employee
Bryansk, Bryansk, Russian Federation
The promising direction of strengthening development is a combined strengthening with surface plastic deformation with the further chemical-thermal treatment, in particular, with case-hardening. The technological possibilities of combined strengthening by a deformation wave with the further case-hardening of structural mild low-alloy steels by the example of steel 10ChSND are considered. It is defined that the results, obtained as a result of combined strengthening, are comparable with the results of strengthening of case-hardened alloy steels used for manufacturing heavy loaded parts of machines.
deformation wave, blow, steel, carbonization, hardness, strengthening depth, strengthening degree, surface layer
1. Papshev D.D., Pronin A.M., Kubyshkin A.B. Efficiency of hardening of cemented machine parts // Bulletin of Machine Building. - 1990. - No. 8. - pp. 61-64
2. Lakhtin Yu.M., Arzamasov B.N. Chemical-thermal treatment of metals - M.: Metallurgy, 1985. - 256 p.
3. Kirichek A.V., Soloviev D.L., Volobuev A.V. Innova-tive static-impulse processing // Science intencive technology in mechanical engineering. 2011. № 1(01). pp. 43-48
4. Kirichek, A.V., Solov'ev, D.L., Silant'ev, S.A. Influence of regimes of static-pulse processing on uniformity of superficial layer hardening // Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem) (2) 2004. pp. 13-17.
5. Kirichek A.V., Soloviev D..L Expansion of technological possibilities of strengthening processing of metal materials by wave deformation influence // Science intencive technology in mechanical engineering. 2014. No. 11(41). - pp. 28-35.
6. Kirichek А.V., Soloviyov D.L. Prospects of operation properties multiple increase by natural metal reinforcement at technological support of multi-level heterogeneous structure // Strengthening Technologies and Coatings. 2014. № 4 (112). pp. 3-10.2. Baskov, М.V. Investigation of cutter coatings impact upon quality parameters of surface layer and wear-resistance of parts during turning // Bulletin of Soloviyov State Aircraft Technical University of Rybinsk. 2017. №8. - pp. 38-43.
7. Effective technologies of surface plastic deformation and combined processing. / V.N. Belyaev, V.P. Ivanov, A.R. Ingemansson, A.N. Isaev, A.V. Kirichek et al. - Moscow: Izd. House "Spektr", 2014. - 403 p.
8. Kirichek A.V., Soloviev D.L., Tarasov D.E. Possibilities of increasing the longevity of machine parts from cemented steels by combined hardening // Bulletin of the Rybinsk State Aviation Technological Academy. P.A. Soloviev, 2012. № 2. - pp. 65-67
9. Increase of contact endurance of machine parts by heterogeneous deformation hardening by static-pulse treatment / A.V. Kirichek, D.L. Soloviev, S.V. Barinov, S.A. Silantiev // Reinforcing technologies and coatings. 2008. No. 7. - pp. 9-15
10. Increase of contact durability of cemented bearing steels by combined treatment / A.V. Kirichek, D.E. Tarasov, D.L. Soloviev, M.A. Zhilyaev // Fundamental and Applied Problems of Engineering and Technology. 2011. № 4/2 (288). - pp. 83-89
11. Kirichek A.V., Soloviev D.L., Tarasov D.E. Streng-thening of iron-carbon alloys by combined treatment with a deformation wave and cementation // Reinforcing technologies and coatings. 2013. No. 12. - pp. 36-39
12. Kirichek A.V., Soloviev D.L., Tarasov D.E. Increasing the durability of machine parts by combined hardening. // Bulletin of Bryansk State Technical University. 2016. № 2 (50). pp. 52-58.
