employee
Rostov-na-Donu, Rostov-on-Don, Russian Federation
The purpose of this theoretical investigation is the modeling of finish-strengthening under conditions of a rotating field for the definition of ferromagnetic indenter kinematic properties. This method is based on functioning devices offered by D.D. Logvinenko. The basis of these devices is an inductor located into the case. This inductor represents a modified stator of an induction motor. In the stator bore there is installed a cylindrical pipe made of nonmagnetic material the inner surface of which limits a working area of the device. From the obtained results of theoretical researches it follows that the kinematic properties of ferromagnetic indenters are defined by field parameters – induction of a direct and an alternating fields, frequency and gradient of induction of an alternating field, and also magnetic and inertial properties of indenters.
upgrade, surface plastic deformation, finish-strengthening, rotating field, ferromagnetic indenter, magnetic-liquated rotating layer.
1. Technology and Tools for Finish-Strengthening of Parts by Surface Plastic Deformation: Reference Book in 2 Vol., Vol.1/ under the general editorship of A.G. Suslov. М.: mechanical Engineering, 2014. pp. 480.
2. Lebedev V.А. Technology of Dynamic Methods of Surface Plastic Deformation: Scientific Edition. Rostov-upon-Don: Publishing Center DSTU, 2006. pp.183.
3. Babichev А.P., Babishev I.А. Fundamentals of Vibration Technology. Rostov-upon-Don: Publishing Center of DSTU, 2008. pp. 694.
4. Babichev А.P., Motrenko P.D. Vibroimpact finish-strengthening of parts with unconventional forms and dimensions of Science Intensive Products (by the example of helicopter power parts) // Science Intensive Technologies in Mechanical Engineering. 2011. №1(01). pp. 38-43.
5. Tamarkin М.А., Tishchenko E.E. Quality parameter analysis of surface layer at finish-strengthening centrifugal-rotational working // Bulletin of Mechanical Engineering. 2005. № 12. pp. 36-40.
6. Logvinenko D.D., Shchelyakov О.P. Intensification of Technological Processes in Devices with Vortex Layer. Kiev: Technics, 1976. pp. 143.
7. Vernigorov Yu.М., Yegorov I.N., Yegorova S.I. Ther-modynamics of magnetic-liquated layer in coarse-dispersion ferromagnetic // Proceedings of Colleges of North-Caucasian Regional Technical Science. 2004. № S8. pp. 28-33.
8. Buevich Yu.А., Syutkin S.V., Tetyukhin V.V. On theory of developed magnetic-liquated layer // Magnetic Hydrodynamics. 1984. № 4. pp. 3-11.
9. Lourie А.I., Khojayev К.Sh. Lagrange-Maxwell equation in engineering mechanics course / In b.: Scientif.-Method. Papers on Engineering Mechanics. Issue 6. М.: Higher School. 1976. pp. 72 - 81
