Moscow, Moscow, Russian Federation
student
Russian Federation
UDK 620.178.16 Испытания на износ
UDK 620.186 Микроскопические исследования. Микроанализ. Изучение структуры
The results of structural and tribological studies of steels and alloys of pearlite, martensitic and austenitic classes using dif-ferent types of pretreatment and nitriding modes are presented. The results of tribological tests and metallophysical studies made it possible to evaluate the effectiveness of each of used treatment methods and to identify the characteristics of the structural state of the nitrided layer, contributing to an increase in the operational properties of steels in friction and wear conditions. A comprehensive physical and mechanical criterion has been developed to evaluate friction components nitrid-ing efficiency.
structural materials, steels and alloys, nitriding, structure, surface layers, wear resistance, operational properties
1. Kostetsky B.I., Nosovsky I.G., Karaulov A.G. Poverhnostnaya prochnost' metallov pri trenii [Surface strength of metals under friction]. Under the general editorship of B.I. Kostetsky. Kiev: Technika, 1976, 292 p. (in Russian).
2. Gerasimov S.A., Kuksenova L.I., Lapteva V.G., Ospennikova O.G., Alekseeva M.S., Gromov V.I. Surface engineering and operational properties of nitrided structural steels. Under the general editorship of E.N. Kablov. Mos-cow: VIAM, 2019. 600 p.
3. Zinchenko V.M. Inzheneriya poverkhnosti zub-chatykh koles metodami khimiko-termicheskoy obrabotki [Gear surface engineering by thermal-chemical treatment methods]. Moscow: Bauman Moscow State Technical University, 2001. 303 p. (in Russian).
4. Esipov R.S., Abdullin R.A., Khusainov Yu.G., Ni-kolaev A.A. Ion nitriding of high-alloy structural steels hav-ing ultrafine structure at different temperatures. Surface. X-ray, synchrotron and neutron studies, 2021, no. 10. pp. 102-107.
5. Prokofiev M.V., Petrova L.G., Belashova I.S., Bibikov P.S. The effect of stadial nitrogenization on the structure and properties of martensitic steel 13X11N2V2MF. Science intensive technologies in mechan-ical engineering, 2021, vol. 2021, no. 12(126), pp. 12-19. DOI: 10.30987/ 2223-4608-2021-12-12-19.
6. Petrova L.G., Alexandrov V.A., Vdovin V.M., De-min P.E. Improvement of operation lifetime of high-speed steel tools when nitriding with controlled nitrogen potential. Science-intensive technologies in machine-building, 2022, no. 1 (127), pp. 3-10.
7. Gerasimov S.A., Kuksenova L.I., Lapteva V.G., Fakhurtdinov R.S., Alekseeva M.S., Danilov V.D., Smirnov A.E., Gromov V.I. Improvement of mechanical properties of heat-resistant steels by activation of the nitriding pro-cess. Problems of machine building and machine reliability, 2014, no. 2, pp. 90-95.
8. Rybakova L.M., Kuksenova L.I. Physical criteria of wear resistance of metal materials in surface-active lu-bricating media // Proc. The Conference on Tribology “Ftic-tion, Lubrication and Wear - 50 years on”. London. IME, 1987. P. 419-426.
9. Savchenko V.I., Shchukin E.D. On the relationship between phenomenological and structural criteria for the operation of friction units. Trenie i iznos, 1987, no. 4, pp. 581−589. (in Russian.).
10. Tushinsky L.I., Poteryaev Yu.P. Problems of mate-rials science in tribology. Novosibirsk: NETI, 1991. 64 p.
11. Suslov A.G. The quality of the surface layer of machine parts. Moscow: Mashinostroenie, 2000, 320 p.
12. Sulima A.M., Shulov V.A., Yagodkin Yu.D. Pov-erkhnostnyy sloy i ekspluatatsionnye svoystva detaley mashin [Surface layer and service properties of machine parts] Moscow: Mashinostroenie, 188, 240 p. (in Russian).
13. Michugina M.S. Razrabotka strukturnogo sos-toyaniya azotirovannogo sloya konstruktsionnih staley, otvetstvennogo za ih iznosostoykost' dis.kand. techn. nauk [Development of the structural state of the nitrided layer of structural steels responsible for their wear resistance. Ph.D. Extended Abstract of Thesis] Moscow: MAI (State Tech-nical University), 2008, 16 p. (in Russian).
14. Kuksenova L.I., Alekseeva M.S. The influence of rough machining of structural nitrided steels on their tribo-technical characteristics. MiTOM, 2023, no. 1, pp. 10-15.
15. Drozdov Yu.N., Rybakova L.M., Litvinov I.P., Pavlik B.B., Sidorov S.A. Kinetics of fracture steel destruc-tion under friction. Friction and wear, 1989, no. 5. pp. 773-778.
16. Kuksenova L.I., Michugina M.S. Influence of oxi-dation conditions on the structure and wear resistance of layers on steel 38Kh2MYuA. MiTOM. 2008. no. 2 (632). pp. 29-34.
17. Gerasimov S.A., Kuksenova L.I., Kraposhin V.S., Lisotsky I.V., Berezina E.V., Lapteva V.G. Influence of the nanocrystalline phase of iron nitrides on the wear-resistant bone of nitrided steel 38Kh2MYuA. Ma-ter. All-Russian Scientific and Technical. conf. with international participa-tion "Machine-building technologies". M.: IMASH RAN, 2010, p. 216-218.
