SPECIFICS OF THE IMPLEMENTATION OF LASER HARDENING AND SURFACE BUILDING-UP TECHNOLOGIES ON NC-MACHINING TECHNIQUE
Authors:
1.
Bryansk State Technical University
(Department "Automated Technological Systems", Associate Professor)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
2.
Bryansk State Technical University
(kafedra "Tehnologiya mashinostroeniya", post graduate student)
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
3.
Bryansk State Technical University
(Department of Metal-cutting Machines and Tools, Postgraduate Student, Head of the Laboratory of the Department of Metal-cutting Machines and Tools)
graduate student
Bryansk, Bryansk, Russian Federation
graduate student
Bryansk, Bryansk, Russian Federation
Type:
Article
Pages:
from 34
to 40
Status:
Published
Received:
05.04.2022
Accepted:
29.04.2022
Published:
29.04.2022
Subject area:
UDK 621.791 Сварка и родственные процессы
UDK 621.9 Обработка резанием (снятием стружки).Резка (разделительные операции без образования стружки).Дробление и измельчение.Обработка листового материала.Изготовление резьбы и т.д. Способы (технология), инструменты, машины и приспособления
UDK 621.9 Обработка резанием (снятием стружки).Резка (разделительные операции без образования стружки).Дробление и измельчение.Обработка листового материала.Изготовление резьбы и т.д. Способы (технология), инструменты, машины и приспособления
Language:
Russian
Keywords:
laser building-up, additive technologies, NC-machining technique
Abstract (English):
The issues of implementation of technological operations using laser radiation on equipment with numerical control (CNC) are described. The features of the implementation of laser building-up using wire and the influence of the main technological parameters on it are discussed.
The issues of implementation of technological operations using laser radiation on equipment with numerical control (CNC) are described. The features of the implementation of laser building-up using wire and the influence of the main technological parameters on it are discussed.
Keywords:
laser building-up, additive technologies, NC-machining technique
laser building-up, additive technologies, NC-machining technique
1. Grigoryants, A.G., Shiganov, I.N., Misyurov, A.I. Tech-nological processes of laser treatment: manual for colleges / under the editorship of A.G. Grigoryants, 2nd edition, stereo-typed, Moscow: Publishing House of Bauman STU, 2006, pp. 664.
2. Potentialities in additive-substractive-strengthening techniques. / A.V. Kirichek, D.L. Solovyov, A.A. Zhirkov et. al. Bulletin of the Bryansk State Technical University, 2016, no. (52), pp. 151-160.
