Journals Conference proceedings News
Authors
Bulletin of BSTU Transport engineering Science intensive technologies in mechanical engineering Automation and modeling in design and management Ergodesign
Rubrics
Submit manuscript
Design of stamping equipment for manufacturing axisymmetric parts with end bulges and their use
Submit manuscript Download PDF
Text
To cite
Citations:

DESIGN OF STAMPING EQUIPMENT FOR MANUFACTURING AXISYMMETRIC PARTS WITH END BULGES AND THEIR USE
UDK 62 Инженерное дело. Техника в целом. Транспорт
Panfilov Gennadiy 1
Do An 2
Le Min 3
Authors:
1.  Tula State University (kafedra «Mehanika plasticheskogo fo moizmeneniya», Prof.)

Tula, Tula, Russian Federation
2.  Tula State University (Post graduate student)

Tula, Tula, Russian Federation
3.  Hanoi Research Institute (Engineer-Explorer)

Hanoi, Vietnam
Type:
Article
DOI:
https://doi.org/10.30987/2223-4608-2021-3-7-15
Pages:
from 7 to 15
Status:
Published
Received:
14.02.2021
Accepted:
20.03.2021
Published:
20.03.2021
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
axisymmetric parts with end bulges; stamping equipment; split semi-matrices; parts with collet sectors
Abstract and keywords
Abstract (English):
Designed special stamping equipment for the double-sided heading of axisymmetric parts with end bulges is shown, and also there are developed original designs of devices having parts mentioned.

Keywords:
axisymmetric parts with end bulges; stamping equipment; split semi-matrices; parts with collet sectors
Text
Text (PDF): Read Download
References

1. GOST 16514-96. Volumetric Hydraulic Drives. Hydrau-lic Cylinders. General Technical Requirements. M.: “Standard Publishers” IPK, 2001. - pp. 5.

2. GOST 34252-2017 (ISO 15783:2002). Hermetic Centri-fugal Pumps. Technical Requirements. Class II. M.: “Standar-dinform” IPK, 2018. - pp. 49.

3. A.C. 564384 the RF. Pile Diesel Hammer // V.I. Telov, S.G. Fomenko, A.S. Odintsov: Obrastsov IERT. - application number: 2190421/33. - applied: 18.11.1975. - published: 05.07.1977. Bull. 25. - pp. 5.

4. Pat. RU 2164981. Diesel Hammer // K.A. Avdeev, M.V. Maliovanov; TulaSU; application number: 99126229/03. - applied: 15.12.1999. - published: 10.04.2001. - Bull. No.10. pp. 13.

5. Pat. RU 2393295. Free-piston Diesel-Hammer // E.N. Yeryomenko; E.N. Yeryomenko; application number: 2009111625/03. - applied: 30.03.2009. - published: 27.06.2010. - Bull. No.18. pp. 7.

6. Pat. RU 2517290. Hydraulic Hammer. // S.G. Fomenko, O.K. Adamova, A.A. Tarasov et al.; FBI “3 CRI DM RF”. Application number: 2012145050/03. - applied: 24.10.2012. - published: 27.05.2014. - Bull. No.15. pp. 10.

7. Pat. RU 2104148. Hydraulic Hammer (Versions) // La-vrentiev Institute of Hydrodynamics; application number: 95104636/28. - applied: 28.03.1995. - published: 10.02.1998. - Bull. 4. pp. 14.

8. Pat. RU 2333316. Hydraulic Hammer // P.A. Zakharov, A.G. Bogachenkov, V.M. Yermolaev; PC “ROPAT PLUS”. - Application number: 2006143500/03. - applied: 07.12.2006. - published: 10.09.2008. - Bull. No.25. pp. 5.

9. Pat. RU 2333317. Hydraulic Hammer // V.A. Kuvshi-nov, V.M. Yermolaev; PC “ROPAT PLUS”. - Application number. - 01.02.2006. - published: 10.09.2008. - Bull. No.25. pp. 7.

10. Pat. Ru 2149956. Pneumatic Device for Driving Long Parts, for Example, Pipes into Ground // H.M. Tkach, A.Ya. Tishkov, L.I. Gendlina et al.; Mining Institute of SB of the RAS. - applied: 24.03.1999. - published: 27.05.2000. - Bull. No.15. pp. 11.

11. Pat. RO 2440460. Air Percussion Machine for Driving Tools into Ground // P.N. Tambovtsev; Mining Institute SB of the RAS. - applied: 28.06.2010. - published: 20.01.2012. - Bull. No.2. pp.9.

