VAK Russia 05.22.00 UDC 62 CSCSTI 73.49

COMPARATIVE ANALYSIS OF RESISTING TO DIGGING FORCES EFFECTING STOCK BUCKET OF EXCAVATOR AND CYLINDRICAL BUCKET

Published in Bulletin of Bryansk state technical university · Issue 4, 2020 · Pages 11–20 · Rubric: Transport
DOI: https://doi.org/10.30987/1999-8775-2020-4-11-20
Received: 10.04.2020 Accepted: 19.04.2020 Published: 19.04.2020 Language of publication: ru-RU
The purpose of the work consists in the productivity increase of a single-bucket excavator at the expense of bucket shape perfection. The improved and offered bucket design will allow scooping more soil without changing hydraulic drive characteristics. This effect is achieved at the expense of the cylindrical shape of the rear wall of the bucket. There is presented a computation scheme of forces acting upon an improved bucket. The calculations of the advanced excavator bucket based on the YuMZ-6AKL tractor allowed drawing an outline of the supposed design and obtaining moment dependences of resistance on a bucket during digging upon a bucket rotation angle. The dependences of moment resistance on the bucket are formed for buckets with the capacity of 0.25m3, 0.35m3, 0.45m3, 0.55m3 and 0.65m3. The improved bucket design will allow increasing the volume of soil scooped thereby increasing productivity of single-bucket hydraulic excavators. Investigation methods – theoretical researches. The investigation results and novelty: there is offered the improved design of a bucket, a calculation circuit of forces acting upon an improved bucket. Conclusions: the advanced design of a bucket will allow scooping a larger volume of soil without changing hydraulic drive characteristics. In such a way, the productivity increase of single-bucket hydraulic excavators without changing hydraulic drive characteristic is achieved.
excavator, bucket, moment of force, productivity, digging, soil, hydro-cylinder
Text References
Text (PDF)
Read Download

1. Patent RF №2656286, MPK E02F 3/28. Buryy G. Kovsh ekskavatora sfericheskiy; zayavitel' i patentoobladatel' Buryy G. G.

2. Buryy G.G., Scherbakov V.S., Skobelev S.B., Kovalevskiy V.F. Sovershenstvovanie konstrukcii kovsha gidravlicheskogo ekskavatora // Vestnik SibADI. 2019. №3. S. 202-213.

3. Balovnev V. I. Modelirovanie processov vzaimodeystviya so sredoy rabochih organov dorozhno-stroitel'nyh mashin. M.: Vysshaya shkola, 1981. 335 p.

4. Zelenin A.N., Pavlov V.P., Agaronik M.Ya., Korolyov A.V., Perlov A.S. Investigations of soil scooping by hydraulic excavators // Construction and Road Machines. 1976. No.10. P, 9-11.

5. Ananin V. G. Rezul'taty eksperimental'nyh issledovaniy i modelirovaniya rabochego oborudovaniya odnokovshovogo ekskavatora // Vestnik Tomskogo gosudarstvennogo arhitekturno-stroitel'nogo universiteta. 2013. № 1 (38). P. 205 - 213.

6. Kuznecova V. N., Savinkin V. V. Analiz effektivnosti raboty odnokovshovogo ekskavatora // Vestnik SibADI. 2014. № 6. P. 26 - 33.

7. Pavlov V.P., Abramov A.N. Recommendations on choice of excavator bucket parameters // Transport Construction. 1984. No.7. P. 35-36.

8. Tarasov V.N., Kovalenko M.V. Soil digging mechanics based on theory of extreme tangential stresses // Construction and Road Machines. 2003. No.7. P. 38-43.

9. Kuznetsova V.N., Savinkin V.V. Ensuring power effectiveness of soil digging at the expense of angle positioning optimization of excavator working equipment // Construction and Road Machines. 2015. No.3. P. 44-47.

10. Tarasov V.N., Kovalenko M.V. Mechanics of soil digging with hydraulic excavator bucket // Construction and Road Machines. 2003. No.8. P. 41-45.

11. Dombrovsky, N.G., Galperin M.I. Soil-Digging and Transport Machines. M.: Mechanical Engineering, 1965. 276 p. .

12. Zelenin A.N., Balovnev V.I., Kerov I.P. Machines for Soil Works. M.: Mechanical Engineering, 1975. 424 p.

13. Fedorov D. I. Rabochie organy zemleroynyh mashin. M.: Mashinostroenie, 1990. 360 p.

14. Vetrov Yu. A. Rezanie gruntov zemleroynymi mashinami. - M.: Mashinostroenie, 1971 - 357 s.

15. Sinclair R. Hydraulic Excavators: Quarrying & Mining Applications. London, Sinclair Publishing, 2011. 388 p.