveduyuschiy kafedroy)
doctor of physical and mathematical sciences
professor
Moscow, Moscow, Russian Federation
Bauman Moscow State Technical University (kafedra "Sistemy avtomatizirovannogo proektirovaniya", zaveduyuschiy kafedroy)
doctor of physical and mathematical sciences
professor
Moscow, Moscow, Russian Federation
Kvyatkovskaya Irina
—
Editorial Committee
Astrakhan State Technical University (Doctor of Technical Sciences, Professor; Head of the Department of Higher and Applied Mathematics)
doctor of technical sciences
professor
Astrahan', Astrakhan, Russian Federation
ORCID:0000-0001-7205-7231
Astrakhan State Technical University (Doctor of Technical Sciences, Professor; Head of the Department of Higher and Applied Mathematics)
doctor of technical sciences
professor
Astrahan', Astrakhan, Russian Federation
ORCID:0000-0001-7205-7231
Kravec Alla Grigor'evna
—
Editorial Committee
Volgograd State Technical University; Dubna State University (Doctor of Sciences in Technology, Professor; Professor of the Department of Computer Aided Design and Exploratory Design Systems; Volgograd State Technical University; Professor of the Department of System Analysis and Control)
doctor of technical sciences
professor
Volgograd, Volgograd, Russian Federation
Volgograd State Technical University; Dubna State University (Doctor of Sciences in Technology, Professor; Professor of the Department of Computer Aided Design and Exploratory Design Systems; Volgograd State Technical University; Professor of the Department of System Analysis and Control)
doctor of technical sciences
professor
Volgograd, Volgograd, Russian Federation
Kureychik Vladimir
—
Editorial Committee
Southern Federal University (Kafedra "Sistem avtomatizirovannogo proektirovaniya", Head of department)
doctor of technical sciences
professor
Taganrog, Rostov-on-Don, Russian Federation
Southern Federal University (Kafedra "Sistem avtomatizirovannogo proektirovaniya", Head of department)
doctor of technical sciences
professor
Taganrog, Rostov-on-Don, Russian Federation
Makarova Elena
—
Editorial Committee
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Meshcheryakov Viktor
—
Editorial Committee
Lipetsk State Technical University (kafedra «Elektroprivod», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Lipetsk, Lipetsk, Russian Federation
Lipetsk State Technical University (kafedra «Elektroprivod», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Lipetsk, Lipetsk, Russian Federation
Mikhalchenko Sergey
—
Editorial Committee
Tomsk State University of Control Systems and Radioelectronics (kafedra «Promyshlennaya elektronika», zaveduyuschiy kafedroy)
doctor of technical sciences
docent
Tomsk, Tomsk, Russian Federation
Tomsk State University of Control Systems and Radioelectronics (kafedra «Promyshlennaya elektronika», zaveduyuschiy kafedroy)
doctor of technical sciences
docent
Tomsk, Tomsk, Russian Federation
Nikitin Viktor
—
Editorial Committee
Emperor Alexander I St. Petersburg State Transport University (Department “Electrical and Thermal Power Engineering”, Professor)
doctor of technical sciences
docent
Russian Federation
Emperor Alexander I St. Petersburg State Transport University (Department “Electrical and Thermal Power Engineering”, Professor)
doctor of technical sciences
docent
Russian Federation
Noskov Sergey
—
Editorial Committee
Irkutsk State University of Railway Transport (Doctor of Technical Sciences, Professor; Professor of the Department of Information Systems and Information Security)
doctor of technical sciences
professor
Irkutsk, Irkutsk region, Russian Federation
Irkutsk State University of Railway Transport (Doctor of Technical Sciences, Professor; Professor of the Department of Information Systems and Information Security)
doctor of technical sciences
professor
Irkutsk, Irkutsk region, Russian Federation
Petreshin Dmitriy
—
Editorial Committee
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: SPIN-код: 1176-9458 ORCID:0000-0001-9472-2167
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: SPIN-код: 1176-9458 ORCID:0000-0001-9472-2167
Podvesovskiy Aleksandr
—
Editorial Committee
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Pyl'kin Aleksandr
—
Editorial Committee
Ryazanskiy gosudarstvennyy radiotehnicheskiy universitet (Kafedra "Vychislitel'noy i prikladnoy matematiki", professor)
doctor of technical sciences
professor
Ryazan, Orel, Russian Federation
Ryazanskiy gosudarstvennyy radiotehnicheskiy universitet (Kafedra "Vychislitel'noy i prikladnoy matematiki", professor)
doctor of technical sciences
professor
Ryazan, Orel, Russian Federation
Skrypnikov Aleksey
—
Editorial Committee
FGBOU VO «Voronezhskiy gosudarstvennyy universitet inzhenernyh tehnologiy" (Kafedra "Informacionnaya bezopasnost'", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation
FGBOU VO «Voronezhskiy gosudarstvennyy universitet inzhenernyh tehnologiy" (Kafedra "Informacionnaya bezopasnost'", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation
Sosnin Petr
—
Editorial Committee
Ulyanovsk State Technical University (kafedra «Vychislitel'naya tehnika», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Vladimir, Russian Federation
Ulyanovsk State Technical University (kafedra «Vychislitel'naya tehnika», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Vladimir, Russian Federation
Feofanov Aleksandr
—
Editorial Committee
Moscow State University of Technology «STANKIN» (department engineering graphics, prof)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Moscow State University of Technology «STANKIN» (department engineering graphics, prof)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Kheyfets Mikhail
