MODERNIZATION OF THE AUTOMATION SYSTEM OF THE SAWING AND SORTING UNITS OF THE LOGGING LINE
Section: INFORMATIONAL MEASURING SYSTEMS
Authors:
1.
Bryanskiy gosudarstvennyy tehnicheskiy universitet
employee
Bryansk, Russian Federation
employee
Bryansk, Russian Federation
2.
Bryanskiy gosudarstvennyy tehnicheskiy universitet
Russian Federation
Russian Federation
3.
Bryansk State Technical University
employee from 01.01.1996 until now
Bryansk, Bryansk, Russian Federation
employee from 01.01.1996 until now
Bryansk, Bryansk, Russian Federation
Type:
Сonference article
Published:
20.02.2020
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 47.01 Общие вопросы электроники и радиотехники
BBK 302 Проектирование
GRNTI 47.01 Общие вопросы электроники и радиотехники
BBK 302 Проектирование
Language:
Russian
Keywords:
PLC, SCADA systems, IDE, analog and mixed signals
Abstract (English):
The article describes the solution to the problem of automating the line for sawing and sorting wood using PLC, CoDeSys, SCADA Trace Mode. A comparison of the integrated development environments for the PLC and HMI - CoDeSys and Trace Mode.
The article describes the solution to the problem of automating the line for sawing and sorting wood using PLC, CoDeSys, SCADA Trace Mode. A comparison of the integrated development environments for the PLC and HMI - CoDeSys and Trace Mode.
Keywords:
PLC, SCADA systems, IDE, analog and mixed signals
PLC, SCADA systems, IDE, analog and mixed signals
1. Gerasimov, A.V. Proektirovanie ASUTP s ispol'zovaniem SCADA-sistem/ A.V. Gerasimov, A.S. Titovcev. - Kazan': KNITU, 2014. - 128 s.
2. TRACE MODE 6 & T-FACTORY. Rukovodstvo pol'zovatelya: PDF: versiya 6. - M.: AdAstra Research Group, Ltd., 2006.
3. Rukovodstvo pol'zovatelya po programmirovaniyu PLK v CoDeSys 2.3 / Smart Software Solutions // [Elektronnyy resurs]. - 2008. - URL: https://ftp.owen.ru/CoDeSys23/06_Documentation/Cds23_Manual_v2.8.pdf.
