USING CAD FOR STRESS ANALYSIS IN THE DESIGN OF KEYS FOR ORTHOPEDIC INSTRUMENTS
Authors:
1.
Sevastopol State University
2.
Sevastopol State University
3.
Sevastopol State University
4.
Sevastopol State University
5.
Sevastopol State University
Type:
Сonference article
Published:
20.02.2020
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 47.01 Общие вопросы электроники и радиотехники
BBK 302 Проектирование
GRNTI 47.01 Общие вопросы электроники и радиотехники
BBK 302 Проектирование
Language:
Russian
Keywords:
finite element method, stress analysis, Autodesk Inventor, key for orthopedic instrument
Abstract (English):
The possibilities of using Autodesk Inventor for stress analysis in the design of keys for orthopedic instruments are considered. The stages of the simulation are shown. A stress analysis of one of the keys is performed, which previously confirmed the compliance of the developed design with the requirements for such products.
The possibilities of using Autodesk Inventor for stress analysis in the design of keys for orthopedic instruments are considered. The stages of the simulation are shown. A stress analysis of one of the keys is performed, which previously confirmed the compliance of the developed design with the requirements for such products.
Keywords:
finite element method, stress analysis, Autodesk Inventor, key for orthopedic instrument
finite element method, stress analysis, Autodesk Inventor, key for orthopedic instrument
1. Koncevich, V.G. Tverdotel'noe modelirovanie mashinostroitel'nyh izdeliy v Autodesk Inventor / V.G. Koncevich. - Kiev, Moskva: DiaSoftYuP, DMK Press, 2007. - 672 s.
2. Balakin, A.I. Komp'yuterno-integrirovannoe proektirovanie: ucheb. posobie / A.I. Balakin, L.E Kartashov, V.Ya. Kopp, O.V. Filipovich. - Sevastopol': SevNTU, 2014. - 170 s.
3. GOST 12483-67. Plunzhery. Konstrukciya (s Izmeneniyami N 1, 2) M.: IPK Izdatel'stvo standartov, 2000. - 4 s.
