DESIGN OF PARTS TAKING INTO ACCOUNT THE THREE-DIMENSIONAL TECHNOLOGY OF THEIR MANUFACTURE
Abstract and keywords
Abstract (English):
The paper studies the issues of the development of parts and assemblies taking into account the technology of three-dimensional printing. The analysis of the identification of design parameters and three-dimensional printing device parameters for obtaining a finished product of the required dimensions and strength is carried out.

Keywords:
additive technologies, 3D printing, instrumentation, design
Text
Publication text (PDF): Read Download
References

1. Valetov, V.A. Additive technologies (state and pros-pects), study guide, St. Petersburg: ITMO University, 2015, 63 p.

2. Yablochnikov, E. I., Pirogov, A.V., Vasilkov, S. D., Vosorkin, A. S., Kushnarenko, A. A. Principles of designing injection molds for the production of pilot series of optical devices made of thermo-plastic polymer materials // Modern Mechanical engineering. Science and education, 2013, no. 3, p. 409-418.

3. Yablochnikov, E.I., Pirogov, A.V., Gribovsky, A.A. Joint application of additive technologies and virtual modeling systems in the preparation of polymer products production // News of higher educational institutions. Instrumentation, 2014,Vol. 57, no. 5, p. 72-76.

4. Medvedev, M. P., Fomina, M. A. 3D printing as a new era in medicine, New science: from idea to result, 2016, no. 11-4, p. 16-19.

5. Bobtsova, S. V., Valetov, V. A. Possibilities of using rapid prototyping technologies in instrument engineering , Scientific and Technical Bulletin of information Technologies, Mechanics and Optics, 2001, no. 3, p. 97-103.

6. Kondrashov, S. V., Pykhtin, A. A., Larionov, S. A., So-rokin, A. E. The influence of technological modes of FDM printing and the composition of the materials used on the physical and mechanical characteristics of FDM models (review) // Proceedings of VIAM, no.10 (82), 2019, p. 36-49.

7. Tymrak, B.M., Kreiger, M., Pearce, J. Materials and De-sign; Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental condi-tions // Materials and Design. - 2014. - Vol. 58. - PP. 242-246.

8. Avtushenko, A. A., Anamova, R. R., Ivanov, A. O., Ri-petsky, A.V., Osipov, A.V. Methods of using additive technologies at the stages of manufacturing prototypes of aircraft units and components // Bulletin of the Bryansk State Technical University., 2015, Issue 46, p. 8-16.

9. Izmailov, D. V., Bodrov, K. Yu., Tolstoba, N. D. Selec-tion of parameters of an optical system and approaches to the development of software for a complex of technical vision for three-dimensional printing // Scientific and Technical Bulletin of information technologies, mechanics and Optics, 2018, Vol. 18. no. 6 , p. 946-953.

10. Ivashkova, K. P., Filippov, A. N., Kopasov, E. A. Analysis and systematization of 3D printing defects , News of higher educational institutions. Instrumentation, 2017, Vol. 60, no. 5, p. 426-430.

11. Kamonichkina, N. V., Kocheshkov, I. V. Investigation of the strength characteristics of a model material obtained by the FDM-printing method // Additive technologies, 2018, no. 3, p. 39-41.

12. Saitgalina, A.K., Tolstoba, N.D., Mitiushkin, A.V. De-velopment of methods for accurate modeling of optical equip-ment for three-dimensional printing // Proceedings of SPIE, 2016, Vol. 9947, p. 994715.

13. Saitgalina, A., Mityushkin, A., Tolstoba, N.D. Research of limits of applicability of an open-source equipment for development the optical equipment kit // Proceedings of SPIE, 2016, Vol. 9889, p. 98891W.

14. GOST R 57558-2-017. Additive technological processes. Basic principles.

15. Casavola, C., Cazzato, A., Moramarco, V., Pappalettere, C. Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory // Materials & Design, 2016. Vol. 90, PP. 453-458.

16. GLOBATEK3D [Electronic resource]: What is the support material in 3D printing / Globatek JSC. Moscow: Globatek JSC. URL: http://3d.globatek.ru/world3d/support_material/. (accessed 22.06.2021).

17. 3D NetPrint [Electronic resource]: Supporting structures for FDM 3D printing / 3D NetPrint. Moscow: 3D NetPrint. URL:https://3dnetprint.ru/support-stucture-material-in-3d-print/. (accessed 22.06.2021.)

18. Orlov, P.I. Fundamentals of design: A reference manual. - M.: Mechanical Engineering, 1998, 560 p.

19. Zlenko, M.A., Nagaytsev, M.V., Dovbysh, V.M. Additive technologies in mechanical engineering. - M.: SSC "NAMI", 2015, 220 p.

20. Burns, M. Automated Fabrication. - USA: Prentice Hall, 1993, p. 369.

Login or Create
* Forgot password?