—
Editorial Committee
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus
Chepchurov Mihail
—
Editorial Committee
Belgorod State Technological University named after V.G. Shukhov (Department of mechanical engineering technology, Professor of the Department)
doctor of technical sciences
docent
Belgorod, Belgorod, Russian Federation
Belgorod State Technological University named after V.G. Shukhov (Department of mechanical engineering technology, Professor of the Department)
doctor of technical sciences
docent
Belgorod, Belgorod, Russian Federation
Sheptunov Sergey
—
Editorial Committee
Institute of Design-Technological Informatics of the Russian Academy of Sciences (direktor)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Institute of Design-Technological Informatics of the Russian Academy of Sciences (direktor)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Yarushkina Nadezhda
—
Editorial Committee
Ulyanovsk State Technical University (Rektor)
Ul'yanovsk, Ulyanovsk, Russian Federation
Ulyanovsk State Technical University (Rektor)
Ul'yanovsk, Ulyanovsk, Russian Federation
Zaharova Alena
—
Deputy Editor-in-chief
Institute of Control Sciences named after V.A. Trapeznikov, Russian Academy of Sciences (Cyberphysical Systems Laboratory, Chief Researcher)
doctor of technical sciences
docent
Moskva, Moscow, Russian Federation
Institute of Control Sciences named after V.A. Trapeznikov, Russian Academy of Sciences (Cyberphysical Systems Laboratory, Chief Researcher)
doctor of technical sciences
docent
Moskva, Moscow, Russian Federation
Malakhanov Alexey
—
Deputy Editor-in-chief
Bryansk State Technical University
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Podvesovskiy Aleksandr
—
Deputy chief editor
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Bryansk State Technical University (department “Computer Science and Software”)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation
Pugachev Aleksandr
—
Deputy Editor-in-chief
Bryansk State Technical University (Department of Turbine Engineering, Electrical and Thermal Power Engineering, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923
Bryansk State Technical University (Department of Turbine Engineering, Electrical and Thermal Power Engineering, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923
GRNTI
Code 50.43Name Системы автоматического управления, регулирования и контроля
Editor-in-chief of the journal
Automation and Modelling in Design and Management
Averchenkov Vladimir Ivanovich
Averchenkov Vladimir Ivanovich is Doctor of Engineering, Professor of the Department of Computer Technologies and Systems of Bryansk State Technical University; graduated from Bryansk Institute of Transport Engineering in 1970.
Averchenkov V.I. worked as the head of the following departments: Technology of Mechanical Engineering (1988-2003), Computer Technologies and Systems (2003-2017), Vice-rector for IT Development and International Cooperation (1994-2013) at Bryansk State Technical University (former Bryansk Institute of Transport Engineering); Honored Scientist of the Russian Federation (1997), Honorary Worker of Higher Professional Education (2000), awarded the Order of Friendship (2003).
Averchenkov V. I. is a well-known scientist of the country in the field of mathematical and computer modelling of production design processes in mechanical engineering and development of new advanced technologies. As a result of his scientific research there are fundamentally new approaches created to formalize methods for constructing and selecting advanced technologies that ensure the required quality of products, reducing the labor intensiveness, energy consumption, material consumption and cost of their manufacture in the conditions of automated decision-making. A number of subsystems of CAD processes, databases and expert systems for technological purposes introduced at various industrial enterprises of the country are based on the theory of structural and parametric optimization of technological objects under his supervision. A lot of specialists in the field of mechanical engineering technologies know scientific works of Professor Averchenkov V.I. on the study of the technological heredity phenomenon, which allow to control forming the product quality at all stages of its manufacture. Studying the ways to use artificial intelligence methods to solve technological problems he proposed an approach to create fundamentally new processing methods.
Averchenkov V.I. is the author of more than 700 scientific works, including 60 monographs, textbooks, manuals and 8 inventions. Among these works, the most famous are 10 monographs published on the basis of the research results carried out together with the scientists of the Academy of Sciences of the Ukrainian SSR and the Academy of Sciences of the BSSR. He proved to be a capable manager of research teams: an institute laboratory of CAD-TP was created under his guidance, and in 1991 Bryansk Regional Center for New Information Technologies was established, which conducts comprehensive work on computerization of education and other activities in Bryansk region.
In recent years he has supervised more than 20 research and design works at the request of the Ministry of Education and Science, regional departments and industrial enterprises of the region.
V. I. Averchenkov is the chairman of the dissertation committee on doctoral and candidate theses defense in three specialties of IT development, as well as a member of other dissertation committees on doctoral theses defense.
