Moscow, Moscow, Russian Federation
The existing approaches for determining and evaluating the sealing properties of seals for fixed sealants, as well as methods of leakage monitoring are considered. The description of a normalized method for leak-tightness assessment is given, which allows solving a sufficiently large number of evaluation tasks, for example, technological task: assessment of the influence of the technology sealing surfaced job; design: assessment of the influence of the seals surface layer quality of sealants and geometric parameters of them on sealing capacity (service property).
service property, sealing capacity, determining sealing property (sealing ability) of seals of sealants, assessment of the influence of sealing surfaced job technology
1. The quality of the machines: Reference. In 2 volumes , Edited by A. G. Suslov, M.: Mashinostroenie, 1995, Vol. 1, 253 p.
2. GOST 9544-2015 " Pipeline fittings. Standards of gate sealability".
3. Tikhomirov, V. P., Gorlenko, O. A. Criterion of tight-ness of flat interfaces / / Friction and wear, 1989, Vol. 10, no. 2, pp. 214-218.
4. Drobotov, Yu. B., Greshnikov, V. A., Bachegov, V. N. Acoustic contacts of leak detection. M.: Mashinostroenie, 1989, 120 p.
5. Technology of manufacturing, assembly and testing of sealing devices in a car industry, N. N. Ilyin, V. A. Nikolaev, et al, M.: MAI, 1984, 109 p.
6. Technological diagnostics of hydraulic drives / Edited by T. M. Bashta, M.: Mashinostroenie, 1989, 263 p.
7. Eremenkova, I. V. Technological provision of hermetic state of fixed detachable joints according to a two-stage scheme of production organization , High-tech technologies in mechanical engineering, 2021, no. 1 (115), pp. 24-33.
8. Mechanical engineering. Encyclopedia. Reliability of machines. Vol. IV 3 , V. V. Klyuev, V. V. Bolotin, F. R. Sos-nin, et al, edited by V. V. Klyuev, M.: Mashinostroenie, 1998, 592 p.
9. Seals and sealing equipment: Reference , L. A. Konda-kov, A. I. Golubev, V. B. Ovander, et al, edited by A. I. Golubev and L. A. Kondakov, M.: Mashinostroenie, 1986, 463 p.
