Kemerovo, Kemerovo, Russian Federation
GRNTI 55.01 Общие вопросы машиностроения
GRNTI 55.13 Технология машиностроения
GRNTI 55.35 Металлургическое машиностроение
The innovation technology analysis of finish-strengthening with surface plastic deformation (FS SPD) is presented. Key attention is paid to SPD static methods, the means of equipment and modes in the following areas: quality control and support of stationarity process; the processing of soft parts and crankshafts; concurrent and combined technologies; the formation of a nano-structural surface layer.
surface plastic deformation (SPD), concurrent and combined processing
1. Suslov, A.G. Technology and Tools of Finish-Strengthening of Parts with Surface Plastic Deformation: ref-erence book in 2 Vol. Vol.1 / under the general editorship of A.G. Suslov. - M.: Mechanical Engineering. - 2014. - pp. 480; Vo.2 - pp. 444.
2. Zaides, S.A. Encyclopedia of Surface Plastic Deforma-tion / under the editorship of Prof. S.A. Zaides. - Irkutsk: IRRITU Publishers. - 2015. - pp. 396.
3. Machinery Quality: reference book. In 2 Vol., Vol.2 / A.G. Suslov, Yu.V. Gulyaev, A.M. Dalsky [et al.]. - M.: Me-chanical Engineering. - 1995. - pp. 430.
4. Suslov, A.G. Science Intensive Technologies in Mechan-ical Engineering / A.G. Suslov, B.M. Bazrov, V.F. Beziya-zychny [et al.]; under the editorship of A.G. Suslov. - M.: Mechanical Engineering. 2012. - pp. 528.
5. Grigoriev, S.N. Kropotkina, E.Yu. Technological control of surface layer quality on specified law of strengthening // Strengthening Technologies and Coatings. - 2012. - No.9. - pp. 8-12.
6. Nepershin, R.I. Surface plastic deformation with sliding tool // Strengthening Technologies and Coatings. - 2010. - No.6. - pp. 19-22.
7. Parts Processing with Surface Plastic Deformation: mo-nograph / I.R. Aslanyan, A.S. Bubnov [et al.]; under the edi-torship of S.A. Zaides. - Irkutsk: IrSTU Publishers. 2014. - pp. 560.
8. Engineering Processes of Surface Plastic Deformation: monograph / V.Yu. Blyumenstein, A.V. Kirichek [et al.]; un-der the editorship of S.A. Zaides. - Irkutsk: IrSTU Publishers, 2007. - pp. 404.
9. Emeliyanov, V.N. Machinery Leveling with Surface Plastic Deformation: monograph. - Novgorod: NovSU, 1996. - pp. 127.
10. Belyaev, V.N., Tatarkin, E.Yu. Wear-resistance in parts by copper application on surfaces at running-in with hydraulic drive // Strengthening Technologies and Coatings. - 2012. - No.7. - pp. 3-6.
11. Sorokin, V.M., Tanchuk, S.S., Zotova, V.A. et al. De-vice for Shaft Cutting-Deforming Processing with Anti-friction Coatings // STIN. - 2012. - No. 9. - pp. 38-40.
12. Mukhanov, I.I. Machinery Pulse Finish-Strengthening by Ultrasonic Tool. - M.: Mechanical Engineering. 1978. - pp. 44.
13. Gileta, V.P., Asanov, V.B.,Beznedelny, A.I. Crankshaft journal processing with ultrasonic tool // New Materials and Technologies in Mechanical Engineering. - 2007. - No.7. - pp. 8-12.
14. Smelyansky, V.M. Mechanics of Parts Strengthening with Surface Plastic Deformation. - M.: Mechanical Engineer-ing, 2002. - pp. 300.
15. Blyumenstein, V.Yu., Smelyansky, V.M. Mechanics of Technological Inheritance at Stages of Machinery Processing and Operation. - M.: Mechanical Engineering, 2007. - pp. 400.
16. Markus, L.I., Smelyansky, V.M. Diamond Smoothing. - M.: RIIN Autoprom, 1971. - pp. 116.
17. Soloviyov, A.G., Lazutkin, A.G. et al. Heavy-duty Parts Strengthening by Method of Static-Pulse SPD / D.L. Soloviyov, A.G. Lazutkin, A.V. Kirichek, S.A. Silantiev // STIN. - 2002. - No.5. - pp. 13-15.
18. Kirichek, A.V., Soloviyov, D.L., Kuzmenko, A.P. De-formation shock wave use for metal nano-structuring // Science Intensive Technologies in Mechanical Engineering. - 2015. - No.8. - pp. 17-22.
19. Kuznetsov, V.P. Finishing technology of surface layer nano-structuring smoothing at engineering parts processing on multi-purpose machines // Nano-engineering. - 2014. - No.2. - pp. 86-89.
20. Klassen, N.V., Klassen, E.N., Myshlyaev, M.M., Klu-bovich, V.V., Kulak, M.M. Regular nano-structure formation with metal ball running-in and outlooks of use // The VII-th Inter. Conf. “Material and Nano-material Deformation and Destruction”. Moscow. November 7-10, 2017. Proceedings. - M.: IMET RAS. - 2017. - pp. 279-281.
21. Blyumenstein, V.Yu., Kukareko, V.A. Structural trans-formations in surface layer at processing with multi-radius deforming tool // Metal Processing. Technology. Equipment. Tools. - 2018. - Vol.20. - No.2. - pp. 75-83.
22. Tsekhanov, Yu.A., Sheikin, S.E., Karikh, D.V., Ser-gach, D.A. Strengthening with pure titanium ball bearing roll-ing of endo-prosthesis of human hip joint // Strengthening Technologies and Coatings. - 2013. - No.4. - pp. 21-23.
