Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Journals Conference proceedings News
Authors
Bulletin of BSTU Transport engineering Science intensive technologies in mechanical engineering Automation and modeling in design and management Ergodesign
Rubrics
Submit manuscript
Bulletin of Bryansk state technical university

MATHEMATICAL SIMULATION WORKFLOW MODEL EXECUTIVE HYDRAULIC CYLINDER LOCKING MECHANISMS. Mathematical simulation workflow model executive hydraulic cylinder locking mechanisms.

Published in Bulletin of Bryansk state technical university · Volume 2014, Issue 3 · Pages 165–169 · Rubric: Computer engineering and information technology
DOI: https://doi.org/10.12737/23165
Received: 07.12.2016 Accepted: 07.12.2016 Published: 07.12.2016 Language of publication: RUS
Authors
BE
Bezzub Yuriy
NA
Nataliya Sakovich
EV
Evgeniy Khristoforov
A.
A. Kuznetsov
ABSTRACT
A mathematical model and its realizing method of calculation of the workflow executive cylinder locking mechanism with hydraulic tipping device for vehicles - trucks. Developed a program for its implementation on the PC.
KEYWORDS
cylinder, safety, operator, mathematical model simulation, loading platform, hydraulic.
Text References
Text
Text (PDF)
Read Download

1. Eresko, A.S. Improvement of hydraulic actuator of load-lifting devices of load-haul-dump and road-building machinery: Thesis for Can.Eng.Degree /A.S. Eresko. - Krasnoyarsk, 2004. - 196 p.

2. Lagerev, A.V. Prediction of kinetics of dependability indicies hydraulic drives of load-haul-dump machines simulation-based flow of element failures / A.V. Lagerev, V. I. Averchenkov, E. A. Lagereva // Bulletin of Bryansk State Technical University. - 2012. - No. 2(34). - pp. 8-16.

3. Strogalov, V.P. Imitation modeling / V.P. Strogalov, I. O. Tolkacheva. - M.: Publishing House of MSTU named after N. E. Bauman, 2008. - 280 p.

4. Pat. 130013 U1 RF. IPC F15B 15/26 / Hristoforov E. N., Sakovich N. E., Bezzub Yu.V., Kuznetsov A. A., Kovalyov A. F. - Published 10.07.13, Bull. No. 19.

PDF JATS XML
The contact persons
Editor-in-Chief, editorial board chair
Editor-in-chief  of the journal  Bulletin of Bryansk State Technical University  KHANDOZHKO ALEKSANDER VLADIMIROVICH     Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03.   Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.
6077
downloads
VAK Crossref RINC RINC Science Index Antiplagiat
© 2025 БГТУ
Agreement Personal data protection and processing policy Support Powered by Editorum, 2026 Instructions
Login or Create
* Forgot your password?