GAS FORMING OF BODY EMBOSSING-STRINGER PANELS AT SHORT-TERM CREEP
Authors:
1.
Russian University of Transport (MIEC)
(kafedra «Soprotivlenie materialov i stroitel'naya mehanika», professor)
Moskva, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
Type:
Article
Pages:
from 30
to 33
Status:
Published
Received:
19.01.2016
Accepted:
12.02.2016
Published:
12.02.2016
Language:
Russian
Keywords:
creep. deformations, strain rates, stresses, time, pressure, strain stability.
Abstract (English):
The technology andanalysis of hot shape-forming mode by gas pressure of embossing-stringer panelsare suggested. Thecreep state of a deformable materialis assumed. The assessments of gas pressure, local stability of strain, material damageability and process duration are given.The technological data and samples of productsare presented.
The technology andanalysis of hot shape-forming mode by gas pressure of embossing-stringer panelsare suggested. Thecreep state of a deformable materialis assumed. The assessments of gas pressure, local stability of strain, material damageability and process duration are given.The technological data and samples of productsare presented.
Keywords:
creep. deformations, strain rates, stresses, time, pressure, strain stability.
creep. deformations, strain rates, stresses, time, pressure, strain stability.
1. Chudin V.N. Shape forming by gas of body cell panels. Science intensive technologies in mechanical engineering. 2015. № 9(51). Pp. 35-38.
2. Isothermal pneumatic forming of anisotropic high-strength sheet materials. S.S. Yakovlevet al. Moscow: Mashinostroyenie, 2009. 352 p.
3. Malinin N.N. Creep in metal working. Moscow: Mashi-nostroyenie, 1986. 216 p.
4. Theory of metal forming. V.A. Golenkov et al.Moscow:Mashinostroyenie, 2009. 442 p.
5. Kolmogorov V.L. Mechanics of metal form-ing.Ekaterinburg: UPI, 2001. 386 p.