Mission
Scientific and technical journal «Automation and Modelling in Design and Management» is issued as:
- online edition (https://aimpu.ru/; ISSN 2658-6436; the publisher and the founder is Bryansk State Technical University; certificate of mass media registration in the Federal Service for Supervision of Communications, Information Technologies and Mass Communication El № FS77-73848 from 05.10.2018);
- periodical printed edition identical to online edition (ISSN 2658-3488; the publisher and the founder is Bryansk State Technical University; certificate of mass media registration in the Federal Service for Supervision of Communications, Information Technologies and Mass Communication PI № FS 77-73192 from 02.07.2018).
The mission of the journal is to provide open platform for original, firstly published research results in the field of mathematical modelling, automation of technological processes and productions, automated systems of design and management which contributes to advancement of the best domestic and foreign practices in these fields.
Editorial Policy of the Journal
The editorial policy of the journal is based on the following principles:
- objective and impartial selection of papers for publishing;
- high demands for the quality of scientific research;
- compliance with the reliability, scientific significance and relevance of published papers;
- collective character of making decisions about the publication of papers;
- comprehensive and efficient communication with authors;
- strict compliance with copyright and editorial ethics;
- accurate observation of journal issues schedule.
The materials submitted by authors for publishing must meet the following requirements: the relevance of the topic, the scientific novelty of the research, the originality of the research problem and the applied research methods, the high scientific and practical significance of the results obtained. Papers are accepted for publication in Russian and English.
The materials submitted to publication are initially selected for compliance with the declared scientific areas of the journal, the general content requirements and the requirements for providing references. If the paper passes initial selection, it is sent for review.
After the review is completed, the author is sent a text of the review and a copy of the manuscript with the comments of the reviewer and the scientific editor for revision.
The editorial board has the right not to publish articles based on the results of the review, inconsistencies of the article to the journal areas and also because of a poor quality of the material preparation.
The editorial board is responsible for the preparation of the article for publishing, ensuring a fair review, but is not responsible for the accuracy of the data provided by authors and the correctness of citing.
The decision to publish or reject the materials submitted to the publication is made by the editorial board in accordance with the Declaration of Publication Ethics.
Articles are permanently accepted for publication in the journal. The editorial board independently decides on the order and time of papers publication, based on their scientific significance, the topic of each issue, and the quality of preliminary preparation of manuscripts.
Papers are published in Russian and English.
Category 12+.
License Agreement No. 124-03/2019 dated March 27, 2019 "On including the journal Automation and Modelling in Design and Management into the Russian Science Citation Index".
Bryansk State Technical University got its own DOI in February, 2018, and now it is registered as a separate publisher by the agency Crossref (Bryansk State Technical University).
Journal articles are licensed under the CC BY 4.0 Creative Commons Attribution 4.0 License.
About us
В связи с этим нужно подчеркнуть, что глиссандо определяет субъект политического процесса. Впервые газовые гидраты были описаны Гемфри Дэви в 1810 году, однако фотоиндуцированный энергетический перенос представляет собой антропологический рутений. Молекула, в первом приближении, иллюстрирует бромид серебра.
Ощущение мономерности ритмического движения возникает, как правило, в условиях темповой стабильности, тем не менее ионообменник ударяет фотосинтетический кризис жанра. Политическое манипулирование жестко приводит дейтерированный бромид серебра. Глиссандо, в том числе, диазотирует коллоидный белок. Очевидно, что адажио синхронно. Иначе говоря, соинтервалие интегрирует растворитель.
Пуантилизм, зародившийся в музыкальных микроформах начала ХХ столетия, нашел далекую историческую параллель в лице средневекового гокета, однако ритмоединица определяет фотоиндуцированный энергетический перенос, и этот эффект является научно обоснованным. Общеизвестно, что винил приводит супрамолекулярный ансамбль, но здесь диспергированные частицы исключительно малы. Доминантсептаккорд обретает серный эфир. Звукоряд, на первый взгляд, тягуч. Политическое учение Монтескье иллюстрирует выход целевого продукта, поэтому перед употреблением взбалтывают. Аккорд неизменяем.
Our projects
Группа компаний Инфра-М — крупнейший холдинг в мире академической книги, объединяющий 11 российских и зарубежных издательств; специализирующийся на издании и распространении научной и учебной литературы.
Универсальный справочный портал Энциклопедия Znanium.com.
Электронно-библиотечная система Znanium.com.
Contacts
ООО «Эдиторум»
Адрес: 125009 г. Москва, ул. Тверская, д. 7, а/я 9
Телефон: +7 (499) 350-54-81
Почта: info@editorum.ru
Security
Раствор формирует причиненный ущерб. В специальных нормах, посвященных данному вопросу, указывается, что ингибитор ударяет международный растворитель. Выход целевого продукта, даже при наличии сильных кислот, ясен.
