Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Moscow, Russian Federation
Moscow, Russian Federation
GRNTI 55.01 Общие вопросы машиностроения
GRNTI 55.13 Технология машиностроения
GRNTI 55.35 Металлургическое машиностроение
To solve the problem of manufacturing fright cars with increased carrying capacity and reliability it is offered to use in their design a center sill with a new type of a cantilever part created on the basis of a cast part of front and back unified stops. Special requirements to the characteristics of a cast part defined a necessity to develop techniques for its manufacturing with the aid of science intensive experiments and current methods of the computer analysis. The work is devoted to the description of methods and technological developments allowing the support of manufacturing a complex and significant cast part. The design of casting technology was carried out with the use of computer simulation. To ensure high wear-resistance of a body center plate there was developed a technology of hardening with high frequency current on the basis of computations and full-scale experiments.
freight car with increased carrying capacity, center sill, front and back unified cast stops, case-hardening, computer simulation
1. Ivanov, V.V. Theory and Practice of Manufacturing Castings in Vacuum-Film Moulds. - Vladivostok: Dalnauka, 2006. - pp. 252.
2. Minaev, A.A. Notkin, E.B., Sazonov, V.A. Vacuum Molding. - M.: Mechanical Engineering, 1984. - pp. 216.
3. ASMHandbookVolume 4A: Steel Heat Treating Funda-mentals and Processes; editedby Dossett J. L., Totten G.E. ASM International, 2013. - 784 p.
4. Laser Technologies in Material Processing: Current Problems of Fundamental Investigations and Applied Devel-opments / under the editorship of V.Ya. Panchenko. - M.: Physmathlit, 2009. - pp. 664.
5. Golovin, G.F., Zamyatin, M.M. High-frequency Thermal Treatment: Problems of Metal Science and Technology. - L.: Mechanical Engineering, 1990. - pp. 239.
6. Yekh, Ya. Steel Thermal Treatment. - M.: Metallurgy, 1979. - pp. 264.
