Fryazino, Moscow, Russian Federation
Fryazino, Moscow, Russian Federation
Moskva, Russian Federation
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
As a result of the experimental investigations carried out on the dimension processing of carbon plastic of 3mm thick with the matrix on the basis of epoxy resin by continuous emission of the fiber ytterbium laser with λ=1.06 mkm of the wave length there are defined basic technological parameters ensuring high quality and processing speed. A comparative investigation of the processing method impact upon mechanical strength of samples investigated in accordance with RSS 33375-2015 is carried out.
continuous fibrous ytterbium laser, laser processing, thermal impact area, polymer composites, carbon plastic
1. Mikhailin, Yu.A. Fibrous polymer composites in engi-neering. - S-Pb.: Scientific Fundamentals and Technologies, 2015. - pp. 720.
2. Perepelkin, K.E. Reinforcing filaments and fibrous po- lymer composites. - S-Pb.: Scientific Fundamentals and Technologies, 2015. - pp. 380.
3. Nakhodkin, P.A. “Black Wings” prepare for flights // Aviation Industry: journal, 2011, No.1, pp. 42-47
4. Raskutin, A.E., Khrulkov, A.V., Girsh, R.I. Technological peculiarities of composite machining at manufacturing structure parts // Proceedings of VIAM: electronic scientific-tech. journal, 2016. No.9. pp. 106-118.
5. Jamal Y. Sheikh-Ahmad Machining of Polymer Composites. Berlin, Springer, 2009. 315 p.
6. Panov, D.V., Korotkov, A.N., Saushkin, B.P. Compo-sites and Machines for Their Machining // Rhythm: special journal, 2014. No.7. pp. 32-36.
7. Grigoriyants, A.G., Sokolov, A.A. Nonmetallic Material Laser Processing. - M.: Higher School. 1988. - pp. 191.
8. Grigoriyants, A.G., Shiganov, I.N., Misyurov, A.I. Technological Processes of Laser Processing. - M.: Publishing House of Bauman STU of Moscow, 2008. - pp. 664.
9. Veiko, V.P. Technological Lasers and Laser Emission - S-Pb: S-PbSU ITMO, 2007. - pp. 52.
10. Wax, E.D., Milenky, M.N., Saprykin, L.G. Practice of Precision Laser Processing, Moscow: Technosphere, 2013. - pp. 696.
11. C. Leone, S. Genna, V. Tagliaferri, Fibre laser cutting CFRP thin Sheets by multi-passes scan technique // Optics and Lasers in Engineering, 2014, v. 53, p. 43-50.
12. Stock J., Zaeh M., Conrad M. Remote Laser Cutting of CFRP: Improvements in the Cut Surface // Physics Procedia, 2012, no. 39, pp. 161-170.
13. Anufriev, V.I. Designer-Mechanist’s Reference Book: in 3 Vol., Vol.1. - M.: Mechanical Engineering, 2001. - pp. 920.
14. Gureyev, D.M., Kuznetsov, S.I., Petrov, A.L. Carbon composite laser cutting // Proceedings of Samara Scientific Center of the Russian Academy of Science, 1999. No.2. pp. 255-264.
