VAK Russia 2.5.3 UDC 621.923 VAK Russia 2.5.6 VAK Russia 2.5.8

TECHNOLOGY AND EQUIPMENT FOR LAYER-BY-LAYER PARTS RECONDITIONING DEPENDING ON THE DEGREE OF THEIR SURFACE WEAR Technology and equipment for layer-by-layer parts reconditioning depending on the degree of their surface wear

Published in Science intensive technologies in mechanical engineering · Issue 6, 2026 · Pages 40–48 · Rubric: Science intensive technologies in coating, parts repair and recovery
DOI: https://doi.org/10.30987/2223-4608-2026-6-40-48
Received: 16.02.2026 Accepted: 19.03.2026 Published: 29.06.2026 Language of publication: ru-RU
The concept of layer-by-layer reconditioning of the surfaces of machine parts is viewed for increasing their operational reliability and durability. The difference lies in the fact that physical and mechanical condition of the surface layer significantly affects the operability of the parts. The main causes of surface wear include abrasive and adhesive wear, fatigue failure, and corrosion. The introduction of adaptive technologies based on the synthesis of electrophysical and thermomechanical processes is a key step in the effective parts reconditioning. A proposed method consists in using a combination of alloyed ferromagnetic powders (FMP) buildup in an electromagnetic field with surface yield strain and low-alloyed wire buildup with rotary cutting. A unit for production is described that provides flexibility of configuration with the ability to achieve high-quality coatings. Various hardening modes, depending on the degree of wear, integrate the processes of buildup and cutting, and minimize the cost of subsequent machining. The microstructures of the formed surface layer are investigated, their characteristics are revealed, and their effect on operational properties is estimated. The proposed concept of layer-by-layer renovation and the integration of modern production technologies create the basis for the introduction of innovative methods of hardening and restoration into repair practice, providing improvements in the physical and mechanical characteristics of the restored components. The practical significance of the work lies in the creation of an effective method for restoring parts, allowing a differentiated approach to wear compensation, improving the physical and mechanical characteristics of the material, and reducing the cost of subsequent machining. The results obtained open up new opportunities for the introduction of adaptive methods of hardening and renovation in modern repair production, providing increased reliability and durability of machine parts.
process equipment design, combined pulsed thermomechanical effects, electromagnetic field, deforming tool, hardening and reconditioning of parts
Text References
Text (PDF)
Read Download

1. Vasiliev A.S., Dalskiy A.M., Klimenko S.A., Polonskiy L.G., Kheifets M.L., Lizarditsin P.I. Technological foundations of machine quality management, Moscow: Mashinostroenie, 2003. 256 p.

2. Volovik E.L. Handbook of restoration of parts. Moscow: Kolos, 1981. 351 p.

3. Kheifets M.L. Design of combined processing operations. Moscow: Mashinostroenie, 2005. 272 p.

4. Kheifets M.L., Kozhuro L.M., Mrochek J.A. Self-organization processes at surface formation. Gomel: IMMS NANB, 1999. pp. 276.

5. Treatment of wear-resistant coatings / Edited by J.A. Mrochek. Minsk: Design PRO, 1997. 208 p.

6. Kheifets M.L., Chemisov B.P., Gretsky N.L. Technology and equipment for combined restoration and hardening of internal combustion engine parts // Bulletin of the Rybinsk State Aviation Technological Academy named after P.A. Solovyov. 2007. No. 1 (11). pp.144−147.

7. Kheifets M.L., Kozhuro L.M., Gretsky N.L. Electromechanics of pulsed coating processes with ferromagnetic powders // Hardening technologies and coatings, 2008, No. 3, pp. 51−56.

8. Anisovich A.G., Andrushevich A.A. Microstructures of ferrous and non-ferrous metals. Minsk, Belorusskaya nauka, 2015. 131p.

9. Kolmakov A.G. Technological Control on the Heredity of Operational Quality Parameters Prement. In: Engineering Failure Analysis. Chapter 8 / Ed. By K.Thanapalan. London: IntechOpen, 2020. pp.141−160.

10. Vityaz P.A. Synergetic Technologies of Direct Layer Depositionin Aerospace Additive Manufacturing / Ed. By F. Fores and R. Boyer. Cambridge: Elsevier. 2019. pp. 427−448.