Abstract and keywords
Abstract (English):
Current requirements to blanks manufactured by metal forming are presented. There are shown data on accuracy and surface roughness of rolled blanks. Different fracture criteria used for the analysis of press forming are analyzed. It is shown that metal tests on Eriksen should not be used for the estimate of the limiting drawing ratio.

mechanical engineering, metal processing, blank quality
Publication text (PDF): Read Download

1. Demin, V.A. Design of innovation technologies in metal forming // Science Intensive Techniques in Mechanical Engi-neering. – 2017. – No.8 (74). – pp. 3-6.

2. Allenov, M.G., Belokurov, O.A. Macrostructure fiber direction impact in steel forged pieces upon wear of products made of them // Bulletin of STANKIN MSTU. – 2016. – No.4 (39). – pp. 67-70.

3. Demin, V.A. Thick-Sheet Stamping Design Based on Technological Failures Prediction. – M.: Mechanical Engi-neering-1, 2002, - pp. 186. ISBN 5-94275-035-1

4. Vlasov, A.V. On Cocroft-Latham criterion application for failure prediction at cold die forging // Bulletin of Tula State University. Engineering Sciences. – 2017. – Edition 11. – Part.1. – pp. 46-58.

5. Demin, V.A., Romasenko, A.V., Kostylev, V.A. Hole folding for threading higher of M6 // Pre-Production in Me-chanical Engineering. – 2017. – Vol.15. – No.8. – pp. 357-360.

6. Larin, S.N., Platonov, V.I., Kuprin, E.P., Yakov-lev, S.S. (ml). Podhod k ocenke povrezhdaemosti pri deformirovanii stringernyh konstrukciy s cilindricheskimi kanalami po razlichnym teoriyam polzuchesti i povrezhdaemosti // Izvestiya Tul'skogo gosudarstvennogo universiteta. Tehnicheskie nauki. ‒ 2016. ‒ Vyp. 3. ‒ S. 3‒14.

7. Demin, V.A. Investigation of ties between limiting drawing ratio and group of steel stamping for cold forming // Proceedings of Tula State University. – 2017. – Edition 12. – Vol.2. – pp. 262-268.

8. Larin, S.N., Platonov, V.I., Kuprin, E.P., Yakovlev, S.S. (young). Approach to damageability estimate at deformation of stringer structures with cylindrical channels on different areas of creep and damageability // Proceedings of Tula State University. Engineering Sciences. – 2016. – Edition 3. – pp. 3-14.

Login or Create
* Forgot password?