EXPERIENCE IN CAD SYSTEM INTRODUCTION OF ROLLING-MILL MACHINERY AT URALSMASHZAVOD
Authors:
1.
Rossiyskiy gosudarstvennyy professional'no-pedagogicheskiy universitet
(kafedra «Avtomatizaciya proektirovaniya», zaveduyuschiy kafedroy)
Ekaterinburg, Russian Federation
Ekaterinburg, Russian Federation
Type:
Article
Pages:
from 40
to 46
Status:
Published
Received:
12.12.2017
Accepted:
13.12.2017
Published:
13.12.2017
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
English
Keywords:
CAD system; Uralsmashzavod; optimization computer programs; structural components; durability.
Abstract (English):
A chronology and a sequence of works for more than 20 years in the development of different computer program packages which have formed a basis of a future CAD system of technologies and rolling-mill equipment at the enterprise of Uralsmashzavod are presented. The descriptions of the most efficient software packages are given to solve the optimization problems in different processes of blank deformation, parameters of mechanisms and their drives, design parameters of load-bearing parts and complex units from the point of view of strength and life obtaining.
A chronology and a sequence of works for more than 20 years in the development of different computer program packages which have formed a basis of a future CAD system of technologies and rolling-mill equipment at the enterprise of Uralsmashzavod are presented. The descriptions of the most efficient software packages are given to solve the optimization problems in different processes of blank deformation, parameters of mechanisms and their drives, design parameters of load-bearing parts and complex units from the point of view of strength and life obtaining.
Keywords:
CAD system; Uralsmashzavod; optimization computer programs; structural components; durability.
CAD system; Uralsmashzavod; optimization computer programs; structural components; durability.
1. Polyakov, B.N. Quality Increase in Technologies, Structure Load-carrying Capacity, Equipment Life and Efficiency of Rolling Mill Automated Systems. - S-Pb.: “Renome”, 2006. pp. 528.
2. Statistical Analysis and Blooming Mill Mathematical Modeling / S.L. Kotsar, B.N. Polyakov, Yu.D. Makarov, V.A. Chichigin. M.: Metallurgy, 1974. pp. 280.
3. Polyakov, B.N. Statistical Methods in Algorithms and Examples (from practice of rolling-mill production): manual - S-Pb.: “Renome”, 2007. pp. 182.
