USING CIRCUIT SIMULATION FOR CHECKING THE METHODS OF SYNTHESIS OF CORRECTING CIRCUITS OF SWITCH-MODE POWER SUPPLIES

Amelina Marina Arkad'evna; Amelin Aleksandr

doi:doi:10.30987/conferencearticle_5c19e5df1d8d31.70501716

USING CIRCUIT SIMULATION FOR CHECKING THE METHODS OF SYNTHESIS OF CORRECTING CIRCUITS OF SWITCH-MODE POWER SUPPLIES

Submit manuscript Download PDF
Text

To cite

USING CIRCUIT SIMULATION FOR CHECKING THE METHODS OF SYNTHESIS OF CORRECTING CIRCUITS OF SWITCH-MODE POWER SUPPLIES

Section: THE USE OF CAD IN ELECTRONICS, PHYSICS, RADIO ENGINEERING AND MODERN INDUSTRY.

Proceedings: CAD/EDA, MODELING AND SIMULATION IN MODERN ELECTRONICS. PART 1

UDK 62 Инженерное дело. Техника в целом. Транспорт GRNTI 50.51 Автоматизация проектирования BBK 302 Проектирование TBK 5136 Системы автоматического проектирования

Amelina Marina Arkad'evna ¹

Amelin Aleksandr ²

Author and publication information

Authors:

1. branch of National Research University “MPEI” (Candidate of Technical Sciences, Assistant Professor; Assistant Professor of the Department of Electronics and Microprocessor Technology)
employee
Smolensk, Smolensk, Russian Federation

2. Smolensk Branch of the National Research University «Moscow Power Engineering Institute»
student
Smolensk, Smolensk, Russian Federation

Type:

Сonference article

DOI:

https://doi.org/10.30987/conferencearticle_5c19e5df1d8d31.70501716

Published:

22.12.2018

Subject area:

UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 50.51 Автоматизация проектирования
BBK 302 Проектирование
TBK 5136 Системы автоматического проектирования

Language:

Russian

Keywords:

switching voltage regulator, power switch controller, stability, correction circuits, opto-isolator amplifier, logarithmic amplitude-frequency response, pole, zero

Abstract and keywords

Abstract (English):
The method for the synthesis of correction circuits of Switch-mode Power Supplies using a feedback path with galvanic optoelectronic isolation is offered. The frequency characteristics of the feedback path with correction circuits calculated by the proposed method were simulated. The applicability of the developed technique and the possibility of its use in the design and use of controllers for driving power switches with integrated electrical isolation is shown.

Keywords:
switching voltage regulator, power switch controller, stability, correction circuits, opto-isolator amplifier, logarithmic amplitude-frequency response, pole, zero

Text

Publication text (PDF): Read Download

References

2. Meleshin, V.I. Upravlenie tranzistornymi preobrazovatelyami elektroenergii / V.I. Meleshin, D.A. Ovchinnikov. - M.: Tehnosfera, 2011. - 576 s.

3. Amelina, M.A. Metodika rascheta staticheskogo rezhima usilitelya rassoglasovaniya na osnove mikroshemy TL431/ M.A. Amelina, A.I. Gatina // ENERGETIKA, INFORMATIKA, INNOVACII-2015 - EII-2015: sbornik trudov: V 2 t. - Smolensk: Universum, 2015. - T.1. - Sekcii 1,2,3,4. - 506 s.: il. (s. 245-250).

4. Amelina, M.A. Programma shemotehnicheskogo modelirovaniya Micro-Cap. Versii 9, 10. [Elektronnyy resurs]: ucheb. posobie / M.A. Amelina, S.A. Amelin- Elektron. tekstovye dan. - SPb. : Lan', 2014. - 632 s. Rezhim dostupa: URL http://e.lanbook.com/books/element.php?pl1_id=53665

Submit manuscript Download PDF
Text

To cite

Citations:

Confirmation

Регистрация