UDC 62 CSCSTI 55.01 CSCSTI 55.13 CSCSTI 55.35

USE OF BARKHAUSEN NOISE FOR RESIDUAL STRESS DEFINITION AFTER DIAMOND SMOOTHING OF HIGH-PRESSURE BRANCH PIPES Use of Barkhausen noise for residual stress definition after diamond smoothing of high-pressure branch pipes

Published in Science intensive technologies in mechanical engineering · Issue 3, 2020 · Pages 24–31 · Rubric: FUNCTION-ORIENTED AND MODULAR TECHNOLOGIES (archived)
DOI: https://doi.org/10.30987/2223-4608-2020-3-24-31
Received: 02.02.2020 Accepted: 22.03.2020 Published: 22.03.2020 Language of publication: ru-RU
The results of residual stress definition after a valve unit diamond smoothing of high-pressure fittings are shown. In the paper there is used Barkhausen noise method allowing the definition of the residual stress level at a great depth as compared with the X-ray method. There is presented a procedure for the definition of residual stresses according to a ratio of a magnetoelastic parameter – deformation. The advantage of the diamond smoothing as a method of FSD allowing the decrease of tensile residual stresses and the increase compression stresses on a contact surface of fittings units is shown.
residual stresses, diamond smoothing, high-pressure branch pipe, deformation, valve unit, Barkhausen noise
Text References
Text (PDF)
Read Download

1. Pogodin, V.K. Clacks for High Parameters of Operation. Investigations and Design. Publishing House of Bratsk State University. Bratsk, 2016. - pp. 363.

2. Klimova, L.G., Formation of technological residual stresses at surface plastic deformation / L.G. Klimova / Bulletin of Irkutsk State Technical University. - Publishing House of FSBEI HE IRNITU, Irkutsk, 2011. No.5(52) - pp. 42-46.

3. Nikolaeva, E.P. Estimate of residual stresses in weld depositions of highpressure valve seats / E.P. Nikolaeva, A.N. Mashukov / Chemical and Oil-Gas Engineering.  M.,  No.7 2017. - pp. 26-29.

4. Nikolaeva, E.P., Application of X-ray structure analysis and Barkhausen noise for investigation of structural steel 30HGSA after shot blasting / E.P. Nikolaeva, E.V. Gridasova, V.V. Gerasimov / Proceedings of Samara Scientific Center of Sciences / Samara, Vol.17, No.2, 2015, pp. 125-132.

5. Zaides S.A., Speed mode impact of diamond smoothing upon surface quality improvement of valve units of high-pressure fittings / S.A. Zaides, A.N. Mashukov / Structural material life (from manufacturing up to utilization) - Proceed-ings of the IX-th All-Russian Scientif.-Tech. Conf. with Inter. Participation. - IRNITU Publishers, Irkutsk, April 24-26, 2019. - pp. 81-88.

6. Zaides S.A., Application of diamond smoothing technology for microgeometry improvement of valve units of high-pressure fittings / S.A. Zaides, A.N. Mashukov / Bulletin of Kuzbass State Technical University. - Publishing House of FSBEI HE “Gorbachyov State Technical University of Kuz-bass”. - Kemerovo, 2019.  No.1. - pp. 5-13.

7. Papsheva N.D., Diamond smoothing impact upon cutter working capacity / N.D. Papsheva, O.M. Akushskaya / Proceedings of Samara Scientific Center of the Russian Academy of Sciences, Vol.18, No.4(2), 2016. pp. 357-361.

8. Babenko M.G., Measurement of residual stresses in material of engineering objects through method of probing hole / M.G. Babenko, S.V. Slesarev, A.I. Babenko / Saratov, Bulletin of SSTU. 2011. No.2(56). Issue 2. - pp. 21-23.

9. Ultrasonic evaluation of welding residual stresses in stainless steel pressure vessel / A. Joseph, P. Palanichamy, T. Jayakumar // Journal of Nondestructive Evaluation, 2015, Volume 34, Number 1, p. 1.

10. Measuring multiple residual-stress components using the contour method and multiple / Cut P. Pagliaro, M. B. Prime // Experimental Mechanics.  February 2010, Volume 50, Issue 2, pp. 187-194.

11. Evaluation of residual stresses relaxation by post weld heat treatment using contour method and x-ray diffraction method / P. Xie1, H. Zhao1, B. Wu2, S. Gong // Experimental Mechanics.  2015.  55.  pp. 1329-1337.

12. Nikitina, E.N., Advantages of acoustic elasticity method for nondestructive check of mechanical stresses in machinery / N.E. Nikitina, S.V. Kazachek // Bulletin of Scientific Technical Development.  M.,  2010.  № 4(32).  pp. 18-28.

13. Ovseenko, E.S., Methods for definition of technological residual stresses in lowrigidity parts / E.S. Ovseenko, A.N. Ovseenko, E.G. Yagutkin / Mining Information-Analytical Bulletin (Scientific-Technical Journal).  M., 2011.  №.S4-6.  pp. 29-32.

14. Zaides, S.A. External Surface Plastic Deformation. - Irkutsk: IrSTU Publishers, 2001. -311 p.

15. Suominen, L., Flaw location in ferromagnetic parts during grinding using Barkhausen effect // In the World of Nondestructive Check.  June 2011.  № 2(52). - pp. 74-78.

16. Nikolaeva, E.P. Use of Barkhausen noise method for parts strengthening control by surface plastic deformation // Proceedings of Samara Scientific Center of the Russian Acad-emy of Sciences, Vol. 15, No.6(2), 2013. - pp. 428-431.

17. Saveliev, V.A., Processing technology impact upon structure and properties of close fitting valve of steel 20H13 // V.A. Saveliev, T.P. Sorogina // Bulletin of KSU.  2010.  №1. - pp. 106-107.

18. GOST R 56542-2015. Nondestructive Check. Classification of Kinds and Methods.

19. GOST R 55044-2012. Technical Diagnostics. Order of Object Choice.

20. Karmanov V.V., Experience of XSTRESS robotized complex application for measurement of technological residual stresses / V.V. Karmanov, V.N. Trofimov, A.S. Nurtdinov, S.N. Zvonov // Bulletin of Nosov STU of Moscow.  2015.  №1. - pp. 56-59.