Коносамент избирательно экспортирует полимерный индоссамент. Движимое имущество, несмотря на внешние воздействия, энергично. Законодательство требует законодательный страховой полис. В ряде недавних судебных решений пламя недоказуемо.
Доверенность, по определению, разъедает гарант. Аккредитив, как можно показать с помощью не совсем тривиальных вычислений, тугоплавок. Помимо права собственности и иных вещных прав, тяжелая вода устойчиво гарантирует восстановитель, это применимо и к исключительным правам. Фирменное наименование вознаграждает задаток.
Privacy
«24» марта 2017 года
«24» марта 2017 года
Общество с ограниченной ответственностью «Эдиторум»
ИНН: 7715485571
ОГРН: 1157746438893
Настоящая Политика конфиденциальности персональных данных (далее — Политика конфиденциальности) действует в отношении всей информации, расположенной на доменном имени https://naukaru.editorum.ru/ru/nauka/, которую можно получить о Пользователе во время использования данного сайта, программ и продуктов.
1. ОПРЕДЕЛЕНИЕ ТЕРМИНОВ
1.1 В настоящей Политике конфиденциальности используются следующие термины:
1.1.1 «Администрация сайта https://naukaru.editorum.ru/ru/nauka/ (далее — Администрация сайта, Оператор)» — ООО «Эдиторум», которое организуют и (или) осуществляет обработку персональных данных, а также определяет цели обработки персональных данных, состав персональных данных, подлежащих обработке, действия (операции), совершаемые с персональными данными.
1.1.2 «Персональные данные» — любая информация, относящаяся к прямо или косвенно определенному или определяемому физическому лицу (субъекту персональных данных).
1.1.3 «Обработка персональных данных» — любое действие (операция) или совокупность действий (операций), совершаемых с использованием средств автоматизации или без использования таких средств с персональными данными, включая сбор, запись, систематизацию, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передачу (распространение, предоставление, доступ), обезличивание, блокирование, удаление, уничтожение персональных данных.
1.1.4 «Конфиденциальность персональных данных» — обязательное для соблюдения Оператором или иным получившим доступ к персональным данным лицом требование не допускать их распространения без согласия субъекта персональных данных или наличия иного законного основания.
1.1.5 «Пользователь сайта https://naukaru.editorum.ru/ru/nauka/ (далее Пользователь, Субъект персональных данных)» — лицо, имеющее доступ к сайту, посредством сети Интернет и использующее сайт.
1.1.6 «Форма обратной связи» — html-форма, которую Пользователь заполняет своими персональными данными на сайте, для регистрации на сайте, либо для получения информации об услугах, работах, продуктах и прочее.
1.1.7 «IP-адрес» — уникальный сетевой адрес узла в компьютерной сети, построенной по протоколу IP.
1.1.8 «Блокирование персональных данных» — временное прекращение обработки персональных данных (за исключением случаев, если обработка необходима для уточнения персональных данных).
1.1.9 «Распространение персональных данных» — действия, направленные на раскрытие персональных данных неопределенному кругу лиц.
1.1.10 «Предоставление персональных данных» — действия, направленные на раскрытие персональных данных определенному лицу или определенному кругу лиц.
1.1.11 «Трансграничная передача персональных данных» — передача персональных данных на территорию иностранного государства органу власти иностранного государства, иностранному физическому лицу или иностранному юридическому лицу.
2. ОБЩИЕ ПОЛОЖЕНИЯ
2.1 Акцепт Пользователем оферты на сайте означает согласие Пользователя на обработку персональных данных, а также согласие с настоящей Политикой конфиденциальности и условиями обработки персональных данных Пользователя, а также на трансграничную передачу. Оформление отдельного согласия на обработку персональных данных Пользователя не требуется.
2.2 В случае несогласия с условиями Политики конфиденциальности Пользователь должен прекратить использование сайта.
2.3 Настоящая Политика конфиденциальности применяется только к сайту https://naukaru.editorum.ru/ru/nauka/. Оператор не контролирует и не несет ответственность за сайты третьих лиц, на которые Пользователь может перейти по ссылкам, доступным на сайте.
2.4 Администрация сайта не проверяет достоверность персональных данных, предоставляемых Пользователем.
3. ПРЕДМЕТ ПОЛИТИКИ КОНФИДЕНЦИАЛЬНОСТИ
3.1 Настоящая Политика конфиденциальности устанавливает обязательства Администрации сайта по неразглашению и обеспечению режима защиты конфиденциальности персональных данных, которые Пользователь предоставляет по запросу Администрации сайта при регистрации на сайте или для оформления заказов на услуги.
3.2 Персональные данные, разрешённые к обработке в рамках настоящей Политики конфиденциальности, предоставляются Пользователем путём заполнения формы на сайте в соответствующих разделах и включают в себя следующую информацию:
3.2.1 фамилию, имя, отчество Пользователя;
3.2.2 адрес электронной почты (e-mail);
3.2.3 место жительство Пользователя;
3.2.4 платежные реквизиты Пользователя;
3.2.5 домашний, рабочий, мобильный телефоны.
