TECHNOLOGICAL SUPPORT OF OPERATING TIME FOR FAILURE OF MOLD FORMING EQUIPMENT AT THE MAIN STAGES OF THE LIFE CYCLE
Authors:
1.
Bryansk State Technical University
(Department of Mechanical Engineering Technology, Professor)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
2.
Bryansk State Technical University
(Department of Mechanical Engineering, Head of the Department)
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
3.
Bryansk State Technical University
4.
Bryansk State Technical University
Russian Federation
Russian Federation
Type:
Сonference article
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 55.13 Технология машиностроения
GRNTI 55.13 Технология машиностроения
Language:
Russian
Keywords:
operational properties, quality parameters, accuracy, reliability, time to failure
Abstract (English):
The article deals with the issues of technological support of the operational properties of the elements of the mold forming equipment at the stages of design, manufacture and repair.
The article deals with the issues of technological support of the operational properties of the elements of the mold forming equipment at the stages of design, manufacture and repair.
Keywords:
operational properties, quality parameters, accuracy, reliability, time to failure
operational properties, quality parameters, accuracy, reliability, time to failure
1. Paley M. M. Technology of production of devices of press forms and stamps. - Mechanical engineering, 2009.
2. Suslov, A. G. science-Intensive technology for improving the quality of machine Assembly units at the stages of the life cycle / A. G. Suslov, O. N. Fedonin, E. A. Polsky / / science-Intensive technologies in mechanical engineering. - 2016. - No. 5 (59). From 34 to 42.
3. Polsky, E. A. Technological assurance of accuracy and quality of surfaces of machine parts in the design of route-operational technological process by the method of synthesis based on the analysis of dimensional relationships / E. A. Polsky // science-Intensive technologies in mechanical engineering. - 2016. - No. 10 (64). From 39-48.
