graduate student
Bryansk, Bryansk, Russian Federation
graduate student
Bryansk, Bryansk, Russian Federation
graduate student
Bryansk, Moscow, Russian Federation
graduate student
Bryansk, Bryansk, Russian Federation
graduate student
Bryansk, Bryansk, Russian Federation
UDC 629.4.015
Russian Library and Bibliographic Classification 392
Traction asynchronous electric motors (TAEM) have a key place among locomotive electric drives, ensuring the reliability and efficiency of railway transportation. During TAEM operation, their insulation materials can be exposed to various influences, which lead to aging, degradation and, eventually, to possible emergency situations. In this regard, the assessment of the insulation condition of the rods of the traction asynchronous electric motor of a locomotive with different sections of the rotor windings is an urgent task. A study of the condition of TAEM insulation coatings and the determination of their service life depending on various shapes of the rotor windings based on the method of temperature distribution in the windings is carried out. It is found out that the lowest heating temperatures of the rotor windings are fixed with a trapezoidal section of the stator windings, which results in less wear of TAEM insulating coatings during operation.
motor, insulation, winding, rotor, rod, heat transfer
1. Usoltsev AA. Frequency control of asynchronous motors: textbook. St. Petersburg: St. Petersburg State University of ITMO; 2006.
2. Aliev II. Asynchronous motors in three–phase and single–phase modes. Moscow: IP RadioSoft; 2004.
3. Kopylov IP. Design of electric machines: textbook for universities [Internet]. 4th ed. Moscow: Yurait Publishing House; 2025 [cited 2025 Febr 02]. Available from: https://urait.ru/bcode/566208
4. Design of electric machines. 3rd ed. Moscow: Energy; 1970.
5. Tikhonov PhV. Development of methods to select the parameters of an asynchronous traction motor, taking into account the thermal state of the windings [dissertation]. [Moscow (RF)]; 2008.
6. Zabudsky EI. Electric machines. Asynchronous machines: textbook for universities. Moscow: Megapolis; 2017.
7. Zyuzev AM, Metelkov VP. Evaluation of the heating of the asynchronous motor stator winding in an electric drive with periodic loading. ES and K [Internet]. 2010[cited 2025 Febr 12];1. Available from: https://cyberleninka.ru/article/n/otsenka-nagreva-obmotki-statora-asinhronnogo-dvigatelya-v-elektroprivode-s-periodicheskim-harakterom-nagruzheniya
8. Fedorova KG. Overview of existing thermal models for a frequency-controlled asynchronous electric motor. Glavny Energetik. 2018;7.
9. Galushko VN, Evdasev IS, Patskevich VA, Drabov AV. Calculation of asynchronous motors: textbook for coursework. Gomel: BelGUT; 2016.
10. Kopylov IP. Design of electric machines. Moscow: Energiya; 1980.