12. Pat. RU 2276229. Air-percussion Machine for Driving Bars into Ground // P.N. Tambovtsev, A.Ya. Tishkov: Mining Institute SB of the RAS. - applied: 14.12.2004. - published: 10.05.2006. - Bull. No.13. pp. 7.

13. A.C. 548350 RF. Die for End Bulge Heading on Bar Billets // B.S. Tyshkovsky, V.S. Ferberova, G.V. et al. - appli-cation number: 2138997. - published: 28.02.1977. - Bull. No.8. pp. 7.

14. A.C. 1063519 RF. Method for Parts Punching // A.I. Oskolkov, M.I. Poksevatkin, A.S. Torhov et al. SPA “Al-tay RI of Technology and Mechanical Engineering”. - applied: 10.04.1982. - Published: 30.12.1983. - Bull. No.48. pp. 3.

15. Pat. RU 2010663. Pospelov’s Method for Heading Products of Bar with Head and Polygon Neck // A.L. Pospe-lov; A.L. Pospelov. - Application number: 4944968/27. - ap-plied: 14.06.1991. - published: 15.04.1994. - Bull. No.11. pp. 4.

16. Pat. RU 2016691. Method of Heading Parts with Right Slot of Head // N.I. Maximov; N.I. Maximov; application number: 5060523/27. - applied: 28.09.1992. - published: 30.97.1994. - Bull. No.22.pp.7.

17. Pat. RU 2053087. Device for Heading Bulges on Cylindrical Parts // D.V. Khvan, O.V. Soloviyov, E.V. Peshkov et al.; Voronezh Polytechnic Institute; application number 4945176/08. - applied. 13.06.1991. - published: 27.01.1996. - Bull. No.3. pp. 4.

18. Pat. RU 2056206. Die Forming of Bars with Flange // L.S. Temyanko, A.F. Mishin, Yu.P. Auchenkov et al.; PC “GAS”. - Application number: 94026832/08. - applied: 18. 07.1994. - published: 20.03.1996. - Bull. No.6. pp. 9.

19. Pat. RU 2092267. Method for Manufacturing Bar Fasteners with Head // V.Ya. Gerasimov, N.V. Paryshev, V.P. Egy; Company “KurganSteelbridge”; Application number: 96103406/02. - applied: 16.12.1996. - published: 10.10.1997. - Bull. No.28. pp. 3.

20. Pat. RU 2168386. Method for Heading Embedded Bolts with Head with Radial Extensions, Device for Preliminary Extension Shaping, Device for Final Extension Shaping // E.N. Khokhlov, A.D. Kartashov; E.N. Khokhlov, A.D. Kartashov; Application number: 99120925/02. - applied: 01.10.1999. - published: 10.06.2001. - Bull. No.16. pp. 13.

21. Pat. RU 2336143. Method for Manufacturing Bar Products with Head and Tapered Area of Bar // S.V. Adamchuk, V.L. Trachtenherz, V.I. Artyukhin et al.; PC “Magnitogorsk Hardware-Calibration Plant “MMK-METIZ”. - Application number: 20007120734/02. - applied: 05.06.2007. - published: 20.10.2000. - Bull. No.29. pp. 9.

22. Pat. RU 2419505. Manufacturing Forged Pieces of Rod with Flange Type // E.I. Semyonov, O.A. Belokurov, A.A. Gudov et al.; SEI HVT Moscow State Industrial Univer-sity; Application number 2009136535/02. - applied: 05.10.2009. - published: 27.05.2011. - Bull. No.15. pp. 8.

23. Pat. RU 2596511. Method for Manufacturing Parts of Rod with Bulge Type // V.V. Devyatov; V.V. Devyatov. - Application number: 2015119337/02. - applied: 22.05.2015. - published: 10.09.2016,  Bull. No.25. pp. 3.

24. Pat. RU 2628596. Device for Die Forming Parts with Long Axle // Yu.P. Katrich, M.V. Gusev; FSAEI HE “MFTI (State University)”. Application number: 2016143419. - applied: 03.11.2016. - ppublished: 21.08.2017. - Bull. No.24. pp. 6.

25. A.C. 167130 RF. Device for Double-sided Heading Parts of Rod Type // G.P. Fuga, L.P. Ponomaryov, V.G. Vysotsky. - Application number: 817010/25-8. - applied: 28.01.1963. - published: 12.12.1964. - Bull. No.24. pp. 5.

