SCIENCE INTENSIVE TECHNOLOGY IN STEEL PLATES PRESSURE JOINT
Authors:
1.
Russian University of Transport (MIEC)
(kafedra «Soprotivlenie materialov i stroitel'naya mehanika», professor)
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Type:
Article
Pages:
from 45
to 48
Status:
Published
Received:
03.03.2017
Accepted:
03.03.2017
Published:
03.03.2017
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian, English
Keywords:
creeping plasticity, intensities of deformations and stresses, pressure, relaxation, time.
Abstract (English):
The processes and computation of modes for the pressure joining of parts and structures under isothermal conditions are offered. The state of material under deformation is assumed to be creeping-plastic. The power method for the computation of technology parameters is used. The technological data and samples of products are shown.
The processes and computation of modes for the pressure joining of parts and structures under isothermal conditions are offered. The state of material under deformation is assumed to be creeping-plastic. The power method for the computation of technology parameters is used. The technological data and samples of products are shown.
Keywords:
creeping plasticity, intensities of deformations and stresses, pressure, relaxation, time.
creeping plasticity, intensities of deformations and stresses, pressure, relaxation, time.
1. Isothermal Deformation of High-Strength Anisotropic Materials / Yakovlev S.P., Chudin V.N. et al. - М.: Mechanical Engineering, 2003. - pp. 427.
2. Chudin, V.N. Case-shaped cellular structure gas shaping // Science Intensive Technologies in Mechanical Engineering. - 2015. - №9(51). - pp. 35-38.
3. Rabotnov, Yu.N. Mechanics of Deformable Solid. - М.: Science, 1979. - pp. 744.
