Abstract and keywords
Abstract (English):
The article deals with the design process of low-frequency rectangular electrical connectors and determining the position CAD/CAE-systems in it. The review of the actual literature shows that development trends of design and technological preparation of low-frequency rectangular electrical connectors production mean using CAD/CAM/CAE-systems. But at the moment these systems are used for solving partial issues. The authors formalize the empirical method of the design and systemize the factors, which influence the design process. As a result of the mentioned above actions, the working algorithm of the multipurpose CAD/CAE electrical connectors design system was obtained. The results of the research were applied to automize the design process of connectors housings.

rectangular electrical connectors, CAD, design, design stages, CAD algorithms

1. Akulov P.A., Petreshin D.I. Automation of controloperation of electrical connectors verification //Automation. Modern technologies. -2019. - Vol. 73. - №. 6.P. 257-262.

2. Akulov P.A., Petreshin D.I. Automated system of electricalconnectors testing for wear resistance // Mechatronics,Automation and Robotics. -2019. -№ 3. P. 151-154.

3. Albers A. Modeling and design of contacts in electricalconnectors/ A. Albers, P. Martin, B. Lorentz// Internationalconference on engineering design; Technical university ofDenmark. -Kgs. Lyngby, -2011.

4. Vasiliev V.A., Kalmykova M.A. Analysis and choice ofsoftware products for engineering problems solution ininstrument engineering // Modern engineering andtechnologies. -2013. -№ 3 [Electronic resource]. URL: (date of access:13.08.2019).

5. GOST 2.103-2013 Unified system of design documentation(ESKD). Development stages (with Amendment) [Text].[Electronic resource]. URL: (date of access:07.05.2019).

6. GOST 14312-79 Electrical terminals. Terms and definitions [Text]. [Electronic resource]. URL: (date of access:07.05.2019).

7. GOST 21962-76 Electrical connectors. Terms anddefinitions [Text]. [Electronic resource]. URL: (date of access:07.11.2018).

8. GOST 23784-98 Low-frequency connectors low-voltageand combined. General specifications [Text.] [Electronicresource]. URL: of access: 07.05.2019).

9. Guan L. Modeling and Analysis of Electrical Connectors inSalt Spray Environment/ L.Guan, Y. Li, Ch. Feng, Q. Li, Y.Zhou, J. Gao// International Conference on ComputerModeling, Simulation and Algorithm. -2018.

10. Irzayev G.Kh. Design selection model based on quantitativecriteria in the system of ensuring manufacturability ofproducts // Systems. Methods. Technologies. -2014. -№ 2(22). P.108-113.

11. Irzayev, G.Kh. Numerical method of radioelectronic devicedesign optimization based on manufacturability criterion/Bulletin of Dagestan State Technical University. TechnicalSciences. - 2013. - №1 (28) [Electronic resource]. URL: (date of access: 25.08.2019).

12. Levin, A.P. Electrical connectors terminals in electronicequipment (calculation and design). Moscow, "SovietRadio" publishing house, 1972, 216p.

13. Luo Y. Numerical analysis and experimental verification onstress field of electrical connector contact [J. / Y.Luo,J.Yang, X.Liu, X.Li // Chinese Journal of EngineeringDesign] -2016.

14. Malpass L., SolidWorks API Series 1: Programming &Automation/ - January 9, 2014. -166 pages.

15. Pivovarov V. Analysis of global development trends andproduction problems of electric connectors/ V. Pivovarov,L. Safonov, I. Khokhlov // Components and Technologies.-2007. -№2. - P.94-97.

16. Podmasteriev K.V. Practical application of risk assessmentmodel for quality control of electrical connectors contactpairs /K.V. Podmasteriev, V.V. Markov, A.V.Smetannikov, A.N. Lukyanchikov // Fundamental and Applied Problems of Engineering and Technology. 2017. -№ 6 (326). P. 172-180

17. Safonov A.L. Automation of electrical connectors designbased on formalization and standardizing of designprocedures: Dissertation abstract in candidacy for anacademic degree of Ph.D. in technical sciences: 05.13.12/Safonov Alexander Leonidovich; BSTU. - Bryansk, 2010. -22 p.

18. Safonov A.L. Optimization of electrical connectorsstructural elements / Software products and systems. -2009.-№4 [Electronic resource]. URL: (date of access:25.08.2019).

19. Safonov A.L., Safonov L.I. Rectangular electricalconnectors / A.L. Safonov, L.I. Safonov - St. Petersburg.:LLC "Finstreet Publishing", 2011. - 328c.: ill., table.Safonov A., Safonov L. Rectangular electrical connectors.Modern tendencies of statistical methods development forproduct quality management // Technologies in electronicindustry. -2013. -№ 7 (67). P. 86-91.

20. Utkin G.I. Analysis of the state of electrical connectorsindustrial production and tendencies of its development/G.I. Utkin// Fundamental and applied problems ofengineering and technology. - 2012. - № 3-3 (293). - P. 134-139.

21. Yeryomin, A. Ways rectangular low-frequency connectorsproduction development in Russia/ A. Yeryomin, A.Kiselyov, A. Shadrin // Modern electronics. -2013. - № 6 [Electronic resource]. URL: (date of access: 13.08.2019).

Login or Create
* Forgot password?