employee
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
employee
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
employee
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
graduate student
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
graduate student
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
VAC 2.5.5 Технология и оборудование механической и физико-технической обработки
UDK 621.9 Обработка резанием (снятием стружки).Резка (разделительные операции без образования стружки).Дробление и измельчение.Обработка листового материала.Изготовление резьбы и т.д. Способы (технология), инструменты, машины и приспособления
UDK 621.91.01 Теория и основы обработки резанием (снятием стружки), обрабатываемость, влияющие факторы и т.д.
BBK 345 Общая технология машиностроения. Обработка металлов
The study objective is to increase the durability period of replaceable carbide inserts by applying coatings for turning hard-to-machine stainless steels. Research results: recommendations are made on the choice of a rational coating of a metal-cutting tool, depending on its operating conditions. Conclusions: The developed coatings allow to increase the durability period of the cutting tool up to 3 times. The paper discusses the results of applying the newly developed coatings on the hard-alloy material of VK8 brand. The analysis is done for turning stainless steels of 09X17N7YU, 12X18N10T, 13X15N5AM-3 grades. The most rational coatings are found, which make it possible to increase the durability period of the metal-cutting tool up to 3 times.
design, tools, wear resistance, coating, forecasting, period, modeling, process, cutting
1. Krivoruchko DV, Zaloga VA. Modeling of cutting processes by finite element method: methodological foundations: monograph. Sumy: Universitetskaya Kniga; 2012.
2. Petrushin SI. Chip formation with a developed zone of plastic deformation during metal cutting. Bulletin of the Tomsk Polytechnic University. 2009;314(2):62.
3. Petrushin SI. Generation of geometry fundamentals by cutting blade tools. Tomsk: TPU Publishing House;2004.
4. Bezylagny VF. Similarity method in mechanical engineering technology. Moscow: Mashinostroenie; 2012.
5. Grigoriev SN, Tabakov VP, Volosova MA. Technological methods of increasing the wear resistance of contact pads of cutting tools: monograph. Stary Oskol: TNT; 2011.
6. Vereschaka AA, Vereschaka AS, Batako AD, Aksenenko AYu, Sitnikov NN. Improvement of structure and quality of nanoscale multilayered composite coatings, deposited by filtered cathodic vacuum arc deposition method. Nanomaterials and Nanotechnology 2017;7:1-13. DOI:https://doi.org/10.1177/1847980416680805 journals.sagepub.com/home/nax. SAGE.
7. Migranov M, Migranova R. Tool coatings with the effect of adaptation to cutting conditions. Key Engineering Materials. 2012;496:75-79.
8. Vereschaka AA, Migranov MS. Study of wear resistance of sintered powder tool materials. Advanced Materials Research. 2014;871:159-163.
9. Grigoriev S, Vereschaka A, Milovich F, Tabakov V, Sitnikov N, Andreev N, Sviridova T, Bublikov J. Investigation of muticompontnt nanolayer coatings baseton nitrides of Cr, Mo, Zr, Nb and Al. Surface and Coating Technology. 2020;401(126258). DOI:https://doi.org/10.3390/coatings10121236.
10. Vereschaka AA, Grigoriev SN, Naumov AG, Sotova ES, Kirilov AK, Bublikov JI. Nanoscale multilayered composite coating - applikations for ecomashining. In: Handbook of modern Coating Technologies: Applikations and Development. 1st ed. 2021. ISBN:9780444632371.
11. Vereschaka AA, Grigoriev SN, Sitnikov NN, Bataka A. Delamination and Iongitudinal cracking in multi-layered composite nano-structured coating and their influence on cutting tool life. Wear. 2017;390-391:209-219. DOI:https://doi.org/10.1016/j.wear.2017.07.021.
12. Tabakov VP, Chikhranov AV. Improving the performance of a carbide tool by directional selection of rational parameters of the composition of a wear-resistant coating. Machines and tools. 2016;3:14-18.
13. Tabakov VP, Smirnov MYu, Tsikin AV, Chikhranov AV. Mathematical description of crack formation processes in wear-resistant coatings of cutting tools. Hardening technologies and coatings. 2007;6:48-51.
14. Colding B. War characteristics of coated carbide. International Cutting Tool Bay Sandviken, Lecture. 1969;5:1.
15. Horlin HA. TiC coated cemented carbides - their introduction and impact on metal cutting. Product Engineering. 1971;50(4,5):153-159. DOI:https://doi.org/10.1049/tpe:19710023.
16. Lin Z, Wang L, Zhan J, Mao HK, Zhao Y. Nanocrustalline tungsten carbide: As incompressible as diamond. Applied Physics Letters. 2009. 95. 211906.
