Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
The paper deals with the development of a new hybrid technology – 3D laser work hardening which consists in the integration of laser shock treatment (laser work hardening) into the process of selective laser melting. The technology offered will allow obtaining an area of compressing residual stresses in a near surface layer and achieving the improvement of mechanical and fatigue properties of parts manufactured. In this paper the aluminum alloy samples were processed with laser work hardening with the use of uncommon absorbing and transparent layers (foil and glass) which are necessary for the introduction selective laser melting in a plant. Modes of laser work hardening were also investigated which may be used in the hybrid technology offered.
laser work hardening, selective laser melting, residual stress, microhardness
1. Pravednikov, I.S. Stress definition in plastic-deformed parts // Electronic Scientific Journal of Oil Gas Work. 2005. No.1. URL: http://ogbus.ru/authors/Pravednikov/Pravednikov_1.pdf
2. Bazaleeva, K.O., Khovova, O.M., Tsvetkova, E.V., Lu-kiyanov P. Structural stability study of austenitic steel obtained by selective laser melting // Photonics. 2015. - No.6 (54). - pp. 22-31.
3. Abdullahi K. Gujba, MamounMedraj. Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening // Materials. №7. 2014. P. 7925-7974.
4. Lei Zhang, Jin-Zhong Lu, Yong-Kang Zhang, Hai-Le Ma, Kai-Yu Luo, Feng-Ze Dai. Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless SteelWeldments Subjected to Cavitation // Erosion Materials. №10. 2017. P. 2957-2964.
5. Mohammad Ebrahimi, SaeidAmini, Seyed Mohammad Mahdavi. The investigation of laser shock peening effects on corrosion and hardness properties of ANSI 316L stainless steel //Additive Manufacturing. 2017. P. 1557-1565.
6. Nikola Kalentics, Eric Boillat, Patrice Peyre, Cyril Gor-ny, ChristophKenel, Christian Leinenbach, JamaspJhabvala, Roland E. Logé. 3D Laser Shock Peening - A new method for the 3D control of residual stresses in selective laser melting // Materials & Design. 2017. P. 350-356.
7. Bogdanov, A.V., Golubenko, Yu.V., Savkin, A.N. Ultra-short pulse lasers and their technological application // Science Intensive Technologies in Mechanical Engineering. - 2014. - No.3 (33). - pp. 46-48.
