employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
Russian Federation
The problem of the possibility of creating a classification of methods for attaching traction electric motors of railway locomotives to the bogie frame is considered. As a result of the analysis, a classification has been proposed that makes it possible to systematize the design of traction motor suspensions for all known types of drives, as well as suspensions of axial gearboxes. use.
contact mechanics of engineering surfaces, friction and wear of interfaces, tribotechnical materials science, mechanics and control processes, kinematics, dynamics, strength and reliability of machines and structural elements
1. O.V. Izmerov A.V., Mihal'chenko G.S. Klassifikaciya kak instrument sinteza mehanicheskoy chasti tyagovyh privodov zheleznodorozhnogo podvizhnogo sostava // Mir transportno-tehnologicheskih mashin 2012. T. 4. S. 53-60.
2. O.V. Izmerov, «Kiberneticheskie aspekty metodov sinteza elektromehanicheskih sistem», monografiya, Orlovskiy gosudarstvennyy universitet, 2015.
3. V. A. Tatarіnova, J. Kalіvoda and L. O. Neduzha, “Research of locomotive mechanics behavior,” Science and Transport Progress 5, 56-65 (2018).
4. I. Klimenko, “Parameter optimization of the locomotive running gear,” Proc. of 22nd Intern. Sci. Conf. (Kaunas University of Technology, Trakai, Klaipėda, 2018), pp. 1095-1098.
5. D. Ronanki, S.A. Singh and S.S. Williamson, “Comprehensive topological overview of rolling stock architectures and recent trends in electric railway traction systems,” IEEE Trans. Transp. Electrif. 3, 724-738 (2017).
6. U. Drofenik ans F. Canales, “European trends and technologies in traction,” in Proceedings of the 2014 International Power Electronics Conference (IPEC-Hiroshima-ECCE Asia, Hiroshima, Japan, 2014), pp. 1043-1049.
7. Railway technical handbook, SKF Group (2012).
8. O.V. Izmerov “Tehnicheskie innovacii. Konstruirovanie konkurentosposobnyh mashin», monografiya, Orel, gosudarstvennyy universitet, 2013.
9. Shalygin M.G. Modelirovanie iznashivaniya nerovnostey subsherohovatosti poverhnostey treniya // Stroitel'nye i dorozhnye mashiny. 2016. - №3. - S. 42-44.
10. Shalygin M.G. Naukoemkaya tehnologiya umen'sheniya vodorodnogo iznashivaniya rabochih poverhnostey treniya // Naukoemkie tehnologii v mashinostroenii. 2016. № 10. S. 3-6.
11. Cvik L.B., Tarmaev A.A., Bocharov I.S. Gladkost' konturov tel kacheniya podshipnikov s cilindricheskimi rolikami i resurs ih ciklicheskoy raboty // Transport Urala. - 2019. - №3(62). - S. 20-27. DOI: 10/20291/1815-9400-2019-3-20-27
12. S. Myamlin, M. Luchanin and L. Neduzha, “Construction analysis of mechanical parts of locomotives,” (TEKA, Commission of motorization and energetics in agriculture, 2013), pp. 162-169.
13. D.Y. Antipin and V.I. Vorobiev, “Design and dynamic problems of traction drive of electric locomotive 2ES10 and proposals on its modernization,” IPDME 2018 3, 032001 (2018).
14. A Filippov V.N., Tarmaev A.A., Zhaysan I. Snizhenie iznosa grebney koles gruzovyh vagonov za schet racionalizacii parametrov uzlov opiraniya kuzova // Vestnik Ural'skogo gosudarstvennogo universiteta putey soobscheniya. - 2018. - № 4(40). - S.11-17. DOIhttps://doi.org/10.20291/2079-0392-2018-4-11-17
15. S. Iwnicki, “Handbook of railway vehicle dynamics,” (Boca Raton: CRC Press, 2006), p. 548.
16. V. Boyko, “Development and Research of the Traction Asynchronous Multimotor Drive,” Thesis on power engineering, electrical engineering, mining engineering (Tallinn University of Technology, 2008), p.116.
17. D. Y. Antipin, V. I. Vorobiev and O. V. Izmerov, “Possibilities of modernization of wheel motor blocks of locomotives,” IOP Conf. Series: Earth and Environmental Science 378, 012004 (2019).
18. Technologies and potential developments for energy efficiency and CO2 reductions in rail systems, (International Union of Railways (UIC), Paris, December 2016), p.187.
19. M.I. Kapitsa, O.M. Hnennyi and D.V. Bobyr, “Efficiency of modernization of wheel-motor blocks (WMB) using anti-friction traction motor support bearings (TMSB),” Science and Transport Progress 4, 111-124 (2018).
20. A.G. Suslov and M.G. Shalygin, “The interrelation of the surface subroughness of martensitic steels with their granularity the quality of mechanical processing,” AIP Conf. Proc. 1785, 040085 (2016).
21. M.G. Shalygin, “Correlation between Nano-Roughness with Grains of Austenitic Steel and Machining Quality,” Fundam. Appl. Sci. 8(3S), 2835-2841 (2016).
22. G. Petrov and A. Tarmaev, “Mathematical Model of Wheel Pairs Movement of a Rail Vehicles,” International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) 1-5. (2018).
23. G. Petrov and A. Tarmaev, “Modeling of railway vehicles movement having deviations in the content of running parts,” Proceedings of the International Conference: Aviamechanical Engineering and Transport (AVENT, 2018), (Series: Advances in Engineering Research, Atlantis Press, 2018), pp. 410-415.
24. A.A. Tarmaev, G.I. Petrov and V.N. Filippov, “Modeling of the dynamics of a carriage taking into account the geometric nonlinearity of displacements and deformation,” Proceedings of the International Conference «Aviamechanical Engineering and Transport» (AVENT 2019), (Series: Advances in Engineering Research, Atlantis Press, 2019), pp. 333-338.
25. L.B. Tsvik, A.A. Tarmaev, I.S. Bocharov and V.K. Eremeev, “Analysis of stresses and deformations of elements of axle boxes and improvement of their shape,” IOP Conf. Ser.: Mater. Sci. Eng. 760, 012064 (2020).
26. Fedonin O.N., Shalygin M.G. Povyshenie korrozionnoy stoykosti i iznosostoykosti izdeliy transportnogo i himicheskogo mashinostroeniya // Naukoemkie tehnologii v mashinostroenii. 2020. № 8. S. 3-10.
27. Suslov A.G., Shalygin M.G. Naukoemkaya tehnologiya povysheniya iznosostoykosti poverhnostey treniya detaley mashin, rabotayuschih v vodorodnyh sredah // Naukoemkie tehnologii v mashinostroenii. 2017. № 2. S. 19-24.
