Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Journals Conference proceedings News
Authors
Bulletin of BSTU Transport engineering Science intensive technologies in mechanical engineering Automation and modeling in design and management Ergodesign
Rubrics
Submit manuscript
Bulletin of Bryansk state technical university

AUTOMATION OF OPTIC INSPECTION CONTROL AT QUALITY MANAGEMENT OF PRINTED CIRCUIT ASSEMBLY SOLDERING

Published in Bulletin of Bryansk state technical university · Volume 2016, Issue 2 · Pages 149–155 · Rubric: Computer engineering and information technology
DOI: https://doi.org/10.12737/20271
Received: 23.06.2016 Accepted: 23.06.2016 Published: 23.06.2016 Language of publication: RUS
Authors
VL Vladimir Averchenkov
Vladimir Averchenkov
AL
Aleksandr Samsonenko
ABSTRACT
The development of methods of designing and assembling electronic units on circuit boards with the use of surface assembling techniques (SAT) became one of the priority fields. The product optic control is the most common method of control carried out by specialized equipment, an automated optic inspection (AOI). On the basis of the fulfilled analysis of technical solutions on the organization of inspections of different manufacturers and according to the test results in practice of some variants there was offered a circuit including the following equipment layout: a set of chambers, a system of linear displacement, a controller, a computer and software. The optical inspection software can be divided into the software of management and the software of control. The former serves for the computation of a control signal, the comparison of coordinates of equipment (with physical (F), imported (C) and in-spected (P)) interpretation of coordinates, interpolation and so on. The software of control contains modules: of data import from Gerberfile, the identification of board images obtained from the chamber, of the com-putation and comparison of identified components with a standard, of the analysis defects and the definition of a defect type, of database (DB) filling, of the interaction with a user. The system described in comparison with foreign analogues has a smaller set of options, but solves a problem of control under conditions of enterprises manufacturing electronics of the second class (according to IPCA-610 Standard “Criteria for Electronic Assemblage Acceptance).
KEYWORDS
automated optical inspection, AOI, surface mounting, printed circuit assemblies, soldering quality management, machine-tool construction
Text References
Text
Text (PDF)
Read Download

1. Afanasiev, В. Viscom/В. Afanasiev//High Tech-nology Vector. - 2013. - №1. - pp. 64-72.

2. Modern AOI Systems. - URL: http://www.ostec-smt.ru/knowledge-base/catalogues-and-brochures/.

3. Technologies - Quad Color. - URL: http://www.visionpro.com/website/MVP_Tri-Color.html.

4. Viscom vision technology. - URL: http://www.viscom.com/europe/products/smd-assembly-aoi/s3088-ultra-high-speed-3d-aoi/.

5. Cyber Optics Technology Leadership. Global Solu-tions. - URL: http://cyberoptics.com/eai_products_categories/automated-optical-inspection/.

6. MVP Machine Vision Products. - URL: http://www.visionpro.com/website/MVP_AOIProducts.html.

7. Mirtec. - URL: http://mirteceurope.com/products.php.

8. Orbotech. The Language of Electronics. - URL: http://www.orbotech.com/content/eng/556/.

9. Koh Young Technology. - URL: http://kohyoung.com/en/aoi/.

10. Gopel electronic. - URL: http://www.goepel.com/en/optical-inspection/aoi-systems.html.

11. AOI System. Automated Optical Inspection. - URL: http://www.aoisystems.com/products.html.

12. OpenCV. - URL: http://opencv.org/.

13. Fanni, A. Neural Network Diagnosis for Visual Inspection in Printed Circuit/ A. Fanni, M. Lera, E. Marongiu, A. Montisci. - 2013.

14. Liturri, L. Automatic Optical Inspection for the Detection of Printing Shift in Printed Circuit Board/ L. Liturri, G. Brunetti//Progress in Electromagnetic Research Symposium. - Pisa, Italy, 2014.

15. Zadorin, A.Yu. Visual Inspection Control of Circuit Board Quality: Thesis of Can. Eng. Degree/ A.Yu. Zadorin. - Yekaterinburg, 2003.

16. Reznichenko, S.V. Automated Geometry in Exam-ples and Problems/ S.V. Reznichenko. - М.: MPTI, 2001. - pp. 576.

17. Ucamco. The Gerber Format Specification. - URL: https://www.ucamco.com/downloads.

18. Krauinsh, D.P. Automated Electric Drive/ D.P. Krauinsh. - TPU, 2011. - pp. 128.

PDF JATS XML
The contact persons
Editor-in-Chief, editorial board chair
Editor-in-chief  of the journal  Bulletin of Bryansk State Technical University  KHANDOZHKO ALEKSANDER VLADIMIROVICH     Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03.   Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.
5224
downloads
VAK Crossref RINC RINC Science Index Antiplagiat
© 2025 БГТУ
Agreement Personal data protection and processing policy Support Powered by Editorum, 2026 Instructions
Login or Create
* Forgot your password?