GRNTI 55.13 Технология машиностроения
An overview of the main directions of improving the environmental friendliness of the process of flat grinding by the periphery of the circle is presented.
environmentally friendly, abrasive blasting, protective curtain of coolant, capturing waste
1. Progressive tools and technologies of grinding: a collection monograph / Ardashev D. V., Gusev V. G., Diakonov A. A., Vasilenko Yu. V., Tyukhta A.V., etc. / edited by A.V. Kirichek. - Moscow: publishing house "Spectrum", 2013. - 320 p.
2. Bubnov, D. G. Influence of coolant purity on the roughness of polished surfaces on operations of flat grinding by the periphery of the circle / D. G. Bubnov, P. A. Lukyanenko, V. V. Bogdanov / / Young science-new Millennium: TEZ. docl. international. science.- tech. Conf. - 1996. - Part 1. - Pp. 111-112.
3. Khudobin, L. V. Lube-cooling technological means and their use in cutting processing: a reference book / L. V. Khudobin, A. p. Babichev, E. M. Bulyzhev; under the General ed. of L. V. Khudobin. - Moscow: Mashinostroenie, 2006. - 544 p., Il.
4. Patent 2158669 of the Russian Federation. A method for protecting the cutting zone from the spread of vapors and splashes of lubricating coolant (coolant) and a device for its implementation / Terekhov V. M.; Application no. 98122553/02 of 09.12.1998; publ. 10.11.2000.
5. Patent US 5594972A. Collector for collecting dust and waste / Edward P. Iversen; application no. US08515511 of 15.08.1995; publ. 21.01.1997.
6. Patent US 3651607A. Collector for waste collection / Leighton Lee; application no. US3651607A of 29.10.1969; publ. 28.03.1972.
7. List of methodological documents for calculating emissions of pollutants into the atmosphere. - SPb.: Institute of Atmosphere, 1997. - 10 sec.
8. A. V. de Mello et al. Surface Grinding of Ti-6Al-4V Alloy with SiC Abrasive Wheel at Various Cutting Conditions //Procedia Manufacturing. - 2017. - T. 10. - Pp. 590-600.
9. T. Nguyen, L. C. Zhang, An assessment of the applicability of cold air and oil mist in surface grinding //Journal of Materials Processing Technology. - 2003. - T. 140. - no. 1-3. - Pp. 224-230.
10. Verma N., ManojKumar K., Ghosh A. Characteristics of aerosol produced by an internal-mix nozzle and its influence on the force, residual stress and surface finish in grinding SQCL //Journal of Materials Processing Technology. - 2017. - T. 240. - Pp. 223-232.
11. Tyukhta, A.V. Practical application of the COMBINATORIAL method of coolant supply. / A.V. Tyukhta / / Fundamental and applied problems of modernizing modern mechanical engineering and metallurgy: collection of scientific papers of the ISTC dedicated to the 50th anniversary of the Department of engineering technology of LGTU. - 2012. - Part 2. Pp. 24-29.
12. Vasilenko, O. A. Expansion of the functional properties of coolant during flat grinding by the periphery of the circle / O. A. Vasilenko, V. G. Semenov, A.V. Tyukhta, Yu. V. Vasilenko / / Fundamental and applied problems of engineering and technology. - 2014. - No. 6. - Pp. 115-119.
13. Patent 2708485 of the Russian Federation. A device for supplying a lubricant-cooling liquid during flat grinding with the periphery of the circle / Vasilenko Yu. V., Vasilenko O. A.; Application no. 2019121789 of 09.07.2019; publ. 09.12.2019.
14. Current state of the coolant supply technique during grinding / Vasilenko Yu. V. / / reference Book. Engineering magazine with app. - 2005., No. 4. - P. 29.
15. Theoretical substantiation of the development of a combined coolant supply technique for flat grinding with the periphery of the circle / Vasilenko O. A., Semenov V. G., Tyukhta A.V., Vasilenko Yu. V., Stepanov Yu.S. / / Fundamental and applied problems of engineering and technology. -2014., No. 5 (307). - Pp. 72-78.
