employee
Bryansk, Bryansk, Russian Federation
Russian Federation
The article is devoted to the analysis of known structures of impact devices used in industry in order to obtain recommendations for their adaptation or when creating new structures for wave strain hardening by surface plastic deformation. The analysis was carried out on the used drive and on the main parameters of impact devices: impact energy, impact frequency, relative metal consumption and efficiency. The options are the best combinations of parameters for electric, pneumatic and hydraulic drives. Recommendations are given on the use of such devices, with appropriate adaptation, as pulse generators for wave strain hardening.
contact mechanics of engineering surfaces, friction and wear of interfaces, tribotechnical materials science, mechanics and control processes, kinematics, dynamics, strength and reliability of machines and structural elements
1. Kirichek A.V., Solov'ev D.L., Lazutkin A.G. Tehnologiya i oborudovanie statiko-impul'snoy obrabotki poverhnostnym plasticheskim deformirovaniem. (Biblioteka tehnologa. M.: Mashinostroenie, 2004) 288 s.
2. Kirichek A.V., Soloviev D.L., Altuhov A.Yu. Deformation Wave Hardening of Metallic Materials (Journal of Nano and Electronic Physics, 2014) Vol. 6, No 3, 03069 (4pp)
3. A V Kirichek, D L Soloviev and S A Silant'ev. Effect of the structure heterogeneously hardened by impact deformation waves upon impact strength of the material (IOP Conf. Series: Materials Science and Engineering, 2016) 124, 012157 (5 pp)
4. Kirichek A.V., Soloviev D.L., Khandozhko, A.V., Fedonina S.O. Problems of Analyzing Microstructure Images in Assessing the Impact of Technological Parameters of Combined Strain Wave Hardening on the Quality of the Surface Layer (CEUR Workshop Proceedings of the 29th International Conference on Computer Graphics and Vision (GraphiCon 2019)) Vol. 2485, pp. 261-264.
5. Kirichek A.V., Solov'ev D.L., Fedonina S.O. Proyavlenie tehnologicheskoy nasledstvennosti pri issledovanii tverdosti deformacionno-termicheski uprochnennyh staley (Naukoemkie tehnologii v mashinostroenii. 2019) № 8 (98). S. 25-28
6. A.V. Kirichek, D.L. Solov’ev, Impact device for static-pulse deformation working (Kuznechno-Shtampovochnoe Proizvodstvo, Obrabotka Metallov Davleniem, 2002) 10 pp. 35-40.
7. Progressivnye uzly i agregaty tehnologicheskih mashin. Kollektivnaya monografiya pod red. A.V. Kiricheka (M.: Izdatel'skiy dom «Spektr», 2012) 272 s.
8. Ushakov L.S., Kotylev Yu.E., Kravchenko V.A. Gidravlicheskie mashiny udarnogo deystviya. (M.: Mashinostroenie, 2000) 416 s.
