Omsk, Omsk, Russian Federation
employee
Omsk, Omsk, Russian Federation
employee
Omsk, Omsk, Russian Federation
VAC 05.22.01 Транспортные и транспортно-технологические системы страны, ее регионов и городов, организация производства на транспорте
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 73.31 Автомобильный транспорт
GRNTI 73.41 Промышленный транспорт
Work objective. Modernization of the excavator's working equipment design intended for islands of pipeline repair together with confirmation of its operability by checking the machine for stability, carrying out the necessary calculations of the hydraulic system. Methods. The main idea is in accessorizing the main working equipment of the excavator with a structure consisting of three teeth, which is in a body with an excavator bucket form a pickup mechanism. To confirm the operability of the proposed design, theoretical studies have been carried out aimed at determining the stability of the machine for the most dangerous design operating positions, and permissible pipe sizes have been established so that working with these sizes provides the stability of the machine. Results. A variant of improving the design of the excavator working equipment of the third size group has been developed. The equipment is intended for carrying out random repair of the pipeline by the excavator without involving other road construction equipment (for example, a pipelaying crane). The proposed design of the working body allows speeding pipeline repair by reducing the time spent on changing or relocating the equipment, which as a result reduces the cost of repair work. Conclusions. Calculations of the excavator hydraulic system have been carried out. In addition, as a result of theoretical studies, calculated dependences have been obtained, which made it possible to establish the stability coefficient of the excavator of the third size group when working with upgraded equipment and the pipeline diameter in the range of 720 ...1420 mm. As a result of the research, it was found that the proposed equipment is effective for carrying out random repairs of pipelines with diameters of 720, 1020 and 1220 mm. The stability of the machine in the most dangerous positions is being carried out. The calculation shows that when the excavator does demolition works of a pipeline with a diameter of 1420 mm, there is a danger of overturning the machine due to a decrease in the Ku coefficient below the permissible value.
excavator, pipeline repair, excavator bucket, working equipment, pickup
1. Veseluha, V. M. Opredelenie ostatochnogo resursa trub lineynoy chasti nefteprovoda na osnove diagnosticheskoy informacii o tipichnyh defektah / V. M. Veseluha, A. V. Bogdanovich // Aktual'nye voprosy mashinovedeniya. - 2017. - T. 6. - S. 226-230.
2. Transportnaya strategiya Rossiyskoy Federacii na period do 2030 goda : utv. rasporyazheniem Pravitel'stva Rossiyskoy Federacii ot 22 noyabrya 2008 goda № 1734-r. : vvedena v deystvie rasporyazheniem Pravitel'stva Rossiyskoy Federacii ot 11 iyunya 2014 goda N 1032-r.
3. Zorin, A. E. Razvitie podhodov k obsluzhivaniyu dlitel'no ekspluatiruemyh neftegazoprovodov Evropeyskogo Severa /A. E Zorin, N. E. Zorin, A. S. Chernyatin // Tehnologii i ekonomika osvoeniya. - 2018. - № 3(13). - S. 52-64.
4. Wermelinger, M. Grasping and object reorientation for autonomous construction of stone structures / M. Wermelinger, R. Johns, F. Gramazio, M. Kohler, M. Hutter // IEEE Robotics and Automation Letters. - 2021. - Vol. 6(3). - Iss. 9392354. - Rr. 5105-5112. - DOIhttps://doi.org/10.1109/LRA.2021.3070300
5. GOST RF 5264-80. Ruchnaya dugovaya svarka. Soedineniya svarnye. Osnovnye tipy, konstruktivnye elementy i razmery = Manual arc welding. Welding joints. Main types, design elements and dimensions: Mezhgosudarstvennyy standart: izd. ofic.: utv. i vved. v deystvie postanovleniem gosudarstvennym komitetom SSSR po standartam ot 24.07.1980 № 3827: vved. vpervye: data vved. 1981-07-01 / Moskva: Standartinform, 2010. - 35 s.
6. Letopolsky, A. B. Working equipment of the single-bucket excavator for the development of frozen ground / A. B. Letopolsky, P. A. Korchagin, I. A. Teterina // IOP Conference Series: Mechanical Engineering and Materials Science (ICMTMTE 2019). - 2020. - R. 044027. - DOI:https://doi.org/10.1088/1757-899X/709/4/044027.
7. Trenogin, E. O. Patentnoe issledovanie vozmozhnyh konstrukciy rabochego oborudovaniya odnokovshovogo ekskavatora / E. O. Trenogin, S. I. Vahrushev // Sovremennye tehnologii v stroitel'stve. Teoriya i praktika. - 2016. - T. 2. - S. 303-311.
8. Suryo, S. H. Optimization of bucket tooth excavator design using topology optimization and finite element method / S. H. Suryo, R. S. Sastra // Journal of Physics: Conference Series. - 2021. - Vol. 1858(1). - R. 012081. - DOIhttps://doi.org/10.1088/17426596/1858/1/012081.
9. Pobegaylo, P. A. O proporciyah rabochego oborudovaniya odnokovshovyh gidravlicheskih ekskavatorov / P. A. Pobegaylo // Gornyy informacionno-analiticheskiy byulleten'. - 2015. - № 2. - S. 143-147.
10. Zenkov, S. A. Method of defining rational parameters for excavator buckets vibrating devices in order to reduce soil adhesion / S. A. Zenkov // IOP Conf. Series: Earth and Environmental Science. - 2017. - Vol. 87. - P. 082057. - DOI:https://doi.org/10.1088/1755-1315/87/8/0820572017
11. Kuleshov, A. V. Optimizaciya metallokonstrukciy ispolnitel'nogo organa gidravlicheskogo ekskavatora v srede SAPR / A. V. Kuleshov, V. A. Slepchenko, I.V . Slepchenko // Vestnik Tomskogo gosudarstvennogo arhitekturno-stroitel'nogo universiteta. - 2017. - № 2 (61). - S. 204-210.
12. Teterina, I. A. Investigation of soil destruction by trench chain excavator cutting element process / I. A. Teterina, P. A. Korchagin, A. B. Letopolsky // Lecture Notes in Mechanical Engineering. 2019. Pp. 2123-2132. DOI:https://doi.org/10.1007/978-3-319-95630-5_229
13. Troshin, D. I. Povyshenie effektivnosti kovshey ekskavatorov. /D. I. Troshin, V. A. Nikolaev // Stroitel'nye i dorozhnye mashiny. - 2019. - № 11. - S. 22-25.
14. Lukashuk, O. N. Operation of single-bucket excavator transmission system / O. N. Lukashuk, A. P. Komissarov, K. Yu. Letnev // IOP Conf. Series: Materials Science and Engineering. 2018. Volume 323(1). P. 012016. DOIhttps://doi.org/10.1088/1757-899X/323/1/012016.
15. Unaspekov, B. A. Razrabotka innovacionnogo oborudovaniya i puti ee ispol'zovaniya v tehnike i tehnologii mashinostroeniya / B. A. Unaspekov, G. M. Abdukalikova, L. A. Sivachenko // Sovremennye problemy teorii mashin. - 2017. - № 5. - S. 101-105.
