Sankt-Peterburg, St. Petersburg, Russian Federation
The technological potentialities of laser alloying are considered for operation properties increase of supporting prisms in machine equipment. The information on techniques used is shown: methods for alloying component introduction, a lute structure, modes of laser working are presented. Test results of coatings obtained and recommendations for their use are presented.
contact strength, laser processing, wear resistance increase, technological equipment, surface strengthening
1. Menges, G., Mikaely, V., Morey, P. How to Prepare Moulds / translated from Engl. under the editorship of V.G. Duvidzon and E.L. Kalinchev. - S-Pb.: Profession, 2007. - pp. 621.
2. Iliytsky, V.B., Mikityansky, V.V., Serdyuk, L.M. Machine Devices. Design-Technological Support of Operation Properties. - M.: Mechanical Engineering, 1989. - pp. 208.
3. Grigoriyants, A.G. Fundamentals of Material Laser Processing. - M.: Mechanical Engineering, 1989. - pp. 304.
4. Suslov, A.G. Science Intensive Technologies in Mechanical Engineering / under the editorship of A.G. Suslov. - M.: Mechanical Engineering, - 2012. - pp. 528.
5. Minkevich, A.N. Metal and Alloy Chemical-Thermal Treatment. - M.: Mechanical Engineering, - 1965. - pp. 491.
6. Pat. No.74200U1 the Russian Federation, IPC F99Z 99/00 (2006.01). Installation for Multicycle Contact Loading: No. 2007127178/22: applied: 16.07.2007: published: 20.08.2008 / Govorov I.V.; applicant: SEI HVT “Bryansk State Technical University”. - pp. 11.
7. Suslov, A.G., Dalsky, A.M. Scientific Fundamentals of Engineering Technique. - M.: Mechanical Engineering, - 2002. - pp. 684.