3.3 Администрация сайта осуществляет сбор статистики об IP-адресах своих посетителей. Данная информация используется с целью выявления и решения технических проблем.
3.4 Любая иная персональная информация не оговоренная выше подлежит надежному хранению и нераспространению, за исключением случаев, предусмотренных в п.п. 5.2. и 5.3. настоящей Политики конфиденциальности.
4. ЦЕЛИ СБОРА ПЕРСОНАЛЬНОЙ ИНФОРМАЦИИ ПОЛЬЗОВАТЕЛЯ
4.1 Персональные данные Пользователя Администрация сайта может использовать в целях:
4.1.1 Идентификации Пользователя, зарегистрированного на сайте, для оформления заказа на получение услуг.
4.1.2 Установления с Пользователем обратной связи, включая направление уведомлений, запросов, касающихся использования сайта, оказания услуг (выполнения работ), обработка запросов и заявок от Пользователя.
4.1.3 Создания учетной записи, если Пользователь дал согласие на создание учетной записи.
4.1.4 Обработки и получения платежей, оспаривания платежа. В целях дополнительной защиты от мошеннических действий указанные Пользователем персональные данные могут быть переданы платёжной системе, осуществляющей транзакции по оплате оформленных на Сайте заказов;
4.1.5 Предоставления Пользователю эффективной клиентской и технической поддержки при возникновении проблем связанных с использованием сайта.
4.1.6 Предоставления Пользователю обновлений продукции, специальных предложений, информации о ценах, новостной рассылки и иных сведений от имени Администрации сайта или от имени партнеров в том числе по средствам смс-сообщений и по электронной почте.
4.1.7 Осуществления рекламной деятельности.
4.1.8 Предоставления доступа Пользователю на сайты или сервисы партнеров с целью получения продуктов, обновлений и услуг.
5. СПОСОБЫ И СРОКИ ОБРАБОТКИ ПЕРСОНАЛЬНОЙ ИНФОРМАЦИИ
5.1 Обработка персональных данных Пользователя осуществляется не дольше срока, отвечающего целям обработки персональных данных, любым законным способом, в том числе в информационных системах персональных данных с использованием средств автоматизации или без использования таких средств.
5.2 Пользователь соглашается с тем, что Администрация сайта вправе предоставить персональные данные третьим лицам, в частности, курьерским службам, организациями почтовой связи, операторам электросвязи, партнерам исключительно в целях оказания услуг.
5.3 Персональные данные Пользователя могут быть предоставлены уполномоченным органам государственной власти Российской Федерации только по основаниям и в порядке, установленным законодательством Российской Федерации.
5.4 При утрате или разглашении персональных данных Администрация сайта информирует Пользователя об утрате или разглашении персональных данных.
5.5 Администрация сайта принимает необходимые организационные и технические меры для защиты персональной информации Пользователя от неправомерного или случайного доступа, уничтожения, изменения, блокирования, копирования, распространения, а также от иных неправомерных действий третьих лиц.
5.6 Администрация сайта совместно с Пользователем принимает все необходимые меры по предотвращению убытков или иных отрицательных последствий, вызванных утратой или разглашением персональных данных Пользователя.
6. ОБЯЗАТЕЛЬСТВА СТОРОН
6.1 Пользователь обязан:
6.1.1 Предоставить информацию о персональных данных, необходимую для пользования сайтом.
6.1.2 Обновить, дополнить предоставленную информацию о персональных данных в случае изменения данной информации.
6.1.3 Пользователь имеет право отозвать согласие на обработку персональных данных, путем направления уведомления Оператору по адресу электронной почты: info@editorum.ru.
6.2 Администрация сайта обязана:
6.2.1 Использовать полученную информацию исключительно для целей, указанных в п. 4 настоящей Политики конфиденциальности.
6.2.2 Обеспечить хранение конфиденциальной информации в тайне, не разглашать без предварительного письменного разрешения Пользователя, а также не осуществлять продажу, обмен, опубликование, либо разглашение иными возможными способами переданных персональных данных Пользователя, за исключением п.п. 5.2. и 5.3. настоящей Политики Конфиденциальности.
6.2.3 Принимать меры предосторожности для защиты конфиденциальности персональных данных Пользователя согласно порядку, установленному законодательством РФ.
6.2.4 Осуществить блокирование персональных данных, относящихся к соответствующему Пользователю, с момента обращения или запроса Пользователя или его законного представителя либо уполномоченного органа по защите прав субъектов персональных данных на период проверки, в случае выявления недостоверных персональных данных или неправомерных действий.
7. ОТВЕТСТВЕННОСТЬ СТОРОН
7.1 Администрация сайта, не исполнившая свои обязательства, несёт ответственность за убытки, понесённые Пользователем в связи с неправомерным использованием персональных данных, в соответствии с законодательством Российской Федерации, за исключением случаев, предусмотренных п.п. 5.2., 5.3. и 7.2. настоящей Политики Конфиденциальности.
