employee
Russian Federation
Russian Federation
The results of a study of the machinability of titanium alloy VT1-0 are presented. The influence of the wear-resistant coating of the cutting tool on the cutting forces is analyzed. It is shown that when turning with a cutting tool without a wear-resistant coating, the cutting forces and friction force are lower than when turning with a tool with a coating. Based on the applied Taguchi method, effective cutting conditions were selected, at which maximum productivity is achieved
friction, cutting forces, titanium alloy, turning, Taguchi method
1. URL: https://viam.ru/review/5202
2. Geetha, M., Singh, A. K., Asokamani, R., Gogia, A. K. Ti based biomaterials, the ultimate choice for orthopaedic implants - A review // Progress in Materials Science. - 2009. No. 54 (3). P. 397-425.
3. Giacaglia, G. E. O., Lamas, W. de Q. Pedicle screw rupture: A case study // Case Studies in Engineering Failure Analysis. - 2015. No. 4. P.64-75.
4. Abbas, A.T., Sharma, N., Anwar, S., Luqman, M. et al. Multi-response optimization in high-speed machining of Ti-6Al-4V using TOPSIS-fuzzy integrated approach. Materials (Basel), - 2020. - 1104 P.
5. Savilov, A.V., Timofeev, S.A., Svinin, V.M. Investigation of Output Parameters of Titanium Reverse Turning / A. V. Savilov, V. M. Svinin, S. A. // Journal of Physics: Conference Series : International Conference Information Technologies in Business and Industry 2018 - Enterprise Information Systems, Tomsk, January 17-20, 2018. - Tomsk: Institute of Physics Publishing, 2018. - P. 042055.
6. Surya, M.S., Prasanthi, G., Kumar, A.K. et al. Optimization of cutting parameters while turning Ti-6Al-4 V using response surface methodology and machine learning technique // Int. J. Interact. Des. Manuf. (IJIDeM). - 2021. No. 15 (4), P. 453-462.
7. Pramanik, A., Guy, L. Machining of Titanium Alloy (Ti-6Al-4V) -Theory to Application // Machining Science and Technology. - 2015. No. 19 (1), P. 1-49.
8. Kivak, T. Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts // Measurement: Journal of the International Measurement Confederation. - 2014. No. 50(1), P. 19-28.
9. Altintas, Y. Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design. 2nd ed. Cambridge: Cambridge University Press, 2012. - 380 P.
10. Selivanov, A. N., Nasad, T. G., Tormanov, S. Y. Data experimental research of process swaft formation in time cutting titanium alloy vt 1-0 by methods high speed circular milling // Vestnik SGTU. - 2011. No. 2 (56). P. 138-144.
