employee
Don State Technical University
Rostov-on-Don, Rostov-on-Don, Russian Federation
The article presents examined properties of transformation of milling cutter shape-generating trajectories relative to work into parameters of the microrelief and the shape of the surface being formed in the milling operation. It is proved that geometric characteristics of the cutting tool, technological modes and features of the dynamics of the milling system have an effect on the formation of the surface. It testifies that: it is necessary to take into account independent processes in the chip formation zone unrelated to formability trajectories
milling operation, coherence function, formed surface, plastic deformation, forming operation, tool wear
1. Zakovorotnyy, V.L., Luk'yanov, V.F., Fam, D.T., Fam, T.H. Kinematicheskie vozmuscheniya stacionarnyh traektoriy formoobrazuyuschih dvizheniy v dinamicheskoy sisteme rezaniya // Vestnik Donskogo gosudarstvennogo tehnicheskogo universiteta. - 2011. - T. 11. № 9 (60). - S. 1555-1563.
2. Zakovorotnyy V., Gubanova A., Hristoforova V. Bifurkacii stacionarnyh mnogoobraziy, formiruemyh v okrestnosti ravnovesiya v dinamicheskoy sisteme rezaniya // Vestnik Donskogo gosudarstvennogo tehnicheskogo universiteta. - 2015. - T. 15. №1 (80). - S. 11-22.
3. Zakovorotnyy V., Gubanova A., Hristoforova V. Odin sluchay formirovaniya haoticheskih attraktorov v dinamicheskoy sisteme rezaniya // Vestnik Donskogo gosudarstvennogo tehnicheskogo universiteta. - 2015. - T. 15. №2 (81). - S. 11-21.
4. Zakovorotnyy V., Fam D., Nguen T. Matematicheskoe modelirovanie i parametricheskaya identifikaciya dinamicheskih svoystv podsistemy instrumenta i zagotovki // Izvestiya vysshih uchebnyh zavedeniy. Severo - Kavkazskiy region. Seriya: Tehnicheskie nauki. - 2011. - № 2. - S. 38 - 46.
5. Zakovorotnyy V., Flek M., Fam D. Sinergeticheskaya koncepciya pri postroenii sistem upravleniya tochnost'yu izgotovleniya detaley slozhnoy geometricheskoy formy // Vestnik Donskogo gosudarstvennogo tehnicheskogo universiteta. - 2011. - T. 11. № 10 (61). - S. 1785-1797.
6. Voronov S., Nepochatov A., Kiselev I. Krite-rii ocenki ustoychivosti processa frezerovaniya nezhestkih detaley // Izv. VUZov. Mashinostroenie. - 2011. - № 1 (610). - S. 50 - 62.
7. Zakovorotnyy V.L. Upravlyaemaya evolyuciya dinamicheskoy sistemy, vzaimodeystvuyuschey so sredoy // Izvestiya YuFU. Tehnicheskie nauki. - 2006. - № 6 (61). - S. 84-103.
8. Zakovorotnyy V., Fam D. Perestroyka dinamicheskoy sistemy, vzaimodeystvuyuschey s processom rezaniya, v hode ee evolyucii // Izvestiya YuFU. Tehnicheskie nauki. - 2011. - № 6 (119). - S. 49-61.
9. Zakovorotnyy V., Ladnik I. Postroenie informacionnoy modeli dinamicheskoy sistemy metallorezhuschego stanka dlya diagnostiki processa obrabotki// Problemy mashinostroeniya i nadezhnosti mashin. - 1991. - № 4. - S. 75.