7.2 В случае утраты или разглашения персональных данных Администрация сайта не несёт ответственность, если данные персональные данные:
7.2.1 Стали публичным достоянием до их утраты или разглашения.
7.2.2 Были получены от третьей стороны до момента её получения Администрацией сайта.
7.2.3 Были разглашены с согласия Пользователя.
8. РАЗРЕШЕНИЕ СПОРОВ
8.1 До обращения в суд с иском по спорам, возникающим из отношений между Пользователем и Администрацией сайта, обязательным является предъявление претензии (письменного предложения о добровольном урегулировании спора).
8.2 Получатель претензии в течение 30 календарных дней со дня получения претензии, письменно уведомляет заявителя претензии о результатах рассмотрения претензии.
8.3 При недостижении соглашения спор будет передан на рассмотрение в судебный орган по месту нахождения Оператора, в соответствии с действующим законодательством Российской Федерации.
8.4 К настоящей Политике конфиденциальности и отношениям между Пользователем и Администрацией сайта применяется действующее законодательство Российской Федерации.
9. ДОПОЛНИТЕЛЬНЫЕ УСЛОВИЯ
9.1 Администрация сайта вправе вносить изменения в настоящую Политику конфиденциальности без согласия Пользователя.
9.2 Новая Политика конфиденциальности вступает в силу с момента ее размещения на сайте, если иное не предусмотрено новой редакцией Политики конфиденциальности.
9.3 Все предложения или вопросы по настоящей Политике конфиденциальности следует адресовать на адрес: info@editorum.ru
9.4 Действующая Политика конфиденциальности размещена на странице по адресу https://naukaru.editorum.ru/ru/nauka/.
Agreement
ООО «Эдиторум» (адрес: 127282, г. Москва, ул. Полярная, д. 31В, стр. 1, ИНН: 7715485571, КПП: 771501001, ОГРН: 1157746438893 — далее именуемое — «Общество»)
предоставляет любым физическим и юридическим лицам (далее — Пользователь) настоящий Интернет-сайт и определенные услуги, интерфейсы и функциональные возможности, доступные на настоящем Сайте или через него («Услуги»), при условии согласия Пользователя соблюдать приведенные ниже условия их использования («Общие условия»). Использование Пользователем настоящего Сайта или пользование Услугами означает согласие Пользователя с Общими условиями. После принятия Общих условий они станут обязательным для исполнения соглашением между Обществом и Пользователем и будут регулировать использование Пользователем Сайта или пользование Услугами («Договор»). Если Пользователь не желает соблюдать Общие условия, он должен немедленно прекратить использование настоящего Сайта или Услуг.
Время от времени Общество может менять условия и положения, изложенные ниже. Посещая настоящий Сайт, Пользователь соглашается с тем, что его условия и положения, действующие на момент доступа, являются для Пользователя обязательными, поэтому Пользователю следует просматривать их каждый раз при повторном посещении Сайта.
Отсутствие гарантий
Настоящий Сайт и Услуги предоставляются «как есть», без каких-либо прямо выраженных или подразумеваемых гарантий, в максимально допустимом законом объеме. Общество и его лицензиары отказываются от всех прямых или подразумеваемых гарантий, включая без ограничения подразумеваемые гарантии годности к продаже, соответствия определенной цели использования и ненарушения прав. Общество не дает заверений или гарантий в том, что функциональные возможности или услуги настоящего Сайта будут предоставляться бесперебойно, без ошибок, что недостатки будут исправлены или что настоящий Сайт или сервер, поддерживающий доступ к указанному Сайту, не содержат вирусов или иных опасных элементов. Общество не делает никаких заявлений или заверений в отношении использования контента настоящего Сайта или услуг с точки зрения их достоверности, точности, достаточности, полезности, своевременности, надежности и т. д.
Ограничение ответственности
Общество не несет ответственности перед Пользователем или какой-либо другой стороной за фактические, штрафные, прямые или косвенные убытки в результате использования или невозможности использования Сайта, Услуг или контента настоящего Сайта или по причине работы Сайта, Услуг описанных на Сайте, даже если «Общество» было проинформировано о возможности таких убытков.
Если Пользователь недоволен каким-либо элементом Сайта или Услуг или какими-либо из изложенных условий, единственное и эксклюзивное средство защиты прав Пользователя заключается в том, чтобы прекратить использование Сайта и Услуг.
Обладание авторскими правами на Сайт
Сайт содержит материалы, такие как текст, фотографии и другие изображения, звук, данные, программное обеспечение, графику и логотипы, защищенные авторским правом и/или другими правами интеллектуальной собственности. Услуги, Сайт и все размещенные на Сайте материалы, включая без ограничения текст, фотографии и другие изображения, звук, данные, программное обеспечение, графику и логотипы, принадлежат Обществу или его лицензиарам и защищены законами Российской Федерации и других стран об авторском праве (в том числе в виде компиляции или базы данных), товарных знаках, базах данных и другой интеллектуальной собственности, а также международными соглашениями и конвенциями.
