IMPROVING OF ACCURACY AT BILLET PROCESSING IN CNC MACHINES
Authors:
3.
Siberian Federal University
Krasnoyarsk, Krasnoyarsk, Russian Federation
Krasnoyarsk, Krasnoyarsk, Russian Federation
Type:
Article
Pages:
from 44
to 48
Status:
Published
Received:
15.02.2016
Accepted:
15.02.2016
Published:
15.02.2016
Language:
Russian
Keywords:
tool holders, tool change, machine tool, processing accuracy.
Abstract (English):
The problems of accuracy improvement at billet processing withemphasison the influence degree of errors in tool holder geometric forms on the accuracy of the in-line arrangement and tangent stiffness atfixing in a machine spindle are considered. The most frequent cases of form errors, occurring at the tool holders production, are considered: circular deviation (particularly occurrence of out-of-roundness in cross-sectional view), deviations of straightness of cone generatrix (bulge, incurvature), angular errors. To evaluate the accuracy of the in-line arrangement and rigidity of corners of the tool spindle intersystem, the ANSYS Software is used.
The problems of accuracy improvement at billet processing withemphasison the influence degree of errors in tool holder geometric forms on the accuracy of the in-line arrangement and tangent stiffness atfixing in a machine spindle are considered. The most frequent cases of form errors, occurring at the tool holders production, are considered: circular deviation (particularly occurrence of out-of-roundness in cross-sectional view), deviations of straightness of cone generatrix (bulge, incurvature), angular errors. To evaluate the accuracy of the in-line arrangement and rigidity of corners of the tool spindle intersystem, the ANSYS Software is used.
Keywords:
tool holders, tool change, machine tool, processing accuracy.
tool holders, tool change, machine tool, processing accuracy.
1. Denisenko A.F., Petrunin V.I., Kazakova O.Yu. Study of accuracy and toughness of tool- change mechanisms of metal-cutting machines. Samara: Samara State Technical University, 2012, 188 p.
2. Denisenko A.F., Kazakova O.Yu. Forecasting the shape change of basing surface of metal-cutting machine tool system at operation. Vestnik mashinostroeniya. 2011.No. 5.Pp. 54-57.
3. Design of metal-cutting machines and machine complexes. In 3 V. V.1 A.S .Pronikov and others. Moscow: Bauman MSTU publishing house, 2000. 444 p.
