Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems.

Valeriy Spasennikov; Sergey Kondratenko

doi:10.12737/22741

METHODS OF ANALYSIS AND MODELING ACTIVITIES OF OPERATORS IN THE PROCESS OF ERGONOMIC SOFTWARE DEVELOPMENT AND OPERATION OF MAN-MACHINE SYSTEMS. Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems.

АА Аа

Published in Bulletin of Bryansk state technical university · Volume 2015, Issue 1 · Pages 87–94 · Rubric: Computer engineering and information technology

DOI: https://doi.org/10.12737/22741

Received: 18.11.2016 Accepted: 18.11.2016 Published: 18.11.2016 Language of publication: RUS

Authors

Valeriy Spasennikov

ORCID ResearcherID SPIN

Sergey Kondratenko

Valeriy Spasennikov

Academic degree: doctor of psychological sciences

Science rang: professor

Bryansk State Technical University Professor · department “Humanitarian and Social Sciences” · Bryansk

ORCID ResearcherID SPIN

Sergey Kondratenko

Academic degree: candidate of technical sciences

Bryansk State Technical University docent · Bryansk

ABSTRACT

The methods of analysis of the microstructure of operator actions using flow charts of the labor process. Given denote elements of movements based on the three-band rating system. A method for the synthesis of fuzzy algorithms based on the evaluation standards of management for fuzzy temporal characteristics of the operator.

KEYWORDS

analysis of the microstructure of movements, graphs algorithms, workflow, span of control, the theory of fuzzy sets, ergonomics color

Text

Text (PDF)

Read Download

1. Gerasimov, B. M. Simulation model for an assessment of complex influence of engineering and psychological factors on efficiency of ergatic system / B. M. Gerasimov, G.V. Lozhkin, S. V. Skryl, V. V. Spasennikov.//Cybernetics and computer engineering. - 1984. - Issue 61. - pp. 88 - 95.

2. Spasennikov, V. V. Algorithmic evaluation and modeling of operators activities of aided tracking of air objects / V. V. Spasennikov//Technology, economy, information. Ser. "Ergonomics". - 1984. - Issue 1. - pp. 10-17.

3. Spasennikov, V. V. Reasons for standard rates of operator work on the basis of a method of group arguments accounting / V. V. Spasennikov//Technology, economy, information. Ser. "Ergonomics". - 1986. - Issue 1. - pp. 62-67.

4. Spasennikov, V. V. The analysis and designing of group activities in applied psychological researches / V. V. Spasennikov. - M.: Institute of Psychology of the Russian Academy of Sciences, 1992. - 204 p.

5. Spasennikov, V. V. Protection criteria of author´s rights of creators of the psychodiagnostic test techniques / V. V. Spasennikov//Psychological magazine. - 1994. - Vol. 15. - No. 1. - pp. 123-127.

6. Spasennikov, V. V. Engineering psychology as a subject matter in the course of training bachelors and post graduate students specialized on "System Analysis and Management" / V. V. Spasennikov//Innovative models and methods in economic psychology, ergonomics, production management. - Bryansk: BSTU, 2013. - pp. 110-114.

7. Averchenkov, V.I. Formution of the color palette for content busef image retrieval automated systems/V.I. Averchenkov, V.K. Gulakov, V.V. Miroshnikov, L.A. Potapov, V.V. Spasennikov, A.O. Trubakov//World of Sciences Journal. - 2013. - pp. 1-6.

8. Wooldridge, M. Intelligent Agents: Theory and Practice/M. Wooldridge, N. Jennings//The Knowledge Engi-neering Review. - 1995. - Vol. 10. - No. 2. - pp. 115-152.

PDF JATS XML

Editor-in-Chief, editorial board chair

Editor-in-chief of the journal Bulletin of Bryansk State Technical University KHANDOZHKO ALEKSANDER VLADIMIROVICH Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03. Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.

5637

downloads

GOST

Spasennikov V. V., Kondratenko S. V. Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems. // Bulletin of Bryansk state technical university. 2016. no. 1. pp. 87-94. DOI: https://doi.org/10.12737/22741. (Date of access 03.10.2026).

MLA

Valeriy Spasennikov, Kondratenko S. V.. "Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems.." Bulletin of Bryansk state technical university 2015.1 (2016): 87-94. DOI: https://doi.org/10.12737/22741.

APA

Spasennikov V. V., Kondratenko S. V. (2016). Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems.. Bulletin of Bryansk state technical university, 2015(1), 87-94. https://doi.org/10.12737/22741

Chicago

Valeriy Spasennikov, Kondratenko S. V.. "Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems.." Bulletin of Bryansk state technical university 2015, no. 1 (2016): 87-94. https://doi.org/10.12737/22741.

WIKI

{{cite journal | author = Spasennikov V. V., Kondratenko S. V. | title = Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems. | journal = Bulletin of Bryansk state technical university | year = 2016 | volume = 2015 | issue = 1 | pages = 87-94 | doi = 10.12737/22741 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

METHODS OF ANALYSIS AND MODELING ACTIVITIES OF OPERATORS IN THE PROCESS OF ERGONOMIC SOFTWARE DEVELOPMENT AND OPERATION OF MAN-MACHINE SYSTEMS. Methods of analysis and modeling activities of operators in the process of ergonomic software development and operation of man-machine systems.

Confirmation