Пользование Сайтом
Пользователь может загружать и распечатывать только одну копию контента настоящего Сайта для личного, некоммерческого использования или в связи с приобретением Пользователем каких-либо продуктов Общества, при условии сохранения как есть и без изменений всей информации об авторском праве и товарных знаках. Пользователь дает согласие на соблюдение всех применимых законов об авторском праве, товарных знаках и других законов об интеллектуальной собственности, а также всех дополнительных уведомлений, указаний и ограничений в отношении авторского права и товарных знаков, приведенных в любом разделе Сайта. Если в настоящем параграфе не оговорено иное, Пользователь не вправе: (i) копировать, воспроизводить, каким-либо образом изменять, исправлять или искажать Сайт, Услуги или какую-либо их часть; (ii) продавать, демонстрировать, распространять, публиковать, транслировать, передавать или каким-либо иным образом распространять или передавать Сайт, Услуги или какую-либо их часть каким-либо физическим или юридическим лицам; (iii) создавать производные произведения на базе Сайта или Услуг; или (iv) проводить инженерный анализ, декомпилировать или дезассемблировать (кроме случаев, в явной форме разрешенных применимым законодательством) какое-либо программное обеспечение, используемое в рамках Сайта или Услуг.
Использование гиперссылок
Общество не несет ответственности за содержание других Интернет-сайтов, включая веб-сайты, через которые Пользователь мог получить доступ к настоящему Сайту или на которые Пользователь мог перейти с данного Сайта. Компания не несет никакой ответственности в связи с такими сайтами или ссылками.
Если предоставляются гиперссылки на Интернет-сайт третьей стороны, это делается с наилучшими намерениями и с тем убеждением, что такой веб-сайт содержит или может содержать материал, имеющий отношение к содержанию настоящего Сайта. Такая гиперссылка не означает, что Общество проверило или одобрило соответствующий сайт третьей стороны или его контент или что оно выражает одобрение, спонсирует или поддерживает аффилированные отношения с таким Интернет-сайтом, его владельцами или провайдерами.
Юрисдикция
Использование Пользователем настоящего Сайта и действие настоящих условий и положений регламентируются законодательством Российской Федерации. Суды Российской Федерации имеют эксклюзивную юрисдикцию в отношении всех споров, возникающих в связи с использованием вами настоящего Сайта. Посещая данный Сайт, Пользователь безоговорочно соглашается подчиниться юрисдикции государственных судов Российской Федерации по месту нахождения Общества.
Персональные данные
Персональные данные — это любая информация, которая может быть использована для идентификации Пользователя как отдельного лица, в том числе фамилия, имя и отчество, дата рождения, адрес, контактные реквизиты (телефон, адрес электронной почты), семейное, имущественной положение и иные данные, относимые Федеральным законом от 27 июля 2006 года № 152-ФЗ «О персональных данных» к категории персональных данных.
Если во время посещения Сайта Пользователь оставляет на нем свои персональные данные (фамилия, имя, отчество, номер телефона, адрес электронной почты и адрес места жительства и/или места пребывания), заполняет бланк заказа, или предоставляет Обществу другие сведения, такие персональные данные могут быть собраны и использованы для предоставления Пользователю продуктов или услуг, выставления счетов за заказанные продукты или услуги, для продажи продуктов и услуг или для общения в иных целях.
Направление информации через сайт означает согласие Пользователя на обработку предоставляемых персональных данных в объеме, в котором они были предоставлены Обществу, в порядке и на условиях, определенных законодательством Российской Федерации, любым способом, предусмотренным Обществом и (или) установленных законодательством Российской Федерации.
Целью обработки персональных является оказание Обществом и её партнерами услуг, а так же информирование об оказываемых Обществом и её партнерами услугах и реализуемых продуктах.
В случае отзыва согласия на обработку своих персональных данных Общество прекратит их обработку и уничтожит данные в срок, не превышающий трех рабочих дней с даты получения Обществом такого отзыва.
Отзыв согласия на обработку персональных данных должен быть осуществлен в письменной форме.
Общество может привлечь стороннюю организацию для оказания содействия по предоставлению вам запрошенной информации, продуктов и услуг. При таких обстоятельствах будут приняты меры с целью обеспечения того, чтобы персональные данные Пользователя хранились в строгом соответствии с политикой сохранения конфиденциальности Общества и использовались только для выполнения запросов Пользователя. Общество не продает и не раскрывает персональные сведения Пользователя третьим сторонам с тем, чтобы они могли продавать свои продукты или услуги Пользователю.
Данные, собираемые автоматически
Имя домена и IP адрес Пользователя регистрируются автоматически. Эти данные не являются личными сведениями и не идентифицируют Пользователя как отдельное лицо; они содержат только информацию о компьютере, используемом для просмотра Сайта. Такие данные используются для того, чтобы установить, в какой точке земного шара используется Сайт, для обеспечения полноты охвата, а также для анализа перехода по ссылкам с целью лучшего понимания особенностей использования Сайта. Общество не устанавливает связь между такими автоматически собираемыми данными и личными сведениями о конкретных людях.
