SELECTING END MILLS FOR PROCESSING DIRECTED-CHARTED MATERIALS
Authors:
1.
Bryansk State Technical University
(Professor, Pro-rector for Promising Development)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
2.
Komsomolsk-upon-Amur State University
(Associate Professor)
Komsomol'sk-na-Amure, Russian Federation
Komsomol'sk-na-Amure, Russian Federation
4.
Far Eastern Federal University
5.
Bryansk State Technical University
(Department of Metal Cutting Machines and Tools, Senior Lecturer)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
Type:
Сonference article
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 55.13 Технология машиностроения
GRNTI 55.13 Технология машиностроения
Language:
Russian
Keywords:
surfacing, static-pulse processing, wear, end mills, speed, feed, acoustic emission, signal
Abstract (English):
A comparative study of the wear resistance of hard-alloy end mills during processing of surfaced and hardened (capped) deformation waves in the process of static-pulse processing of materials is performed.
A comparative study of the wear resistance of hard-alloy end mills during processing of surfaced and hardened (capped) deformation waves in the process of static-pulse processing of materials is performed.
Keywords:
surfacing, static-pulse processing, wear, end mills, speed, feed, acoustic emission, signal
surfacing, static-pulse processing, wear, end mills, speed, feed, acoustic emission, signal
1. Kirichek A.V., Lazutkin A. G., Soloviev D. L. Static-pulse processing and equipment for its implementation / / STIN. 1999. No. 6. Pp. 20-24.
2. Kirichek A.V., Solovyov D. L. Influence of pre-static loading on microhardness / / Accuracy of technological and transport systems: Materials of international relations. scientific.- tech. Conf. Penza: 1998. Part 2. Pp. 108-111.
3. Hardening of heavy-loaded parts by static-pulse PDP / D. L. Solovyov et al. / / STEEN. 2002. No. 5 p. 13-15.
4. Mokritsky B. Y. Acoustic emission as a means of evaluation and prediction of properties of cutting tool materials]// Vestnik mashinostroeniya. No. 10, 2010, pp. 76-78.
5. GOST R ISO 12716-2009 non-destructive Testing.
