employee
Bryansk, Bryansk, Russian Federation
employee
Murom, Vladimir, Russian Federation
employee from 16.03.2018 to 16.03.2018
Vladimir, Vladimir, Russian Federation
GRNTI 55.13 Технология машиностроения
GRNTI 55.19 Резание материалов
The article presents data on the influence of the geometric dimensions of the striker on the efficiency of the transmitted energy of shock pulses during wave deformation hardening. As a result of modeling, it was found that increasing the ratio of the striker length to its diameter from 0.1 to 10 allows transmitting 15.6 times more energy of the shock pulse to the deformation center.
impulse, shock system, modeling, material, hardening
1. Kirichek A.V., Solovyov D. L., Lazutkin A. G. technology and equipment for static-pulse processing by surface plastic deformation. Moscow: Mechanical Engineering. - 2004. - 288 p.
2. Kirichek A.V., Barinov S. V. Influence of heterogeneous structure parameters on resistance to contact staining / / Bulletin of the Bryansk state technical University. - 2015. - No. 4 (48). - Pp. 54-58.
3. Kirichek A.V., Barinov S. V. Influence of the processed medium on the efficiency of shock pulse energy transfer during wave deformation hardening / / Bulletin of the Bryansk state technical University. - 2019. - No. 11. - P. 13-18.
4. Alexandrov E. V., Sokolinsky V. B. Applied theory and calculations of shock systems. Moscow: Nauka. - 1969. - 201 p.
5. Alimov O. D., Manzhosov V. K., Eremyants V. E., Martynenko L. M. Calculation of shock systems with non-axial collision of elements. Frunze: Ilim. - 1979. - 109 p.
6. Kirichek A.V., Barinov S. V., Yashin A.V. Study of the influence of the geometric dimensions of the striker on the efficiency of energy transfer of shock pulses during wave deformation hardening / / Innovations in mechanical engineering: proceedings of the X International scientific and practical conference / pod. edited by V. J. Blumenstein. - Kemerovo: KuzGTU, 2019 - 860 p.
