USING GRADIENT METHODS TO OPTIMIZE THE CALCULATION OF PROCESSING MODE PARAMETERS
Abstract and keywords
Abstract (English):
Recommendations on the use of gradient descent methods and penalty functions for optimizing the selection of cutting mode parameters according to the maximum performance criteria are presented. the results of calculations are presented.

Keywords:
optimization, gradient descent method, penalty function method, iteration step
References

1. Amosov, A. A. Computational methods for engineers: studies. manual / A. A. Amosov, Yu. a. Dubinsky, N. V. .Kopchenova. - M.: Higher. SHK., 1994. - 544c – - ISBN 5-06-000625-5.

2. Biryukov, R. S. optimization Methods in examples and problems: an educational and methodological guide/ R. S. Biryukov [et al.]. - Nizhny Novgorod: Nizhny Novgorod state University, 2010. - 101 p. – ISBN 676-07-1225-1915-3.

3. Grebennikova, I. V. optimization Methods: studies. Handbook/ I. V. Grebennikova. - Yekaterinburg: Urfu, 2017. - 148 p. – ISBN 978-5-7996-2090-5.

4. Ravindran, G. Optimization techniques: translation from English. in 2 kN. kN. 1. G. Ravindran, A. Ravindran, K. Ragsdell. - Moscow: Mir, 1986. - 350C – - ISBN 041-01-86-154-86.

5. Ryzhov, E. V. Optimization of technological processes of mechanical processing/ E. V. Ryzhov, V. I. Averchenkov. - Kiev: Nauk. Dumka, 1989.- 192c – - ISBN 5-12-000920-4.

6. Steposhina, S. V., the Definition of mathematical models for choosing rational conditions for processing PPD/ S. V. Steposhina, O. N. Fedonin / / Bulletin of the Bryansk state technical University.- 2015. No. 2 (46). Pp. 82-86. - ISSN: 1999-8775.