26. A.C. 626871 RF. Die for Bulge Single-pass Heading on Rod Workpieces // B.V. Suvorov, A.G. Kapitonov; Co. m/b G-4086. - Application number: 2471191/25-27. - applied: 11.04.1977. - published: 05.10.1978. - Bull. No.37. pp. 5.

27. A.C. 640810 RF. Die for Heading Bulges on Rods // E.A. Kuzmin, B.K. Tikhomirov, L.V. Panfilyonok; DO of Technological Support “Micron”. - Application number: 2451964. - applied: 14.02.1977. - published: 05.01.1979. - Bull. No.1. pp. 5.

28. A.C. 774752 RF. Die for Double-sided Heading // Yu.S. Makazan, A.E. Odinets, F.A. Reznichenko; Zaporozhie P-K&TI MAP. - Application number: 2704899. - applied: 04.01.1979. - published: 30.10.1980. - Bull. No.40. pp. 6.

29. A.C. 774753 RF. Wedge Die for Double-sided Heading Rod Parts with Heads // A.I. Shevchenko, V.I. Podmogilny; Kramatorsk NI&PTI of Mechanical Engineering; Application number: 2720206/ 25-27. - applied: 29.01.1979. - published: 30.10.1980. - Bull. No.40. pp. 4.

30. A.C. 878403 RF. Device for Heading Bulges on Work-piece Ends of Rod Types // A.A. Rodionov, I.V. Ganzhov, N.A. Zhurin et al.; Application number: 2880141. - applied: 07.02.1980. - published: 07.11.1981. - Bull. No.41. pp.5.

31. A.C. 1224076 RF. Device for Double-sided Heading Bulges on Rod Workpieces // Yu.A. Kolobanov, A.L. Petrov, V.V. Tolmasov et al.; N-IK-TI of Tractor and Harvesting Ma-chine Engines. - Application number: 3601799. - applied: 07.04.1983. - published: 15.04.1986. - Bull. No.14. pp. 5.

32. Pat. RF 2148462. Device for Double-sided Electric Heading // L.S. Temyanko, A.F. Mishin, E.B. Krigman et al.; PC “GAS”. - Application number: 981192250/02. - applied: 21.10.1988. - published: 10.05.2000. - Bull. No.13. pp. 7.

33. A.C. 424638 RF. Method of Manufacturing Bushes with Double-sided Bulges // I.M. Zhvik, A.S. Sharov; Izhevsk Mechanical Institute. - Application number: 1891171. - ap-plied: 09.03.1973. - published: 25.04.1974. - Bull. No.12. pp. 4.

34. A.C. 893375 RF. Device for Bulge Heading on Pipe Ends // G.V. Rybin, P.D. Yugov, B.M. Avdeev et al.: Enter-prise m/b R-6837. - Application number: 2942048. - applied: 22.05. 1980. - published: 30.12.1981. - Bull. No.48. pp. 5.

35. A.C. 1183268 RF. Device for Pipe Billet Heading // V.E. Zyabrev, A.V. Kadashov, L.I. Smorodin; Enterprise m/b A-3813.  Application number: 3783312. - applied: 21.06.1984. - published: 07.10.1985. - Bull. No.37. pp. 5.

36. Pat. RU 2686503. Method for Combined Pipe End Heading // N.M. Vedernikov, L.A. Pavlov, V.A. Propp; PC “KTIAM” Chelyabinsk. - Application number. - 2018117630. - applied: 11.05.2018. - published: 29.04.2019. - Bull. No.13. pp. 13.

37. Semyonov, A.D., Nikitkin, A.S. Model of diamond abrasive disk electro-erosion profiling // New Industrial Technologies. - 2009. - No.3. - pp. 16.

38. Foteev N.K. Tool electro-erosion dressing mode com-putation for metal bind diamond disks // Diamonds and Super-hard Materials. - 1977. - Issue 1. - pp. 58.

39. Pat. 2037394. Mounting Gun // Yu.G. Goncharenko, N.S. Puzikov; SML AP MSP “Electron”. - Application num-ber 504919/28. - applied: 15.05.1992. - published: 19.06. - Bull. No.17. pp. 4.

40. Pat. 2911104. Powder Mounting Gun // N.M. Pushkin, N.V. Upirov, E.M. Aksyonov; PC “Tula Weapons Factory”. - Application number 2000119845/28. - applied: 24.07.2000. - published: 20.10.2002. - Bull. No.29. pp. 4.

© 2024 БГТУ
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?