1. Maltsev NR, Bikmukhametova MA, Zabaturin AM. Bending defects arising in the manufactureing of housing elements of oil refinery equipment. Izvestiya Tula State University. Technical Sciences. 2025;5:242-249.
2. Verkhov EYu, Morozov YuA. Analysis and development of technology for manufacturing bent thick-sheet parts. Bulletin of Moscow State Open University. Series: Engineering and Technology. 2011;4:14-19.
3. Tamila VA, Nesterovich ML. Research of high strength steels bending. Foundry Production and Metallurgy. 2020;3:71-78.
4. Tamila VA, Nesterovich ML. Bending technology of high-strength steel sheets and tools for its realization. Foundry Production and Metallurgy. 2020;1:50-55.
5. Astashchenko VI, Safarov DT, Shveeva TV, Sochenko TV. Features and experience of using high-strength steels for cold sheet stamping of automobile parts. Bulletin PNRPU. Mechanical Engineering, Materials Science. 2024;26(3):74-81.
6. OST 26.260.758-2003. Metal structures. General technical requirements. Moscow; 2003.
7. OST 1 00286-78. Bending radii of sheet materials made of steels. Moscow; 1978.
8. Chukin MV, Poletskov PP, Alekseev DYu. Study of the ability of high-strength steel to plastic deformation when bending at the angle of 90°. Journal of Siberian Federal University. Engineering and Technologies. 2016;9(8):1326-1332.
9. Morozov YuA, Verkhov EYu, Krutina EV, Frolov AA. Development of an evaluation technique for determining the plasticity resource in sheet bending processes. V Mire Nauchnikh Otkrytiy. 2015;12-3(72):882-896.
10. Astashchenko VI, Galimov ER, Shveev AI. Method for determining the suitability of steel for cold plastic deformation. RF Patent No. 2568887 C1 MPK G01N 33/20, G01N 3/40. 20 Nov 2015.
11. Feoktistov SI, Andrianov IK. Assessment of the upper and lower levels of permissible strains in the manufacture of sheet and thin-walled parts based on the forming limit diagram. Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika. 2023;86:136-148.
12. Keller IE, Petukhov DS, Kazantsev AV, Trofimov VN. The limit diagram under hot sheet metal forming. A review of constitutive models of material, viscous failure criteria and standard tests. Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences. 2018;22(3):447-486.
13. Vilimok YaA, Evdokimov AK. Comparative analysis of limi stampability under biaxial tension. Izvestiya Tula State University. Technical Sciences. 2014;7:71-75.
14. Kozlov ED, Botkin AV. Computer modeling of bending of the part "Staple" MolodezhnyjVestnik UGATU. 2024;1(30):60-65.
15. Klochkov VN, Podymako ME, Kolesov IA. Modeling of the technological process of bending sheet parts at the stage of designing stamping equipment. Vestnik of Brest State Technical University. 2024;2(134):98-103.
16. Nesterenko ES, Shcherbov MI. Simulation the bending process of a part with a bending angle greater than 90 degrees in an improved die with elastic elements. Izvestiya Tula State University. Technical Sciences. 2021;6:380-383.
17. Fedorina EV, Dyakov IF. Nomenclatural cluster of sheet stamping parts for designing metal cutting. Models, Systems, Networks in Economics, Technology, Nature and Society. 2018;1(25):203-219.
18. Fedorina EV, Kokorin VN. Process simulation of metal cutting order to minimize costs. Strengthening Technologies and Coatings. 2016;4:39-43.
19. Ambos E, Neubauer A, Oswald Yu. Economy of raw materials. Moscow: Metallurgiya; 1989.
20. Babaev FV. Optimal cutting of materials using a computer. Moscow: Mashinostroenie; 1982.
21. Minaev IV, Sergeev NN, Tikhonova IV. Method of forming a hardened near-surface layer in the area of laser cutting of parts. RF Patent No. 2695715 C1 25 Jul 2019.