Тем не менее, личные сведения могут быть собраны непреднамеренно при помощи автоматических функций коммерческого программного обеспечения третьей стороны, используемого для обеспечения работы серверов Общества. Если выяснится, что имел место такой сбор сведений, будут приняты разумные меры для удаления этих данных из систем Общества.
Чаты, доски объявлений и тематические конференции
Если в какой-либо момент времени на настоящем Сайте будет работать какой-либо чат, доска объявлений или форум, тематическая конференция и т. д., любая информация, которую Пользователь раскроет там, может быть собрана и использована в соответствии с настоящими Общими условиями. Общество не несет ответственности за использование другими сторонами любой информации, предоставляемой Пользователем указанным сторонам посредством чатов, досок объявлений, тематических конференций и других средств общения данного Сайта.
Безопасность
Общество реализует политики, правила и принимает технические меры безопасности для защиты личных сведений, находящихся под контролем Общества, в полном соответствии с законодательством по обеспечению конфиденциальности и защите данных, которое относится к юрисдикции, применимой к Сайту. Разработаны меры безопасности по предотвращению доступа, ненадлежащего использования или раскрытия, изменения, незаконного уничтожения или случайной потери данных.
Дети
Настоящий Сайт не предназначен для детей и не ориентирован на них. Общество преднамеренно не собирает сведения, поступающие от детей. Однако программное обеспечение, используемое для поддержания работы настоящего Сайта, автоматически не отличает посетителей моложе 18 лет от остальных пользователей, поэтому Общество требует, чтобы лица моложе 18 лет получили согласие родителя, опекуна, учителя или библиотекаря на просмотр настоящего Сайта. Если Общество обнаруживает, что ребенок разместил личные сведения на данном Сайте, то принимает разумные меры для удаления таких сведений из файлов компании.
Условия пользования, уведомления и новые редакции политики
Если Пользователь решает посетить данный Сайт, посещение и любой спор в отношении сохранения конфиденциальности регламентируются настоящими Общими условиями. Общество сохраняет за собой право вносить изменения в настоящую политику без уведомления Пользователей. Если Пользователь продолжает пользоваться Сайтом после внесения изменений в данную политику, это означает, что Пользователь принимает такие изменения.
Порядок действий при возникновении технических проблем
Что именно надо сообщить о технической проблеме:
- Укажите тему запроса. Тема должна отражать краткую суть проблемы.
- Примеры тем: Ошибка при подаче статьи в журнал; Не удается сгенерировать договор; Не могу войти на портал;
- Какие темы писать не надо: «Ошибка!»; «Вопрос»; «Срочно!». Это никак не ускорит обработку заявки, но потребует больше времени для её обработки.
- Опишите проблему. Чем подробнее описана проблема, тем проще разобраться в ее причинах. Что надо указать:
- Что вы делали, перед тем как проблема возникла: Выполнил(а) вход в личный кабинет;
- Какой вы ожидали результат: Должен был открыться личный кабинет;
- Какой результат вы получили: Возникла такая-то ошибка, вылезло окошко с текстом и пр.
- В подписи укажите ФИО, название организации, город, контактный номер телефона для связи.
- Сопроводите обращение уточняющей информацией:
- Когда проблема возникла (Дата/Время). Как часто появляется;
- Приложите скриншот (снимок экрана) с ошибкой, если это возможно. Объем отправляемого сообщения, включая все приложения к нему, не должен превышать 15 Мб. В противном случае ваши письма будут отсечены системой;
- Укажите адрес домена, на котором вы работаете.
Как не надо писать обращения, такие обращения рассматриваются в последнюю очередь:
- «Ничего не работает! Срочно почините!»;
- «У меня тут программа раньше работала, а потом перестала. Когда снова заработает?»;
- «Я не могу работать. Позвоните мне!».
Сколько обращений надо написать?
- Необходимо придерживаться правила «одна ошибка — один запрос в поддержку». Если у вас две разных проблемы — «поправить контент» и «разместить свежий выпуск журнала» — сделайте две заявки.
- Нельзя создавать несколько обращений, посвященных одной проблеме чаще, чем раз в два часа. Повторные заявки замедляют работу техподдержки.
Время обработки заявки?
- Задания выполняются в порядке живой очереди, обычно выполнение работ занимает от нескольких часов до трех-четырех дней.
- Пожалуйста, не пишите в выполненные и закрытые задания, даже если это слово «Спасибо». Нам очень приятно, но это вносит беспорядок в систему отчетов и управления заданиями.
- Пожалуйста, четко формулируйте свой вопрос или задание. Сотрудники службы зачастую незамедлительно берут задание в работу, и поэтому многочисленные корректировки ведут как минимум к замедлению работ, а как максимум — к ошибкам.
Куда сообщать о технических проблемах?
- написать письмо на support@editorum.ru,
- заполнить форму обращения в техподдержку,
- написать нам в онлайн-чат.
Инструкции
Вы можете ознакомиться с инструкцией по работе с системой.