Abstract and keywords
Abstract (English):
The study of structural changes in chrome CVD coatings on tool steel as a result of annealing and their effect on resid-ual stresses and adhesion of coating having steel substrate, has been considered. The results of studies of residual stresses in the chrome coating and the relative adhesion index are presented. It is shown that heating of the gas-phase coating leads to the formation of a transitive layer between the coating and the substrate, increasing their adhesion.

tool steel, cutting tools, chrome CVD coatings, annealing, adhesion strength
Publication text (PDF): Read Download

1. Kremnev, L.S., Vinogradova, L.A., Onegina, A.K., Sapronov, I.Yu. Special features of the composition, structure and properties of high-speed steels for cutting tools with ion-plasma coatings based on titanium nitride / Metal Science and Heat Treatment, 2012, No.1 (679), pp. 4-9.

2. Increasing the durability of a cutting tool by surface modification with coating of tungsten compounds in a high-frequency discharge / V.A. Alexandrov, L.G. Petrova et al. / Hardening technologies and coatings, 2018, vol. 14, No.1 (157), pp. 30-35.

3. Afanasyeva, L.E., Barabanova, I.A., Radkevich, G.V. Laser surfacing of high-speed steel / Mechanics and physics of processes on the surface and in contact of solids, parts of technological and power equipment, 2018, No. 11, pp. 53-57.

4. Alexandrov, V.A., Vdovin, V.M., Sergeeva, A.S. Wear-resistant coating formation for cutting tools / International Journal of Humanities and Natural Sciences, 2017, No. 11, pp. 85-89.

5. Syrkin V.G. CVD method. Chemical vapor-phase metallization, Moscow: Nauka, 2000, 496 p. (in Rus.).

6. Petrova, L.G., Alexandrov, V.A., Barabanov, S.I. New technologies of metallization from carbonyl com-pounds / Bulletin of the Kharkiv National Automobile and Road University, 2011, No. 54, pp. 82-86.

7. Gorovoy, A.P., Cherkasov, P.M. Heterophase nanocrystalline coatings deposited by thermal decomposition vapors of bis-arene chromium compounds, Uproch. Tekhnol. Pokr., 2005, No. 9, p. 19.

8. Alexandrov, V.D., Wrinkilov, M.V. Formation of wear resistant coatings on aluminum alloys by chromium deposition from gas-phase organometallic compounds Science intensive technologies in Mechanical Engineering, 2016, No.2 (56), pp. 34-38.

9. Ivanov, L.L. Development of technology for hardening cutting tools by deposition of pyrolytic chrome coatings: Ph. D. thesis in Engineering Science / Moscow, MADI, 1988, 242 p.

10. Yurshev, V.I., Mukatdarov, R.I., Yurshev, I.V. Surface Hardening of Tools by Depositing a Pyrolytic Chromium Carbide Coating / Metal science and heat treatment, 2015, No.2 (716), pp. 48-52.

11. Influence of nitriding on the wear resistance and adhesion of zinc coatings on steel. L.G. Petrova, P.E. Demin et al. / STIN (Russian Engineering Research), 2019, No. 3, pp. 16-19.

12. Hardening of the contact surfaces of tools made of high-speed steels with a dispersed-hardened composite chrome coating. S.Y. Zhachkin et al. / Hardening technologies and coatings, 2017, No.12 (156), pp. 572-574.

13. Belashova, I.S., Petrova, L.G. Dispersion Hardening of Amorphous Chromium Coatings by Crystallized Nano-Particles of Carbides // European Conference of Heat Treatment and 21st IFHTSE Congress. – May 2014. – Munich. – P. 505-510.

14. Yurshev, V.I., Bogodukhov, S.I., Mukatdarov, R.I., Yurshev, I.V. Structure and properties of parts with coatings after heat treatment // Metal science and heat treatment, 2017, No.10 (748), pp.15-18.

Login or Create
* Forgot password?