Moscow, Moscow, Russian Federation
A technology for the solution of the problem in ensuring impermeability of fixed split metal joints at two-stage circuit of the design-technological organization in pre-production is carried out. The technology for impermeability support is based on the defined theoretical and empirical dependences of impermeability upon design factors and quality of sealing surfaces; upon table data obtained on potentialities of the processing methods in quality parameter assurance of the surfaces in sealing joints made of corrosion-resistance 08H18H10T steel, and also obtained empirical dependences of surface layer quality parameters upon processing modes.
operation property, design-technological pre-production, technology for impermeability support, impermeability, technological support, surface layer quality in machinery
1. Machine Quality: Reference Book. In 2 Vol., Vol1. / under the editorship of A.G. Suslov. - M.: Mechanical Engineering, 1995. - pp. 253.
2. Ryzhov, E.V., Suslov, A.G., Fyodorov, V.P. Technological Support of Machinery Operation Properties. - M.: Mechanical Engineering, 1979. - pp. 173.
3. Suslov, A.G. Technological Support of State Parameters in Parts Surface Layer. - M.: Mechanical Engineering, 1987. - pp. 203.
4. Suslov, A.G., Dalsky, A.M. Scientific Fundamentals of Engineering Techniques. - M.: Mechanical Engineering, 2002. - pp. 684.
5. Dalsky, A.M., Suslov, A.G., Nazarov, Yu.F. Technology of Machinery Manufacturing. Vol.3 / under the general editorship of A.G. Suslov. - 2000. - pp. 840.
6. Uginchus, A.A. Hydraulics and Hydraulic Machines: 4-th edition revised and supplemented. - Kharkov: Kharkov University, 1970. - pp. 394.
7. Pinchuk, L.S. Hermetology. Minsk: Science and Engi-neering, 1992. - pp. 216.
8. Karmugin, B.V., Stratinevsky, G.G., Mendelson, D.A. Valve Sealing of Pneumatic Hydrounits - M.: Mechanical Engineering, 1983. - pp. 151.
9. Suslov, A.G., Yeryomenkova, I.V. Normalized method for impermeability definition in fixed joints // Control. Diag-nostics. - 2006. - No. 2. - pp. 12-16.
10. Golub, V.M. Increase of wear-resistance and impermeability in contact rings of friction couples of face sealing / Author’s Abstract for Can. Sc. Tech. degree - Gomel: GNU of “Bely Institute of Mechanics and Metal Polymeric Systems”, 2000. - pp. 22.
11. Suslov, A.G. Machinery Surface Layer Quality. - M.: Mechanical Engineering, 2000. - pp. 320.4. Bishutin, S.G. Parts Surface Layer Structuring at Finish Abrasion. - Bryansk: BSTU, 2009. - pp. 100.
12. Suslov, A.G., Gorlenko, O.A. Experimental and Statis-tical Method to Ensure Machine Surface Quality. - M.: Me-chanical Engineering 1, 2003. - pp. 302.
13. Yeryomenkova, I.V. Technological support of impermeability in fixed split joints through two-stage circuit of production organization // Science Intensive Technologies in Mechanical Engineering. - 2012. - No. 1(115). - pp. 24-33.
14. Suslov, A.G. Technological Support of Contact Stiff-ness in Joints. - M.: Science, 1977. - pp. 100.
